RE: [PATCH] arm64: dts: exynos: correct GIC CPU interfaces address range on Exynos7

["Alim Akhtar" <alim.akhtar@samsung.com>]

Hi Krzysztof,

> -----Original Message-----
> From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> Sent: 05 August 2021 13:07
> To: Rob Herring <robh+dt@kernel.org>; devicetree@vger.kernel.org; linux-
> arm-kernel@lists.infradead.org; linux-samsung-soc@vger.kernel.org; linux-
> kernel@vger.kernel.org
> Cc: Alim Akhtar <alim.akhtar@samsung.com>; Chanwoo Choi
> <cw00.choi@samsung.com>; Pankaj Dubey <pankaj.dubey@samsung.com>;
> Sam Protsenko <semen.protsenko@linaro.org>; Marc Zyngier
> <maz@kernel.org>
> Subject: Re: [PATCH] arm64: dts: exynos: correct GIC CPU interfaces address
> range on Exynos7
> 
> On 05/08/2021 09:21, Krzysztof Kozlowski wrote:
> > The GIC-400 CPU interfaces address range is defined as 0x2000-0x3FFF
> > (by ARM).
> >
> 
Looking at DDI0471B_gic400_r0p1_trm.pdf, CPU interface range is 0x0000 ~ 0x10000

> I underestimated the issue - this is actually bug as there is a GICC_DIR
> register at offset 0x1000. Therefore:
> 
Looking at the exynos7 and exynos5433 UMs looks like GICC_DIR is at offset 0x2100 (from 0x1100_0000 GIC base)
It is possible for you to cross check once?

> Fixes: b9024cbc937d ("arm64: dts: Add initial device tree support for
> exynos7")
> 
> > Reported-by: Sam Protsenko <semen.protsenko@linaro.org>
> > Reported-by: Marc Zyngier <maz@kernel.org>
> > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> > ---
> >  arch/arm64/boot/dts/exynos/exynos7.dtsi | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi
> > b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> > index 8b06397ba6e7..c73a597ca66e 100644
> > --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
> > +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> > @@ -137,7 +137,7 @@ gic: interrupt-controller@11001000 {
> >  			#address-cells = <0>;
> >  			interrupt-controller;
> >  			reg =	<0x11001000 0x1000>,
> > -				<0x11002000 0x1000>,
> > +				<0x11002000 0x2000>,
> >  				<0x11004000 0x2000>,
> >  				<0x11006000 0x2000>;
> >  		};
> >
> 
> 
> Best regards,
> Krzysztof