From: <sean.wang@mediatek.com>
To: robh+dt@kernel.org, matthias.bgg@gmail.com, mark.rutland@arm.com,
devicetree@vger.kernel.org, linux-mediatek@lists.infradead.org
Cc: john@phrozen.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Sean Wang <sean.wang@mediatek.com>
Subject: [PATCH v5 09/10] arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
Date: Mon, 31 Jul 2017 15:36:42 +0800 [thread overview]
Message-ID: <03f3fe78a96588ae9bd62e0dc1c4b0a9fa1f933c.1501486190.git.sean.wang@mediatek.com> (raw)
In-Reply-To: <cover.1501486190.git.sean.wang@mediatek.com>
From: Sean Wang <sean.wang@mediatek.com>
Add support for the Bananapi R2 (BPI-R2) development board from
BIPAI KEJI. Detailed hardware information for BPI-R2 which could be
found on http://www.banana-pi.org/r2.html
The patch added nodes into the SoC-level file mt7623.dtsi such as CPU OPP
table and thermal zone treating CPU as one of cooling devices and also
added nodes into board-level file mt7623n-bananapi-bpi-r2.dts such as
MediaTek GMAC, MT7530 Switch, the crypto engine, USB, IR, I2S, I2C, UART,
SPI, PWM, GPIO keys, GPIO LEDs and PMIC LEDs. As to the other missing
hardware and peripherals, they would be added and integrated continuously.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/mediatek.txt | 2 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/mt7623.dtsi | 120 +++++-
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 443 +++++++++++++++++++++
4 files changed, 561 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index ae011b2..1caa9d2 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -49,6 +49,8 @@ Supported boards:
- Reference board for MT7623n with NAND:
Required root node properties:
- compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
+- Bananapi BPI-R2 board:
+ - compatible = "bananapi,bpi-r2", "mediatek,mt7623";
- MTK mt8127 tablet moose EVB:
Required root node properties:
- compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f3a2442..736abbf 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1050,6 +1050,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt6589-aquaris5.dtb \
mt6592-evb.dtb \
mt7623n-rfb-nand.dtb \
+ mt7623n-bananapi-bpi-r2.dtb \
mt8127-moose.dtb \
mt8135-evbp1.dtb
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 937a550..86cab5c 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -21,12 +21,58 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/reset/mt2701-resets.h>
+#include <dt-bindings/thermal/thermal.h>
#include "skeleton64.dtsi"
/ {
compatible = "mediatek,mt7623";
interrupt-parent = <&sysirq>;
+ cpu_opp_table: opp_table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-98000000 {
+ opp-hz = /bits/ 64 <98000000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-198000000 {
+ opp-hz = /bits/ 64 <198000000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-398000000 {
+ opp-hz = /bits/ 64 <398000000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-598000000 {
+ opp-hz = /bits/ 64 <598000000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-747500000 {
+ opp-hz = /bits/ 64 <747500000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-1040000000 {
+ opp-hz = /bits/ 64 <1040000000>;
+ opp-microvolt = <1150000>;
+ };
+
+ opp-1196000000 {
+ opp-hz = /bits/ 64 <1196000000>;
+ opp-microvolt = <1200000>;
+ };
+
+ opp-1300000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1300000>;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -36,21 +82,31 @@
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x0>;
+ clocks = <&infracfg CLK_INFRA_CPUSEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
+ cooling-min-level = <0>;
+ cooling-max-level = <7>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x1>;
+ operating-points-v2 = <&cpu_opp_table>;
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x2>;
+ operating-points-v2 = <&cpu_opp_table>;
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x3>;
+ operating-points-v2 = <&cpu_opp_table>;
};
};
@@ -74,6 +130,56 @@
clock-output-names = "clk26m";
};
+ thermal-zones {
+ cpu_thermal: cpu_thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&thermal 0>;
+
+ trips {
+ cpu_passive: cpu_passive {
+ temperature = <47000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_active: cpu_active {
+ temperature = <67000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu_hot: cpu_hot {
+ temperature = <87000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_crit {
+ temperature = <107000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_passive>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu_active>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map2 {
+ trip = <&cpu_hot>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupt-parent = <&gic>;
@@ -172,7 +278,7 @@
clock-names = "spi", "wrap";
};
- cir: cir@0x10013000 {
+ cir: cir@10013000 {
compatible = "mediatek,mt7623-cir";
reg = <0 0x10013000 0 0x1000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
@@ -193,7 +299,7 @@
efuse: efuse@10206000 {
compatible = "mediatek,mt7623-efuse",
"mediatek,mt8173-efuse";
- reg = <0 0x10206000 0 0x1000>;
+ reg = <0 0x10206000 0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
thermal_calibration_data: calib@424 {
@@ -561,7 +667,8 @@
};
u3phy1: usb-phy@1a1c4000 {
- compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy";
+ compatible = "mediatek,mt7623-u3phy",
+ "mediatek,mt2701-u3phy";
reg = <0 0x1a1c4000 0 0x0700>;
clocks = <&clk26m>;
clock-names = "u3phya_ref";
@@ -599,7 +706,8 @@
};
u3phy2: usb-phy@1a244000 {
- compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy";
+ compatible = "mediatek,mt7623-u3phy",
+ "mediatek,mt2701-u3phy";
reg = <0 0x1a244000 0 0x0700>;
clocks = <&clk26m>;
clock-names = "u3phya_ref";
@@ -639,7 +747,9 @@
};
eth: ethernet@1b100000 {
- compatible = "mediatek,mt2701-eth", "syscon";
+ compatible = "mediatek,mt7623-eth",
+ "mediatek,mt2701-eth",
+ "syscon";
reg = <0 0x1b100000 0 0x20000>;
interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>,
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
new file mode 100644
index 0000000..9f3e6dd
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -0,0 +1,443 @@
+/*
+ * Copyright 2017 Sean Wang <sean.wang@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7623.dtsi"
+#include "mt6323.dtsi"
+
+/ {
+ model = "Bananapi BPI-R2";
+ compatible = "bananapi,bpi-r2", "mediatek,mt7623";
+
+ aliases {
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ cpus {
+ cpu@0 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@1 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@2 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@3 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&key_pins_a>;
+
+ factory {
+ label = "factory";
+ linux,code = <BTN_0>;
+ gpios = <&pio 256 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_a>;
+
+ red {
+ label = "bpi-r2:pio:red";
+ gpios = <&pio 239 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green {
+ label = "bpi-r2:pio:green";
+ gpios = <&pio 240 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue {
+ label = "bpi-r2:pio:blue";
+ gpios = <&pio 241 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ memory@80000000 {
+ reg = <0 0x80000000 0 0x40000000>;
+ };
+};
+
+&cir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cir_pins_a>;
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+ð {
+ status = "okay";
+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "trgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+
+ mdio: mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ switch@0 {
+ compatible = "mediatek,mt7530";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ pinctrl-names = "default";
+ reset-gpios = <&pio 33 0>;
+ core-supply = <&mt6323_vpa_reg>;
+ io-supply = <&mt6323_vemc3v3_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ port@0 {
+ reg = <0>;
+ label = "wan";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan0";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan1";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan2";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan3";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "trgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&pio {
+ cir_pins_a:cir@0 {
+ pins_cir {
+ pinmux = <MT7623_PIN_46_IR_FUNC_IR>;
+ bias-disable;
+ };
+ };
+
+ i2c0_pins_a: i2c@0 {
+ pins_i2c0 {
+ pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
+ <MT7623_PIN_76_SCL0_FUNC_SCL0>;
+ bias-disable;
+ };
+ };
+
+ i2c1_pins_a: i2c@1 {
+ pin_i2c1 {
+ pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>,
+ <MT7623_PIN_58_SCL1_FUNC_SCL1>;
+ bias-disable;
+ };
+ };
+
+ i2s0_pins_a: i2s@0 {
+ pin_i2s0 {
+ pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>,
+ <MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>,
+ <MT7623_PIN_73_I2S0_LRCK_FUNC_I2S0_LRCK>,
+ <MT7623_PIN_74_I2S0_BCK_FUNC_I2S0_BCK>,
+ <MT7623_PIN_126_I2S0_MCLK_FUNC_I2S0_MCLK>;
+ drive-strength = <MTK_DRIVE_12mA>;
+ bias-pull-down;
+ };
+ };
+
+ i2s1_pins_a: i2s@1 {
+ pin_i2s1 {
+ pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>,
+ <MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>,
+ <MT7623_PIN_35_I2S1_BCK_FUNC_I2S1_BCK>,
+ <MT7623_PIN_36_I2S1_LRCK_FUNC_I2S1_LRCK>,
+ <MT7623_PIN_37_I2S1_MCLK_FUNC_I2S1_MCLK>;
+ drive-strength = <MTK_DRIVE_12mA>;
+ bias-pull-down;
+ };
+ };
+
+ key_pins_a: keys@0 {
+ pins_keys {
+ pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,
+ <MT7623_PIN_257_GPIO257_FUNC_GPIO257> ;
+ input-enable;
+ };
+ };
+
+ led_pins_a: leds@0 {
+ pins_leds {
+ pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>,
+ <MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>,
+ <MT7623_PIN_241_EXT_SCK_FUNC_GPIO241>;
+ };
+ };
+
+ mmc0_pins_default: mmc0default {
+ pins_cmd_dat {
+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
+ <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pins_clk {
+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
+ bias-pull-down;
+ };
+
+ pins_rst {
+ pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
+ bias-pull-up;
+ };
+ };
+
+ mmc0_pins_uhs: mmc0 {
+ pins_cmd_dat {
+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
+ <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_2mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins_clk {
+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
+ drive-strength = <MTK_DRIVE_2mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins_rst {
+ pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
+ bias-pull-up;
+ };
+ };
+
+ mmc1_pins_default: mmc1default {
+ pins_cmd_dat {
+ pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
+ <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
+ <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
+ <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
+ <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_clk {
+ pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
+ bias-pull-down;
+ drive-strength = <MTK_DRIVE_4mA>;
+ };
+ };
+
+ mmc1_pins_uhs: mmc1 {
+ pins_cmd_dat {
+ pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
+ <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
+ <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
+ <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
+ <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_clk {
+ pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+ };
+
+ spi0_pins_a: spi@0 {
+ pins_spi {
+ pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
+ <MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
+ <MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>,
+ <MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>;
+ bias-disable;
+ };
+ };
+
+ pwm_pins_a: pwm@0 {
+ pins_pwm {
+ pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
+ <MT7623_PIN_204_PWM1_FUNC_PWM1>,
+ <MT7623_PIN_205_PWM2_FUNC_PWM2>,
+ <MT7623_PIN_206_PWM3_FUNC_PWM3>,
+ <MT7623_PIN_207_PWM4_FUNC_PWM4>;
+ };
+ };
+
+ uart0_pins_a: uart@0 {
+ pins_dat {
+ pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
+ <MT7623_PIN_80_UTXD0_FUNC_UTXD0>;
+ };
+ };
+
+ uart1_pins_a: uart@1 {
+ pins_dat {
+ pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,
+ <MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
+ };
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins_a>;
+ status = "okay";
+};
+
+&pwrap {
+ mt6323 {
+ mt6323led: led {
+ compatible = "mediatek,mt6323-led";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "bpi-r2:isink:green";
+ default-state = "off";
+ };
+ led@1 {
+ reg = <1>;
+ label = "bpi-r2:isink:red";
+ default-state = "off";
+ };
+ led@2 {
+ reg = <2>;
+ label = "bpi-r2:isink:blue";
+ default-state = "off";
+ };
+ };
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "disabled";
+};
+
+&u3phy1 {
+ status = "okay";
+};
+
+&u3phy2 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_a>;
+ status = "disabled";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb1 {
+ vusb33-supply = <&mt6323_vusb_reg>;
+ status = "okay";
+};
+
+&usb2 {
+ vusb33-supply = <&mt6323_vusb_reg>;
+ status = "okay";
+};
--
2.7.4
next prev parent reply other threads:[~2017-07-31 7:36 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-31 7:36 [PATCH v5 00/10] arm: dts: extend mt7623 support sean.wang
2017-07-31 7:36 ` [PATCH v5 02/10] dt-bindings: arm: mediatek: add bindings for mediatek MT7623a SoC Platform sean.wang
2017-07-31 7:36 ` [PATCH v5 04/10] arm: dts: mt7623: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi sean.wang
[not found] ` <cover.1501486190.git.sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-07-31 7:36 ` [PATCH v5 01/10] dt-bindings: arm: mediatek: update for MT7623n SoC and relevant boards sean.wang-NuS5LvNUpcJWk0Htik3J/w
2017-07-31 7:36 ` [PATCH v5 03/10] arm: dts: mt7623: add mt6323.dtsi file sean.wang-NuS5LvNUpcJWk0Htik3J/w
[not found] ` <f92864cf04cc3ddde20f25d402d8e5d3d915b2a8.1501486190.git.sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-08-02 1:47 ` Yingjoe Chen
2017-08-02 2:02 ` Sean Wang
2017-07-31 7:36 ` [PATCH v5 05/10] ARM: mediatek: add MT7623a smp bringup code sean.wang-NuS5LvNUpcJWk0Htik3J/w
2017-07-31 7:36 ` [PATCH v5 06/10] arm: dts: mt7623: cleanup the mt7623n rfb uart nodes sean.wang-NuS5LvNUpcJWk0Htik3J/w
2017-07-31 7:36 ` [PATCH v5 07/10] arm: dts: mt7623: enable the usb device on the mt7623n rfb sean.wang-NuS5LvNUpcJWk0Htik3J/w
2017-07-31 7:36 ` [PATCH v5 08/10] arm: dts: mt7623: enable the nand device on the mt7623n nand rfb sean.wang-NuS5LvNUpcJWk0Htik3J/w
2017-08-01 12:05 ` [PATCH v5 00/10] arm: dts: extend mt7623 support Matthias Brugger
2017-07-31 7:36 ` sean.wang [this message]
2017-07-31 7:36 ` [PATCH v5 10/10] arm: dts: mt7623: add clock-frequency to CPU nodes sean.wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=03f3fe78a96588ae9bd62e0dc1c4b0a9fa1f933c.1501486190.git.sean.wang@mediatek.com \
--to=sean.wang@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=john@phrozen.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).