* [PATCH 1/5] dt-bindings: pci: Add ARTPEC-8 PCIe controller
[not found] <CGME20220328014857epcms2p7d8cfd98d60f059916ef35ccc385bc004@epcms2p7>
@ 2022-03-28 1:48 ` 이왕석
2022-03-28 18:41 ` Krzysztof Kozlowski
0 siblings, 1 reply; 2+ messages in thread
From: 이왕석 @ 2022-03-28 1:48 UTC (permalink / raw)
To: robh+dt@kernel.org, krzk+dt@kernel.org, kishon@ti.com,
vkoul@kernel.org, linux-kernel@vger.kernel.org,
jesper.nilsson@axis.com, lars.persson@axis.com
Cc: bhelgaas@google.com, linux-phy@lists.infradead.org,
linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
lorenzo.pieralisi@arm.com, kw@linux.com,
linux-arm-kernel@axis.com, kernel@axis.com,
전문기
Add description to support Axis, ARTPEC-8 SoC.
ARTPEC-8 is the SoC platform of Axis Communications
and PCIe controller is designed based on Design-Ware PCIe controller.
Signed-off-by: Wangseok Lee <wangseok.lee@samsung.com>
---
.../bindings/pci/axis,artpec8-pcie-ep.yaml | 110 +++++++++++++++++++
.../devicetree/bindings/pci/axis,artpec8-pcie.yaml | 117 +++++++++++++++++++++
2 files changed, 227 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/axis,artpec8-pcie-ep.yaml
create mode 100644 Documentation/devicetree/bindings/pci/axis,artpec8-pcie.yaml
diff --git a/Documentation/devicetree/bindings/pci/axis,artpec8-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/axis,artpec8-pcie-ep.yaml
new file mode 100644
index 0000000..dc66965
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/axis,artpec8-pcie-ep.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/axis,artpec8-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARTPEC-8 SoC PCIe Controller Device Tree Bindings
+
+maintainers:
+ - Jesper Nilsson <jesper.nilsson@axis.com>
+
+description: |+
+ This PCIe end-point controller is based on the Synopsys DesignWare PCIe IP
+ and thus inherits all the common properties defined in snps,dw-pcie-ep.yaml.
+
+allOf:
+ - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
+
+properties:
+ compatible:
+ const: axis,artpec8-pcie-ep
+
+ reg:
+ items:
+ - description: Data Bus Interface (DBI) registers.
+ - description: Data Bus Interface (DBI2) registers.
+ - description: PCIe address space region.
+
+ reg-names:
+ items:
+ - const: dbi
+ - const: dbi2
+ - const: addr_space
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: PIPE clock, used by the controller to clock the PIPE
+ - description: PCIe dbi clock, ungated version
+ - description: PCIe master clock, ungated version
+ - description: PCIe slave clock, ungated version
+
+ clock-names:
+ items:
+ - const: pipe_clk
+ - const: dbi_clk
+ - const: mstr_clk
+ - const: slv_clk
+
+ phys:
+ maxItems: 1
+
+ num-lanes:
+ const: 2
+
+required:
+ - clocks
+ - clock-names
+ - reg
+ - reg-names
+ - num-lanes
+ - bus-range
+ - interrupts
+ - interrupt-names
+ - samsung,fsys-sysreg
+ - samsung,syscon-phandle
+ - samsung,syscon-bus-s-fsys
+ - samsung,syscon-bus-p-fsys
+ - phys
+ - phy-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ artec8 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ pcie_ep: pcie-ep@17200000 {
+ compatible = "axis,artpec8-pcie-ep";
+ clocks = <&clock_cmu_fsys 39>,
+ <&clock_cmu_fsys 38>,
+ <&clock_cmu_fsys 37>,
+ <&clock_cmu_fsys 36>;
+ clock-names = "pipe_clk", "dbi_clk", "mstr_clk", "slv_clk";
+ reg = <0x0 0x17200000 0x0 0x1000>,
+ <0x0 0x17201000 0x0 0x1000>,
+ <0x2 0x00000000 0x6 0x00000000>;
+ reg-names = "dbi", "dbi2", "addr_space";
+ num-lanes = <2>;
+ bus-range = <0x00 0xff>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "intr";
+ #interrupt-cells = <1>;
+ num-ib-windows = <16>;
+ num-ob-windows = <16>;
+ samsung,fsys-sysreg = <&syscon_fsys>;
+ samsung,syscon-phandle = <&pmu_system_controller>;
+ samsung,syscon-bus-s-fsys = <&syscon_bus_s_fsys>;
+ samsung,syscon-bus-p-fsys = <&syscon_bus_p_fsys>;
+ phys = <&pcie_phy>;
+ phy-names = "pcie_phy";
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pci/axis,artpec8-pcie.yaml b/Documentation/devicetree/bindings/pci/axis,artpec8-pcie.yaml
new file mode 100644
index 0000000..b2cff0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/axis,artpec8-pcie.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/axis,artpec8-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Artpec-8 SoC PCIe Controller Device Tree Bindings
+
+maintainers:
+ - Jesper Nilsson <jesper.nilsson@axis.com>
+
+description: |+
+ This PCIe host controller is based on the Synopsys DesignWare PCIe IP
+ and thus inherits all the common properties defined in snps,dw-pcie.yaml.
+
+allOf:
+ - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+ compatible:
+ const: axis,artpec8-pcie
+
+ reg:
+ items:
+ - description: Data Bus Interface (DBI) registers.
+ - description: External Local Bus interface (ELBI) registers.
+ - description: PCIe configuration space region.
+
+ reg-names:
+ items:
+ - const: dbi
+ - const: elbi
+ - const: config
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: PIPE clock, used by the controller to clock the PIPE
+ - description: PCIe dbi clock, ungated version
+ - description: PCIe master clock, ungated version
+ - description: PCIe slave clock, ungated version
+
+ clock-names:
+ items:
+ - const: pipe_clk
+ - const: dbi_clk
+ - const: mstr_clk
+ - const: slv_clk
+
+ phys:
+ maxItems: 1
+
+ num-lanes:
+ const: 2
+
+required:
+ - clocks
+ - clock-names
+ - reg
+ - reg-names
+ - device_type
+ - ranges
+ - num-lanes
+ - bus-range
+ - interrupts
+ - interrupt-names
+ - samsung,fsys-sysreg
+ - samsung,syscon-phandle
+ - samsung,syscon-bus-s-fsys
+ - samsung,syscon-bus-p-fsys
+ - phys
+ - phy-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ artec8 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ pcie: pcie@17200000 {
+ compatible = "axis,artpec8-pcie";
+ reg = <0x0 0x17200000 0x0 0x1000>,
+ <0x0 0x16ca0000 0x0 0x2000>,
+ <0x7 0x0001e000 0x0 0x2000>;
+ reg-names = "dbi", "elbi", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = </* non-prefetchable memory */
+ 0x83000000 0x0 0x0000000 0x2 0x00000000 0x5 0x00000000
+ /* downstream I/O */
+ 0x81000000 0x0 0x0000000 0x7 0x00000000 0x0 0x00010000>;
+ num-lanes = <2>;
+ bus-range = <0x00 0xff>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "intr";
+ #interrupt-cells = <1>;
+ samsung,fsys-sysreg = <&syscon_fsys>;
+ samsung,syscon-phandle = <&pmu_system_controller>;
+ samsung,syscon-bus-s-fsys = <&syscon_bus_s_fsys>;
+ samsung,syscon-bus-p-fsys = <&syscon_bus_p_fsys>;
+ clocks = <&cmu_fsys 39>,
+ <&cmu_fsys 38>,
+ <&cmu_fsys 37>,
+ <&cmu_fsys 36>;
+ clock-names = "pipe_clk", "dbi_clk", "mstr_clk", "slv_clk";
+ phys = <&pcie_phy>;
+ phy-names = "pcie_phy";
+ };
+ };
+...
--
2.9.5
^ permalink raw reply related [flat|nested] 2+ messages in thread