From: Georgi Djakov <djakov@kernel.org>
To: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>,
shawnguo@kernel.org, s.hauer@pengutronix.de, festevam@gmail.com,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
abel.vesa@nxp.com, abailon@baylibre.com, l.stach@pengutronix.de,
laurent.pinchart@ideasonboard.com, marex@denx.de,
paul.elder@ideasonboard.com, Markus.Niebel@ew.tq-group.com,
aford173@gmail.com
Cc: kernel@pengutronix.de, linux-pm@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-imx@nxp.com,
abelvesa@kernel.org, Peng Fan <peng.fan@nxp.com>
Subject: Re: [PATCH V4] arm64: dts: imx8mp: add NoC node
Date: Thu, 7 Jul 2022 11:43:38 +0300 [thread overview]
Message-ID: <049f9386-fafb-a359-7bc6-6b346b00b0a6@kernel.org> (raw)
In-Reply-To: <20220706234757.3162307-1-peng.fan@oss.nxp.com>
On 7.07.22 2:47, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> Add i.MX8MP NoC node to make the interconnect i.MX8MP driver could work.
> Currently dynamic frequency scaling of the i.MX8MP NoC has not been
> supported, only NoC initial settings are configured by interconnect
> driver.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Looks good to me.
Acked-by: Georgi Djakov <djakov@kernel.org>
> ---
>
> V4:
> Georgi has merged the V3 driver and bindings patches. So only resend
> this patch. Per Georgi's comments:
> - Drop syscon from compatbile
> - Drop the header inclusion
>
> Seems I not see this patch in patchwork or mailist, maybe sent failed.
> So gave a resend of V4.
>
> V3:
> https://lore.kernel.org/linux-arm-kernel/20220703091132.1412063-1-peng.fan@oss.nxp.com/
>
> I not list the full change log, since this is only a minor patch
>
> arch/arm64/boot/dts/freescale/imx8mp.dtsi | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index eb2d516278eb..42ed8ee08548 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -1019,6 +1019,27 @@ eqos: ethernet@30bf0000 {
> };
> };
>
> + noc: interconnect@32700000 {
> + compatible = "fsl,imx8mp-noc", "fsl,imx8m-noc";
> + reg = <0x32700000 0x100000>;
> + clocks = <&clk IMX8MP_CLK_NOC>;
> + #interconnect-cells = <1>;
> +
> + operating-points-v2 = <&noc_opp_table>;
> +
> + noc_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-200M {
> + opp-hz = /bits/ 64 <200000000>;
> + };
> +
> + opp-1000M {
> + opp-hz = /bits/ 64 <1000000000>;
> + };
> + };
> + };
> +
> aips4: bus@32c00000 {
> compatible = "fsl,aips-bus", "simple-bus";
> reg = <0x32c00000 0x400000>;
next prev parent reply other threads:[~2022-07-07 8:43 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-06 23:47 [PATCH V4] arm64: dts: imx8mp: add NoC node Peng Fan (OSS)
2022-07-07 8:43 ` Georgi Djakov [this message]
2022-07-08 8:21 ` Shawn Guo
2025-07-23 17:21 ` Adam Ford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=049f9386-fafb-a359-7bc6-6b346b00b0a6@kernel.org \
--to=djakov@kernel.org \
--cc=Markus.Niebel@ew.tq-group.com \
--cc=abailon@baylibre.com \
--cc=abel.vesa@nxp.com \
--cc=abelvesa@kernel.org \
--cc=aford173@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=l.stach@pengutronix.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=marex@denx.de \
--cc=paul.elder@ideasonboard.com \
--cc=peng.fan@nxp.com \
--cc=peng.fan@oss.nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).