From: "Smitha T Murthy" <smitha.t@samsung.com>
To: <linux-arm-kernel@lists.infradead.org>,
<linux-media@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>
Cc: <m.szyprowski@samsung.com>, <andrzej.hajda@intel.com>,
<mchehab@kernel.org>, <hverkuil-cisco@xs4all.nl>,
<ezequiel@vanguardiasur.com.ar>, <jernej.skrabec@gmail.com>,
<benjamin.gaignard@collabora.com>, <stanimir.varbanov@linaro.org>,
<dillon.minfei@gmail.com>, <david.plowman@raspberrypi.com>,
<mark.rutland@arm.com>, <robh+dt@kernel.org>,
<krzk+dt@kernel.org>, <andi@etezian.org>,
<alim.akhtar@samsung.com>, <aswani.reddy@samsung.com>,
<pankaj.dubey@samsung.com>, <linux-fsd@tesla.com>,
<aakarsh.jain@samsung.com>
Subject: RE: [Patch v2 00/15] Add MFC v12 support.
Date: Wed, 7 Sep 2022 13:16:45 +0530 [thread overview]
Message-ID: <04ba01d8c28d$fcda1e80$f68e5b80$@samsung.com> (raw)
In-Reply-To: <20220907064715.55778-1-smitha.t@samsung.com>
[-- Attachment #1: Type: text/plain, Size: 4296 bytes --]
Hi All,
I have attached the v4l2-complaince complete log (mfc encoder and decoder) along with this mail for reference.
Regards,
Smitha
> -----Original Message-----
> From: Smitha T Murthy [mailto:smitha.t@samsung.com]
> Sent: Wednesday, September 7, 2022 12:17 PM
> To: linux-arm-kernel@lists.infradead.org; linux-media@vger.kernel.org;
> linux-kernel@vger.kernel.org; devicetree@vger.kernel.org
> Cc: m.szyprowski@samsung.com; andrzej.hajda@intel.com;
> mchehab@kernel.org; hverkuil-cisco@xs4all.nl;
> ezequiel@vanguardiasur.com.ar; jernej.skrabec@gmail.com;
> benjamin.gaignard@collabora.com; stanimir.varbanov@linaro.org;
> dillon.minfei@gmail.com; david.plowman@raspberrypi.com;
> mark.rutland@arm.com; robh+dt@kernel.org; krzk+dt@kernel.org;
> andi@etezian.org; alim.akhtar@samsung.com; aswani.reddy@samsung.com;
> pankaj.dubey@samsung.com; linux-fsd@tesla.com;
> smitha.t@samsung.com; aakarsh.jain@samsung.com
> Subject: [Patch v2 00/15] Add MFC v12 support.
>
> From: aakarsh jain <aakarsh.jain@samsung.com>
>
> This patch series adds MFC v12 support. MFC v12 is used in Tesla FSD SoC.
>
> This adds support for following:
>
> * Add support for VP9 encoder
> * Add support for YV12 and I420 format (3-plane)
> * Add support for Rate Control, UHD and DMABUF for encoder
> * Add support for DPB buffers allocation based on MFC requirement
> * Update documentation for control id definitions
>
> Changes since v1:
> - Addressed review comments by Andrzej Hajda.
> - Addressed review comments by Rob Herring.
> - Addressed review comments by Krzysztof Kozlowski.
> - Addressed review comments by Hans Verkuil.
> - Addressed review comments by Nicolas Dufresne.
> - Rebased on latest krzk/for-next tree.
>
> v4l2-complaince:
> Total for s5p-mfc device /dev/video0: 45, Succeeded: 39, Failed: 6, Warnings:
> 0 Total for s5p-mfc device /dev/video1: 45, Succeeded: 34, Failed: 11,
> Warnings: 3
>
> Smitha T Murthy (15):
> dt-bindings: media: s5p-mfc: Add new DT schema for MFC
> dt-bindings: media: s5p-mfc: Add mfcv12 variant
> media: s5p-mfc: Rename IS_MFCV10 macro
> media: s5p-mfc: Add initial support for MFCv12
> Documention: v4l: Documentation for VP9 CIDs.
> media: v4l2: Add v4l2 control IDs for VP9 encoder.
> media: s5p-mfc: Add support for VP9 encoder.
> media: s5p-mfc: Add YV12 and I420 multiplanar format support
> media: s5p-mfc: Add support for rate controls in MFCv12
> media: s5p-mfc: Add support for UHD encoding.
> media: s5p-mfc: Add support for DMABUF for encoder
> media: s5p-mfc: Set context for valid case before calling try_run
> media: s5p-mfc: Load firmware for each run in MFCv12.
> media: s5p-mfc: DPB Count Independent of VIDIOC_REQBUF
> arm64: dts: fsd: Add MFC related DT enteries
>
> .../devicetree/bindings/media/s5p-mfc.txt | 77 +---
> .../bindings/media/samsung,s5p-mfc.yaml | 110 +++++
> .../media/v4l/ext-ctrls-codec.rst | 167 +++++++
> arch/arm64/boot/dts/tesla/fsd-evb.dts | 4 +
> arch/arm64/boot/dts/tesla/fsd.dtsi | 22 +
> .../platform/samsung/s5p-mfc/regs-mfc-v12.h | 60 +++
> .../platform/samsung/s5p-mfc/regs-mfc-v7.h | 1 +
> .../platform/samsung/s5p-mfc/regs-mfc-v8.h | 3 +
> .../media/platform/samsung/s5p-mfc/s5p_mfc.c | 36 +-
> .../platform/samsung/s5p-mfc/s5p_mfc_cmd_v6.c | 3 +
> .../platform/samsung/s5p-mfc/s5p_mfc_common.h | 54 ++-
> .../platform/samsung/s5p-mfc/s5p_mfc_ctrl.c | 9 +-
> .../platform/samsung/s5p-mfc/s5p_mfc_dec.c | 51 ++-
> .../platform/samsung/s5p-mfc/s5p_mfc_enc.c | 410 +++++++++++++++--
> .../platform/samsung/s5p-mfc/s5p_mfc_opr.h | 16 +-
> .../platform/samsung/s5p-mfc/s5p_mfc_opr_v5.c | 12 +-
> .../platform/samsung/s5p-mfc/s5p_mfc_opr_v6.c | 433
> ++++++++++++++++--
> .../platform/samsung/s5p-mfc/s5p_mfc_opr_v6.h | 7 +-
> drivers/media/v4l2-core/v4l2-ctrls-defs.c | 44 ++
> include/uapi/linux/v4l2-controls.h | 33 ++
> 20 files changed, 1349 insertions(+), 203 deletions(-) create mode 100644
> Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml
> create mode 100644 drivers/media/platform/samsung/s5p-mfc/regs-mfc-
> v12.h
>
> --
> 2.17.1
[-- Attachment #2: v4l2-compliance-mfcv12.txt --]
[-- Type: text/plain, Size: 11022 bytes --]
# v4l2-compliance -d /dev/video1
v4l2-compliance 1.22.1, 64 bits, 64-bit time_t
Compliance test for s5p-mfc device /dev/video1:
Dr[ 95.014797] vidioc_g_parm:2576: Setting FPS is only possible for the output queue
[ 95.022670] s5p-mfc 12880000.mfc: Encoding not initialised
[ 95.022728] s5p-mfc 12880000.mfc: Encoding not initialised
[ 95.022812] vidioc_g_parm:2576: Setting FPS is only possible for the output queue
[ 95.022871] vidioc_try_fmt:1607: failed to try output format
[ 95.047169] s5p_mfc_queue_setup:2690: invalid state: 0
[ 95.047181] vidioc_reqbufs:1725: error in vb2_reqbufs() for E(D)
iver Info:
Driver name : s5p-mfc
Card type : s5p-mfc-enc
Bus info : platform:12880000.mfc
Driver version : 5.19.0
Capabilities : 0x84204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Detected Stateful Encoder
Required ioctls:
test VIDIOC_QUERYCAP: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/video1 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
fail: v4l2-compliance.cpp(736): !ok
test for unlimited opens: FAIL
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
fail: v4l2-test-controls.cpp(473): g_ctrl returned an error (22)
test VIDIOC_G/S_CTRL: FAIL
fail: v4l2-test-controls.cpp(704): g_ext_ctrls returned an error (22)
test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL
fail: v4l2-test-controls.cpp(872): subscribe event for control 'User Controls' failed
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 128 Private Controls: 11
Format ioctls:
fail: v4l2-test-formats.cpp(282): node->codec_mask & STATEFUL_ENCODER
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: FAIL
fail: v4l2-test-formats.cpp(1310): is_stateful_enc && !out->capability
test VIDIOC_G/S_PARM: FAIL
test VIDIOC_G_FBUF: OK (Not Supported)
fail: v4l2-test-formats.cpp(474): !pix_mp.width || !pix_mp.height
test VIDIOC_G_FMT: FAIL
fail: v4l2-test-formats.cpp(474): !pix_mp.width || !pix_mp.height
test VIDIOC_TRY_FMT: FAIL
warn: v4l2-test-formats.cpp(1147): S_FMT cannot handle an invalid pixelformat.
warn: v4l2-test-formats.cpp(1148): This may or may not be a problem. For more information see:
warn: v4l2-test-formats.cpp(1149): http://www.mail-archive.com/linux-media@vger.kernel.org/msg56550.html
fail: v4l2-test-formats.cpp(478): pixelformat 34363248 (H264) for buftype 9 not reported by ENUM_FMT
test VIDIOC_S_FMT: FAIL
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
fail: v4l2-test-codecs.cpp(35): node->function != MEDIA_ENT_F_PROC_VIDEO_ENCODER
test VIDIOC_(TRY_)ENCODER_CMD: FAIL
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Suppor[ 95.403655] vidioc_g_parm:2576: Setting FPS is only possible for the output queue
ted)
Buffer ioctls:
fail: v4l2-test-buffers.cpp(607): q.reqbufs(node, 1)
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
fail: v4l2-test-buffers.cpp(783): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing or malfunctioning.
fail: v4l2-test-buffers.cpp(784): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing, probably due to earlier failing format tests.
test VIDIOC_EXPBUF: OK (Not Supported)
test Requests: OK (Not Supported)
Total for s5p-mfc device /dev/video1: 45, Succeeded: 34, Failed: 11, Warnings: 3
#
# v4l2-compliance -d /dev/video0
v4l2-compliance 1.22.1, 64 bits, 64-bit time_t
Compliance test for s5p-mfc device /dev/video0:
Drive[ 198.767611] vidioc_g_selection:816: Can not get compose information
[ 198.768087] vidioc_g_selection:816: Can not get compose information
[ 198.768175] vidioc_g_fmt:397: Format could not be read
[ 198.768179] vidioc_g_selection:816: Can not get compose information
[ 198.768182] vidioc_g_selection:816: Can not get compose information
[ 198.768448] s5p-mfc 12880000.mfc: Decoding not initialised
[ 198.768469] s5p-mfc 12880000.mfc: Decoding not initialised
[ 198.768610] vidioc_g_fmt:397: Format could not be read
[ 198.768640] vidioc_g_selection:816: Can not get compose information
[ 198.768643] vidioc_g_selection:816: Can not get compose information
[ 198.768646] vidioc_g_selection:816: Can not get compose information
[ 198.768648] vidioc_g_selection:816: Can not get compose information
[ 198.768650] vidioc_g_selection:816: Can not get compose information
[ 198.768658] vidioc_g_selection:816: Can not get compose information
[ 198.768731] vidioc_g_selection:816: Can not get compose information
[ 198.768760] vidioc_g_selection:816: Can not get compose information
[ 198.768837] vidioc_g_selection:816: Can not get compose information
[ 198.768861] vidioc_g_selection:816: Can not get compose information
[ 198.768866] vidioc_try_fmt:429: Unsupported format for destination.
[ 198.768894] vidioc_g_selection:816: Can not get compose information
[ 198.768915] vidioc_g_selection:816: Can not get compose information
[ 198.768917] vidioc_try_fmt:429: Unsupported format for destination.
[ 198.768939] vidioc_g_selection:816: Can not get compose information
r Info:
Driver name : s5p-mfc
Card type : s5p-mfc-dec
Bus info : platform:12880000.mfc
Driver version : 5.19.0
Capabilities : 0x84204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Detected Stateful Decoder
Required ioctls:
test VIDIOC_QUERYCAP: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/video0 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
fail: v4l2-compliance.cpp(736): !ok
test for unlimited opens: FAIL
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
fail: v4l2-test-controls.cpp(473): g_ctrl returned an error (22)
test VIDIOC_G/S_CTRL: FAIL
fail: v4l2-test-controls.cpp(704): g_ext_ctrls returned an error (22)
test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL
fail: v4l2-test-controls.cpp(872): subscribe event for control 'User Controls' failed
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 7 Private Controls: 2
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
fail: v4l2-test-formats.cpp(620): Video Capture Multiplanar cap set, but no Video Capture Multiplanar formats defined
test VIDIOC_G_FMT: FAIL
test VIDIOC_TRY_FMT: OK (Not Supported)
test VIDIOC_S_FMT: OK (Not Supported)
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
fail: v4l2-test-codecs.cpp(104): node->function != MEDIA_ENT_F_PROC_VIDEO_DECODER
test VIDIOC_(TRY_)DECODER_CMD: FAIL
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK (Not Supported)
test Requests: OK (Not Supported)
Total for s5p-mfc device /dev/video0: 45, Succeeded: 39, Failed: 6, Warnings: 0
#
prev parent reply other threads:[~2022-09-07 7:51 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20220907063309epcas5p1793555c0747fd7a11997e97649924552@epcas5p1.samsung.com>
2022-09-07 6:47 ` [Patch v2 00/15] Add MFC v12 support Smitha T Murthy
[not found] ` <CGME20220907063313epcas5p114f793010fd0f2797e93bd83ed18a1d7@epcas5p1.samsung.com>
2022-09-07 6:47 ` [Patch v2 01/15] dt-bindings: media: s5p-mfc: Add new DT schema for MFC Smitha T Murthy
2022-09-07 11:22 ` Krzysztof Kozlowski
2022-09-08 12:56 ` Aakarsh Jain
2022-09-08 15:11 ` Krzysztof Kozlowski
2022-09-14 12:48 ` Aakarsh Jain
2022-09-07 15:13 ` Rob Herring
2022-09-08 11:54 ` Aakarsh Jain
[not found] ` <CGME20220907063318epcas5p2a395fc5da7576c3a53b6a55e3cc87911@epcas5p2.samsung.com>
2022-09-07 6:47 ` [Patch v2 02/15] dt-bindings: media: s5p-mfc: Add mfcv12 variant Smitha T Murthy
2022-09-07 11:24 ` Krzysztof Kozlowski
2022-09-08 6:53 ` Smitha T Murthy
[not found] ` <CGME20220907063323epcas5p37b1a06b0c0ba5ac685284bf68b40a205@epcas5p3.samsung.com>
2022-09-07 6:47 ` [Patch v2 03/15] media: s5p-mfc: Rename IS_MFCV10 macro Smitha T Murthy
[not found] ` <CGME20220907063328epcas5p12c01eb755e3ddfa4fdaee8e4c3bc9527@epcas5p1.samsung.com>
2022-09-07 6:47 ` [Patch v2 04/15] media: s5p-mfc: Add initial support for MFCv12 Smitha T Murthy
2022-09-12 22:26 ` Andi Shyti
[not found] ` <CGME20220907063332epcas5p2d3c4258885b17c6765658702d833a782@epcas5p2.samsung.com>
2022-09-07 6:47 ` [Patch v2 05/15] Documention: v4l: Documentation for VP9 CIDs Smitha T Murthy
[not found] ` <CGME20220907063336epcas5p3511dcc3393c7bd5fe44f37889dd754df@epcas5p3.samsung.com>
2022-09-07 6:47 ` [Patch v2 06/15] media: v4l2: Add v4l2 control IDs for VP9 encoder Smitha T Murthy
[not found] ` <CGME20220907063340epcas5p2d7eb2452918dfc593c47f48d05cfb83b@epcas5p2.samsung.com>
2022-09-07 6:47 ` [Patch v2 07/15] media: s5p-mfc: Add support " Smitha T Murthy
[not found] ` <CGME20220907063344epcas5p1bb88aa1275e41bf266ac82e53a88ba2e@epcas5p1.samsung.com>
2022-09-07 6:47 ` [Patch v2 08/15] media: s5p-mfc: Add YV12 and I420 multiplanar format support Smitha T Murthy
[not found] ` <CGME20220907063348epcas5p15d482a6f03f21489aedde74f93c64ae4@epcas5p1.samsung.com>
2022-09-07 6:47 ` [Patch v2 09/15] media: s5p-mfc: Add support for rate controls in MFCv12 Smitha T Murthy
[not found] ` <CGME20220907063352epcas5p2deb747c1a6a293fcc7275aed05010552@epcas5p2.samsung.com>
2022-09-07 6:47 ` [Patch v2 10/15] media: s5p-mfc: Add support for UHD encoding Smitha T Murthy
[not found] ` <CGME20220907063355epcas5p4738968135cdc376beb4a8c621131e2f1@epcas5p4.samsung.com>
2022-09-07 6:47 ` [Patch v2 11/15] media: s5p-mfc: Add support for DMABUF for encoder Smitha T Murthy
[not found] ` <CGME20220907063404epcas5p2e300613155b910ab587d015e77a2aa0e@epcas5p2.samsung.com>
2022-09-07 6:47 ` [Patch v2 13/15] media: s5p-mfc: Load firmware for each run in MFCv12 Smitha T Murthy
[not found] ` <CGME20220907063408epcas5p4285be9e4db0a64b396da8d66fb5ab2ad@epcas5p4.samsung.com>
2022-09-07 6:47 ` [Patch v2 14/15] media: s5p-mfc: DPB Count Independent of VIDIOC_REQBUF Smitha T Murthy
[not found] ` <CGME20220907063413epcas5p3df6d22933ba2884730c52b6a3af2cb09@epcas5p3.samsung.com>
2022-09-07 6:47 ` [Patch v2 15/15] arm64: dts: fsd: Add MFC related DT enteries Smitha T Murthy
2022-09-07 11:25 ` Krzysztof Kozlowski
2022-09-07 12:16 ` Smitha T Murthy
2022-09-07 7:46 ` Smitha T Murthy [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='04ba01d8c28d$fcda1e80$f68e5b80$@samsung.com' \
--to=smitha.t@samsung.com \
--cc=aakarsh.jain@samsung.com \
--cc=alim.akhtar@samsung.com \
--cc=andi@etezian.org \
--cc=andrzej.hajda@intel.com \
--cc=aswani.reddy@samsung.com \
--cc=benjamin.gaignard@collabora.com \
--cc=david.plowman@raspberrypi.com \
--cc=devicetree@vger.kernel.org \
--cc=dillon.minfei@gmail.com \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=hverkuil-cisco@xs4all.nl \
--cc=jernej.skrabec@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-fsd@tesla.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mark.rutland@arm.com \
--cc=mchehab@kernel.org \
--cc=pankaj.dubey@samsung.com \
--cc=robh+dt@kernel.org \
--cc=stanimir.varbanov@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).