Re: [PATCH v4 02/14] dt-bindings: display/msm/gmu: Add GMU wrapper

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 14/03/2023 16:28, Konrad Dybcio wrote:
> The "GMU Wrapper" is Qualcomm's name for "let's treat the GPU blocks
> we'd normally assign to the GMU as if they were a part of the GMU, even
> though they are not". It's a (good) software representation of the GMU_CX
> and GMU_GX register spaces within the GPUSS that helps us programatically
> treat these de-facto GMU-less parts in a way that's very similar to their
> GMU-equipped cousins, massively saving up on code duplication.
> 
> The "wrapper" register space was specifically designed to mimic the layout
> of a real GMU, though it rather obviously does not have the M3 core et al.
> 
> To sum it all up, the GMU wrapper is essentially a register space within
> the GPU, which Linux sees as a dumbed-down regular GMU: there's no clocks,
> interrupts, multiple reg spaces, iommus and OPP. Document it.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>  .../devicetree/bindings/display/msm/gmu.yaml       | 49 ++++++++++++++++------
>  1 file changed, 37 insertions(+), 12 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml
> index ab14e81cb050..021373e686e1 100644
> --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml
> @@ -19,16 +19,18 @@ description: |
>  
>  properties:
>    compatible:
> -    items:
> -      - pattern: '^qcom,adreno-gmu-6[0-9][0-9]\.[0-9]$'
> -      - const: qcom,adreno-gmu
> +    oneOf:
> +      - items:
> +          - pattern: '^qcom,adreno-gmu-6[0-9][0-9]\.[0-9]$'
> +          - const: qcom,adreno-gmu
> +      - const: qcom,adreno-gmu-wrapper
>  
>    reg:
> -    minItems: 3
> +    minItems: 1
>      maxItems: 4
>  
>    reg-names:
> -    minItems: 3
> +    minItems: 1
>      maxItems: 4
>  
>    clocks:
> @@ -44,7 +46,6 @@ properties:
>        - description: GMU HFI interrupt
>        - description: GMU interrupt
>  
> -
>    interrupt-names:
>      items:
>        - const: hfi
> @@ -72,14 +73,8 @@ required:
>    - compatible
>    - reg
>    - reg-names
> -  - clocks
> -  - clock-names
> -  - interrupts
> -  - interrupt-names
>    - power-domains
>    - power-domain-names
> -  - iommus
> -  - operating-points-v2
>  
>  additionalProperties: false
>  
> @@ -216,6 +211,27 @@ allOf:
>              - const: cxo
>              - const: axi
>              - const: memnoc

Blank line (you added such between ifs in previous patch)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof