Re: [PATCH 2/2] doc: dt-binding: cdns-salvo-phy: add property usb2-disconnect-threshold-microvolt

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 05/05/2023 20:52, Frank Li wrote:
> Add usb2-disconnect-threshold-microvolt property to address fake USB
> disconnection issue during enumeration or suspend state for difference
> platform.

Use subject prefixes matching the subsystem (which you can get for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching). Two prefixes got wrong... It's not doc but it
is dt-bindings.

> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml b/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml
> index 3a07285b5470..3c7f5b3f9211 100644
> --- a/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml
> @@ -31,6 +31,13 @@ properties:
>    "#phy-cells":
>      const: 0
>  
> +  usb2-disconnect-threshold-microvolt:
> +    description: The microvolt threshold value utilized for detecting
> +      USB disconnection event.
> +    $ref: /schemas/types.yaml#/definitions/uint32

Does not look like you tested the bindings. Please run `make
dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).

Drop ref. Add vendor prefix.

> +    enum: [575, 610, 645]
> +    default: 575
> +
>  required:
>    - compatible
>    - reg

Best regards,
Krzysztof