* [PATCH] arm64: zynqmp: Remove ep108 board
@ 2018-04-11 13:17 Michal Simek
2018-07-17 14:39 ` Michal Simek
0 siblings, 1 reply; 2+ messages in thread
From: Michal Simek @ 2018-04-11 13:17 UTC (permalink / raw)
To: devicetree
Cc: Sören Brinkmann, Naga Sureshkumar Relli, monstr, VNSL Durga,
Masahiro Yamada, Kedareswara rao Appana, linux-kernel,
Anurag Kumar Vulisha, Alistair Francis, Arnd Bergmann,
Will Deacon, Mark Rutland, Rob Herring, Catalin Marinas,
linux-arm-kernel, Javier Martinez Canillas
ZynqMP Emulation board is no longer tested and there is no reason to
keep maintaining it.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
arch/arm64/boot/dts/xilinx/Makefile | 1 -
.../boot/dts/xilinx/zynqmp-ep108-clk.dtsi | 137 ----------------
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts | 154 ------------------
3 files changed, 292 deletions(-)
delete mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
delete mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile
index c2a0c00272e2..d452f80e7601 100644
--- a/arch/arm64/boot/dts/xilinx/Makefile
+++ b/arch/arm64/boot/dts/xilinx/Makefile
@@ -1,5 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-ep108.dtb
dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1232-revA.dtb
dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1254-revA.dtb
dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1275-revA.dtb
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
deleted file mode 100644
index 9f5eedbc2139..000000000000
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * clock specification for Xilinx ZynqMP ep108 development board
- *
- * (C) Copyright 2015, Xilinx, Inc.
- *
- * Michal Simek <michal.simek@xilinx.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-/ {
- misc_clk: misc_clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <25000000>;
- };
-
- i2c_clk: i2c_clk {
- compatible = "fixed-clock";
- #clock-cells = <0x0>;
- clock-frequency = <111111111>;
- };
-
- sata_clk: sata_clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <75000000>;
- };
-
- clk100: clk100 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <100000000>;
- };
-
- clk600: clk600 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <600000000>;
- };
-};
-
-&can0 {
- clocks = <&misc_clk &misc_clk>;
-};
-
-&can1 {
- clocks = <&misc_clk &misc_clk>;
-};
-
-&fpd_dma_chan1 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan2 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan3 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan4 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan5 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan6 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan7 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan8 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&gem0 {
- clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
-};
-
-&gpio {
- clocks = <&misc_clk>;
-};
-
-&i2c0 {
- clocks = <&i2c_clk>;
-};
-
-&i2c1 {
- clocks = <&i2c_clk>;
-};
-
-&sata {
- clocks = <&sata_clk>;
-};
-
-&sdhci0 {
- clocks = <&misc_clk>, <&misc_clk>;
-};
-
-&sdhci1 {
- clocks = <&misc_clk>, <&misc_clk>;
-};
-
-&spi0 {
- clocks = <&misc_clk &misc_clk>;
-};
-
-&spi1 {
- clocks = <&misc_clk &misc_clk>;
-};
-
-&uart0 {
- clocks = <&misc_clk &misc_clk>;
-};
-
-&usb0 {
- clocks = <&misc_clk>, <&misc_clk>;
-};
-
-&usb1 {
- clocks = <&misc_clk>, <&misc_clk>;
-};
-
-&watchdog0 {
- clocks= <&misc_clk>;
-};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
deleted file mode 100644
index 4b0684911626..000000000000
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
+++ /dev/null
@@ -1,154 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * dts file for Xilinx ZynqMP ep108 development board
- *
- * (C) Copyright 2014 - 2015, Xilinx, Inc.
- *
- * Michal Simek <michal.simek@xilinx.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include "zynqmp.dtsi"
-#include "zynqmp-ep108-clk.dtsi"
-
-/ {
- model = "ZynqMP EP108";
-
- aliases {
- mmc0 = &sdhci0;
- mmc1 = &sdhci1;
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x40000000>;
- };
-};
-
-&can0 {
- status = "okay";
-};
-
-&can1 {
- status = "okay";
-};
-
-&gem0 {
- status = "okay";
- phy-handle = <&phy0>;
- phy-mode = "rgmii-id";
- phy0: phy@0 {
- reg = <0>;
- max-speed = <100>;
- };
-};
-
-&gpio {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
- clock-frequency = <400000>;
- eeprom@54 {
- compatible = "atmel,24c64";
- reg = <0x54>;
- };
-};
-
-&i2c1 {
- status = "okay";
- clock-frequency = <400000>;
- eeprom@55 {
- compatible = "atmel,24c64";
- reg = <0x55>;
- };
-};
-
-&sata {
- status = "okay";
- ceva,broken-gen2;
- /* SATA Phy OOB timing settings */
- ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
- ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
- ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
- ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
- ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
- ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
- ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
- ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
-};
-
-&sdhci0 {
- status = "okay";
- bus-width = <8>;
-};
-
-&sdhci1 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
- num-cs = <1>;
- spi0_flash0: spi0_flash0@0 {
- compatible = "m25p80";
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <50000000>;
- reg = <0>;
-
- spi0_flash0@0 {
- label = "spi0_flash0";
- reg = <0x0 0x100000>;
- };
- };
-};
-
-&spi1 {
- status = "okay";
- num-cs = <1>;
- spi1_flash0: spi1_flash0@0 {
- compatible = "m25p80";
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <50000000>;
- reg = <0>;
-
- spi1_flash0@0 {
- label = "spi1_flash0";
- reg = <0x0 0x100000>;
- };
- };
-};
-
-&uart0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- dr_mode = "peripheral";
- maximum-speed = "high-speed";
-};
-
-&usb1 {
- status = "okay";
- dr_mode = "host";
- maximum-speed = "high-speed";
-};
-
-&watchdog0 {
- status = "okay";
-};
--
2.17.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] arm64: zynqmp: Remove ep108 board
2018-04-11 13:17 [PATCH] arm64: zynqmp: Remove ep108 board Michal Simek
@ 2018-07-17 14:39 ` Michal Simek
0 siblings, 0 replies; 2+ messages in thread
From: Michal Simek @ 2018-07-17 14:39 UTC (permalink / raw)
To: Michal Simek, devicetree
Cc: Sören Brinkmann, Naga Sureshkumar Relli, VNSL Durga,
Masahiro Yamada, Kedareswara rao Appana, linux-kernel,
Anurag Kumar Vulisha, Alistair Francis, Arnd Bergmann,
Will Deacon, Mark Rutland, Rob Herring, Catalin Marinas,
linux-arm-kernel, Javier Martinez Canillas
[-- Attachment #1.1: Type: text/plain, Size: 7791 bytes --]
On 11.4.2018 15:17, Michal Simek wrote:
> ZynqMP Emulation board is no longer tested and there is no reason to
> keep maintaining it.
>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
>
> arch/arm64/boot/dts/xilinx/Makefile | 1 -
> .../boot/dts/xilinx/zynqmp-ep108-clk.dtsi | 137 ----------------
> arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts | 154 ------------------
> 3 files changed, 292 deletions(-)
> delete mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
> delete mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
>
> diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile
> index c2a0c00272e2..d452f80e7601 100644
> --- a/arch/arm64/boot/dts/xilinx/Makefile
> +++ b/arch/arm64/boot/dts/xilinx/Makefile
> @@ -1,5 +1,4 @@
> # SPDX-License-Identifier: GPL-2.0
> -dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-ep108.dtb
> dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1232-revA.dtb
> dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1254-revA.dtb
> dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1275-revA.dtb
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
> deleted file mode 100644
> index 9f5eedbc2139..000000000000
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
> +++ /dev/null
> @@ -1,137 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * clock specification for Xilinx ZynqMP ep108 development board
> - *
> - * (C) Copyright 2015, Xilinx, Inc.
> - *
> - * Michal Simek <michal.simek@xilinx.com>
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - */
> -
> -/ {
> - misc_clk: misc_clk {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - clock-frequency = <25000000>;
> - };
> -
> - i2c_clk: i2c_clk {
> - compatible = "fixed-clock";
> - #clock-cells = <0x0>;
> - clock-frequency = <111111111>;
> - };
> -
> - sata_clk: sata_clk {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - clock-frequency = <75000000>;
> - };
> -
> - clk100: clk100 {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - clock-frequency = <100000000>;
> - };
> -
> - clk600: clk600 {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - clock-frequency = <600000000>;
> - };
> -};
> -
> -&can0 {
> - clocks = <&misc_clk &misc_clk>;
> -};
> -
> -&can1 {
> - clocks = <&misc_clk &misc_clk>;
> -};
> -
> -&fpd_dma_chan1 {
> - clocks = <&clk600>, <&clk100>;
> -};
> -
> -&fpd_dma_chan2 {
> - clocks = <&clk600>, <&clk100>;
> -};
> -
> -&fpd_dma_chan3 {
> - clocks = <&clk600>, <&clk100>;
> -};
> -
> -&fpd_dma_chan4 {
> - clocks = <&clk600>, <&clk100>;
> -};
> -
> -&fpd_dma_chan5 {
> - clocks = <&clk600>, <&clk100>;
> -};
> -
> -&fpd_dma_chan6 {
> - clocks = <&clk600>, <&clk100>;
> -};
> -
> -&fpd_dma_chan7 {
> - clocks = <&clk600>, <&clk100>;
> -};
> -
> -&fpd_dma_chan8 {
> - clocks = <&clk600>, <&clk100>;
> -};
> -
> -&gem0 {
> - clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
> -};
> -
> -&gpio {
> - clocks = <&misc_clk>;
> -};
> -
> -&i2c0 {
> - clocks = <&i2c_clk>;
> -};
> -
> -&i2c1 {
> - clocks = <&i2c_clk>;
> -};
> -
> -&sata {
> - clocks = <&sata_clk>;
> -};
> -
> -&sdhci0 {
> - clocks = <&misc_clk>, <&misc_clk>;
> -};
> -
> -&sdhci1 {
> - clocks = <&misc_clk>, <&misc_clk>;
> -};
> -
> -&spi0 {
> - clocks = <&misc_clk &misc_clk>;
> -};
> -
> -&spi1 {
> - clocks = <&misc_clk &misc_clk>;
> -};
> -
> -&uart0 {
> - clocks = <&misc_clk &misc_clk>;
> -};
> -
> -&usb0 {
> - clocks = <&misc_clk>, <&misc_clk>;
> -};
> -
> -&usb1 {
> - clocks = <&misc_clk>, <&misc_clk>;
> -};
> -
> -&watchdog0 {
> - clocks= <&misc_clk>;
> -};
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
> deleted file mode 100644
> index 4b0684911626..000000000000
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
> +++ /dev/null
> @@ -1,154 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * dts file for Xilinx ZynqMP ep108 development board
> - *
> - * (C) Copyright 2014 - 2015, Xilinx, Inc.
> - *
> - * Michal Simek <michal.simek@xilinx.com>
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - */
> -
> -/dts-v1/;
> -
> -#include "zynqmp.dtsi"
> -#include "zynqmp-ep108-clk.dtsi"
> -
> -/ {
> - model = "ZynqMP EP108";
> -
> - aliases {
> - mmc0 = &sdhci0;
> - mmc1 = &sdhci1;
> - serial0 = &uart0;
> - };
> -
> - chosen {
> - stdout-path = "serial0:115200n8";
> - };
> -
> - memory@0 {
> - device_type = "memory";
> - reg = <0x0 0x0 0x0 0x40000000>;
> - };
> -};
> -
> -&can0 {
> - status = "okay";
> -};
> -
> -&can1 {
> - status = "okay";
> -};
> -
> -&gem0 {
> - status = "okay";
> - phy-handle = <&phy0>;
> - phy-mode = "rgmii-id";
> - phy0: phy@0 {
> - reg = <0>;
> - max-speed = <100>;
> - };
> -};
> -
> -&gpio {
> - status = "okay";
> -};
> -
> -&i2c0 {
> - status = "okay";
> - clock-frequency = <400000>;
> - eeprom@54 {
> - compatible = "atmel,24c64";
> - reg = <0x54>;
> - };
> -};
> -
> -&i2c1 {
> - status = "okay";
> - clock-frequency = <400000>;
> - eeprom@55 {
> - compatible = "atmel,24c64";
> - reg = <0x55>;
> - };
> -};
> -
> -&sata {
> - status = "okay";
> - ceva,broken-gen2;
> - /* SATA Phy OOB timing settings */
> - ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
> - ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
> - ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
> - ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
> - ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
> - ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
> - ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
> - ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
> -};
> -
> -&sdhci0 {
> - status = "okay";
> - bus-width = <8>;
> -};
> -
> -&sdhci1 {
> - status = "okay";
> -};
> -
> -&spi0 {
> - status = "okay";
> - num-cs = <1>;
> - spi0_flash0: spi0_flash0@0 {
> - compatible = "m25p80";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - spi-max-frequency = <50000000>;
> - reg = <0>;
> -
> - spi0_flash0@0 {
> - label = "spi0_flash0";
> - reg = <0x0 0x100000>;
> - };
> - };
> -};
> -
> -&spi1 {
> - status = "okay";
> - num-cs = <1>;
> - spi1_flash0: spi1_flash0@0 {
> - compatible = "m25p80";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - spi-max-frequency = <50000000>;
> - reg = <0>;
> -
> - spi1_flash0@0 {
> - label = "spi1_flash0";
> - reg = <0x0 0x100000>;
> - };
> - };
> -};
> -
> -&uart0 {
> - status = "okay";
> -};
> -
> -&usb0 {
> - status = "okay";
> - dr_mode = "peripheral";
> - maximum-speed = "high-speed";
> -};
> -
> -&usb1 {
> - status = "okay";
> - dr_mode = "host";
> - maximum-speed = "high-speed";
> -};
> -
> -&watchdog0 {
> - status = "okay";
> -};
>
Applied.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP SoCs
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-07-17 14:39 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-04-11 13:17 [PATCH] arm64: zynqmp: Remove ep108 board Michal Simek
2018-07-17 14:39 ` Michal Simek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).