devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Taniya Das <tdas@codeaurora.org>
To: Rob Herring <robh@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	David Brown <david.brown@linaro.org>,
	Rajendra Nayak <rnayak@codeaurora.org>,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
	Andy Gross <agross@kernel.org>,
	devicetree@vger.kernel.org
Subject: Re: [PATCH v2 2/4] dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7180
Date: Wed, 10 Jun 2020 22:39:56 +0530	[thread overview]
Message-ID: <05e62adc-9dce-721c-55dc-a4554ece92e2@codeaurora.org> (raw)
In-Reply-To: <20200528202512.GA608913@bogus>

Thanks for your review.

On 5/29/2020 1:55 AM, Rob Herring wrote:
> On Sun, May 17, 2020 at 02:52:22PM +0530, Taniya Das wrote:
>> The LPASS(Low Power Audio Subsystem) clock provider have a bunch of generic
>> properties that are needed in a device tree. Also add clock ids for GCC
>> LPASS and LPASS Core clock IDs for LPASS client to request for the clocks.
>>
>> Signed-off-by: Taniya Das <tdas@codeaurora.org>
>> ---
>>   .../bindings/clock/qcom,sc7180-lpasscorecc.yaml    | 101 +++++++++++++++++++++
>>   include/dt-bindings/clock/qcom,gcc-sc7180.h        |   1 +
>>   .../dt-bindings/clock/qcom,lpasscorecc-sc7180.h    |  29 ++++++
>>   3 files changed, 131 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml
>>   create mode 100644 include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h
>>
>> diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml
>> new file mode 100644
>> index 0000000..c025a0ae
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml
>> @@ -0,0 +1,101 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/clock/qcom,sc7180-lpasscorecc.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm LPASS Core Clock Controller Binding for SC7180
>> +
>> +maintainers:
>> +  - Taniya Das <tdas@codeaurora.org>
>> +
>> +description: |
>> +  Qualcomm LPASS core clock control module which supports the clocks and
>> +  power domains on SC7180.
>> +
>> +  See also:
>> +  - dt-bindings/clock/qcom,lpasscorecc-sc7180.h
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - qcom,sc7180-lpasshm
>> +      - qcom,sc7180-lpasscorecc
>> +
>> +  clocks:
>> +    items:
>> +      - description: gcc_lpass_sway clock from GCC
>> +
>> +  clock-names:
>> +    items:
>> +      - const: gcc_lpass_sway
>> +
>> +  power-domains:
>> +    items:
>> +      - description: LPASS CORE HM GSDCR
> 
> For single entry, 'maxItems: 1' is enough.

Will take of it in the next patch.

>> +
>> +  '#clock-cells':
>> +    const: 1
>> +
>> +  '#power-domain-cells':
>> +    const: 1
>> +
>> +  reg:
>> +    minItems: 1
>> +    maxItems: 2
>> +    items:
>> +      - description: lpass audio cc register
>> +      - description: lpass core cc register
> 
> audio then core
> 
>> +
>> +  reg-names:
>> +    items:
>> +      - const: lpass_core_cc
>> +      - const: lpass_audio_cc
> 
> core then audio?
> 

My bad, will take care of it.

> 2 reg-names required, but 1 reg allowed?
> 

Update to use maxItems: 2 in the next patch.

>> +
>> +if:
>> +  properties:
>> +    compatible:
>> +      contains:
>> +        const: qcom,sc7180-lpasshm
>> +then:
>> +  properties:
>> +    reg:
>> +      items:
>> +        - description: lpass hm core register
> 
> reg-names allowed in this case?
> 
> Ideally, this would have just 'maxItems: 1' to just disallow the 2nd
> entry above.
> 

Yes, I would take care of this too.

>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - clocks
>> +  - clock-names
>> +  - '#clock-cells'
>> +  - '#power-domain-cells'
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
>> +    #include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
>> +    clock-controller@63000000 {
>> +      compatible = "qcom,sc7180-lpasshm";
>> +        reg = <0 0x63000000 0 0x28>;
>> +        clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>;
>> +        clock-names = "gcc_lpass_sway";
>> +        #clock-cells = <1>;
>> +        #power-domain-cells = <1>;
>> +    };
>> +
>> +  - |
>> +    clock-controller@62d00000 {
>> +        compatible = "qcom,sc7180-lpasscorecc";
>> +        reg = <0 0x62d00000 0 0x50000>,
>> +            <0 0x62780000 0 0x30000>;
>> +        reg-names = "lpass_core_cc", "lpass_audio_cc";
>> +        clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>;
>> +        clock-names = "gcc_lpass_sway";
>> +        power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
>> +        #clock-cells = <1>;
>> +        #power-domain-cells = <1>;
>> +    };
>> +...
>> diff --git a/include/dt-bindings/clock/qcom,gcc-sc7180.h b/include/dt-bindings/clock/qcom,gcc-sc7180.h
>> index 1258fd0..439476c 100644
>> --- a/include/dt-bindings/clock/qcom,gcc-sc7180.h
>> +++ b/include/dt-bindings/clock/qcom,gcc-sc7180.h
>> @@ -137,6 +137,7 @@
>>   #define GCC_MSS_NAV_AXI_CLK					127
>>   #define GCC_MSS_Q6_MEMNOC_AXI_CLK				128
>>   #define GCC_MSS_SNOC_AXI_CLK					129
>> +#define GCC_LPASS_CFG_NOC_SWAY_CLK				130
>>
>>   /* GCC resets */
>>   #define GCC_QUSB2PHY_PRIM_BCR					0
>> diff --git a/include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h b/include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h
>> new file mode 100644
>> index 0000000..a55d01d
>> --- /dev/null
>> +++ b/include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h
>> @@ -0,0 +1,29 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
>> + */
>> +
>> +#ifndef _DT_BINDINGS_CLK_QCOM_LPASS_CORE_CC_SC7180_H
>> +#define _DT_BINDINGS_CLK_QCOM_LPASS_CORE_CC_SC7180_H
>> +
>> +/* LPASS_CORE_CC clocks */
>> +#define LPASS_LPAAUDIO_DIG_PLL				0
>> +#define LPASS_LPAAUDIO_DIG_PLL_OUT_ODD			1
>> +#define CORE_CLK_SRC					2
>> +#define EXT_MCLK0_CLK_SRC				3
>> +#define LPAIF_PRI_CLK_SRC				4
>> +#define LPAIF_SEC_CLK_SRC				5
>> +#define LPASS_AUDIO_CORE_CORE_CLK			6
>> +#define LPASS_AUDIO_CORE_EXT_MCLK0_CLK			7
>> +#define LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK		8
>> +#define LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK		9
>> +#define LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK		10
>> +
>> +/* LPASS Core power domains */
>> +#define LPASS_CORE_HM_GDSCR				0
>> +
>> +/* LPASS Audio power domains */
>> +#define LPASS_AUDIO_HM_GDSCR				0
>> +#define LPASS_PDC_HM_GDSCR				1
>> +
>> +#endif
>> --
>> Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
>> of the Code Aurora Forum, hosted by the  Linux Foundation.
>>

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.

--

  reply	other threads:[~2020-06-10 17:10 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-17  9:22 [PATCH v2 0/4] clk: qcom: Support for Low Power Audio Clocks on SC7180 Taniya Das
2020-05-17  9:22 ` [PATCH v2 1/4] clk: qcom: gdsc: Add support to enable retention of GSDCR Taniya Das
2020-05-17  9:22 ` [PATCH v2 2/4] dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7180 Taniya Das
2020-05-27  3:11   ` Stephen Boyd
2020-06-10 17:07     ` Taniya Das
2020-05-28 20:25   ` Rob Herring
2020-06-10 17:09     ` Taniya Das [this message]
2020-05-17  9:22 ` [PATCH v2 3/4] clk: qcom: gcc: Add support for GCC LPASS clock for SC7180 Taniya Das
2020-05-17  9:22 ` [PATCH v2 4/4] clk: qcom: lpass: Add support for LPASS clock controller " Taniya Das
2020-05-27  3:10   ` Stephen Boyd
2020-06-10 17:11     ` Taniya Das
2020-06-11  1:06       ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=05e62adc-9dce-721c-55dc-a4554ece92e2@codeaurora.org \
    --to=tdas@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=rnayak@codeaurora.org \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).