Re: [PATCH v5 9/9] dt-bindings: serial: stm32: Use 'type: object' instead of false for 'additionalProperties'

[Valentin CARON - foss <valentin.caron@foss.st.com>]

Hi Dillon,

It's okay for me.

Regards,

Valentin

On 3/25/21 7:19 AM, dillon.minfei@gmail.com wrote:
> From: dillon min <dillon.minfei@gmail.com>
>
> To use additional properties 'bluetooth' on serial, need replace false with
> 'type: object' for 'additionalProperties' to make it as a node, else will
> run into dtbs_check warnings.
>
> 'arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: serial@40004800:
> 'bluetooth' does not match any of the regexes: 'pinctrl-[0-9]+'
>
> Fixes: af1c2d81695b ("dt-bindings: serial: Convert STM32 UART to json-schema")
> Reported-by: kernel test robot <lkp@intel.com>
> Tested-by: Valentin Caron <valentin.caron@foss.st.com>
> Signed-off-by: dillon min <dillon.minfei@gmail.com>
> ---
>
> v5: accroding to rob's suggestion, replace false with 'type: object'
>      of 'additionalProperties'.
>
>   Documentation/devicetree/bindings/serial/st,stm32-uart.yaml | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
> index 8631678283f9..865be05083c3 100644
> --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
> +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
> @@ -80,7 +80,8 @@ required:
>     - interrupts
>     - clocks
>   
> -additionalProperties: false
> +additionalProperties:
> +  type: object
>   
>   examples:
>     - |