[PATCH v2 0/1] Fixup documentation for dsi-phy-28nm

[PATCH v2 0/1] Fixup documentation for dsi-phy-28nm

[Bryan O'Donoghue]

This is the one remaining patch I had from a previous series for
mdss-dsi-ctrl and the dsi-phy. The mdss-dsi-ctrl set became a bigger so I
split out the 28nm phy fixes.

I'm resubmitting with Dmitry's RB as a standalone.

Old: https://lore.kernel.org/all/20220630120845.3356144-1-bryan.odonoghue@linaro.org/

Bryan O'Donoghue (1):
  dt-bindings: msm: dsi-phy-28nm: Add missing
    qcom,dsi-phy-regulator-ldo-mode

 .../devicetree/bindings/display/msm/dsi-phy-28nm.yaml         | 4 ++++
 1 file changed, 4 insertions(+)

-- 
2.34.1

[PATCH v2 1/1] dt-bindings: msm: dsi-phy-28nm: Add missing qcom,dsi-phy-regulator-ldo-mode

[Bryan O'Donoghue]

Add in missing qcom,dsi-phy-regulator-ldo-mode to the 28nm DSI PHY.
When converting from .txt to .yaml we missed this one.

Fixes: 4dbe55c97741 ("dt-bindings: msm: dsi: add yaml schemas for DSI bindings")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 .../devicetree/bindings/display/msm/dsi-phy-28nm.yaml         | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
index 3d8540a06fe22..95076c90ea171 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
@@ -25,6 +25,10 @@ properties:
       - description: dsi phy register set
       - description: dsi phy regulator register set
 
+  qcom,dsi-phy-regulator-ldo-mode:
+    type: boolean
+    description: Indicates if the LDO mode PHY regulator is wanted.
+
   reg-names:
     items:
       - const: dsi_pll
-- 
2.34.1

Re: [PATCH v2 1/1] dt-bindings: msm: dsi-phy-28nm: Add missing qcom,dsi-phy-regulator-ldo-mode

[Krzysztof Kozlowski]

On 28/12/2022 14:11, Bryan O'Donoghue wrote:
> Add in missing qcom,dsi-phy-regulator-ldo-mode to the 28nm DSI PHY.
> When converting from .txt to .yaml we missed this one.
> 
> Fixes: 4dbe55c97741 ("dt-bindings: msm: dsi: add yaml schemas for DSI bindings")
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
>  .../devicetree/bindings/display/msm/dsi-phy-28nm.yaml         | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
> index 3d8540a06fe22..95076c90ea171 100644
> --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
> @@ -25,6 +25,10 @@ properties:
>        - description: dsi phy register set
>        - description: dsi phy regulator register set
>  
> +  qcom,dsi-phy-regulator-ldo-mode:
> +    type: boolean
> +    description: Indicates if the LDO mode PHY regulator is wanted.
> +
Do not add it between reg/reg-names (or any other grouped properties).
Should go after reg-names.

Krzysztof