From: Kukjin Kim <kgene@kernel.org>
To: 'Vikas Sajjan' <vikas.sajjan@linaro.org>,
'Jingoo Han' <jg1.han@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org,
'Tomasz Figa' <t.figa@samsung.com>,
'devicetree' <devicetree@vger.kernel.org>,
'InKi Dae' <inki.dae@samsung.com>,
'Ajay kumar' <ajaynumb@gmail.com>,
'Patch Tracking' <patches@linaro.org>,
linaro-kernel@lists.linaro.org
Subject: RE: [PATCH v2 5/7] ARM: dts: Update DP controller DT Node for Exynos5 based SoCs
Date: Thu, 12 Sep 2013 19:36:56 +0900 [thread overview]
Message-ID: <06f501ceafa4$00ed4490$02c7cdb0$@org> (raw)
In-Reply-To: <CAD025yQ62VW4ou67GEi5=WwQy+j5r80haBp--ioPiw9U0o-e=Q@mail.gmail.com>
Vikas Sajjan wrote:
>
> Hi Mr. Jingoo Han,
>
> On 26 August 2013 08:27, Jingoo Han <jg1.han@samsung.com> wrote:
> > On Tuesday, July 30, 2013 8:20 PM, Vikas Sajjan wrote:
> >>
> >> Moves the properties of DP controller to exynos5.dtsi which are common
> >> across exynos5 SoCs like Exynos5250 and Exynos5420.
> >>
> >> The PHY DP Node is based on Jingoo Han's <jg1.han@samsung.com> patch at
> >> https://patchwork.linuxtv.org/patch/19189/
> >>
> >> Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org>
> >> ---
> >> arch/arm/boot/dts/exynos5.dtsi | 11 +++++++++++
> >> arch/arm/boot/dts/exynos5250-arndale.dts | 3 ++-
> >> arch/arm/boot/dts/exynos5250-smdk5250.dts | 3 ++-
> >> arch/arm/boot/dts/exynos5250.dtsi | 21 +++++++++------------
> >> 4 files changed, 24 insertions(+), 14 deletions(-)
> >>
> >
> > [....]
> >
> >> diff --git a/arch/arm/boot/dts/exynos5250.dtsi
> b/arch/arm/boot/dts/exynos5250.dtsi
> >> index 238bdb2..1c017dc 100644
> >> --- a/arch/arm/boot/dts/exynos5250.dtsi
> >> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> >> @@ -614,20 +614,17 @@
> >> interrupts = <0 94 0>;
> >> };
> >>
> >> - dp-controller {
> >> - compatible = "samsung,exynos5-dp";
> >> - reg = <0x145b0000 0x1000>;
> >> - interrupts = <10 3>;
> >> - interrupt-parent = <&combiner>;
> >> + dp_phy: video-phy@10040720 {
> >> + compatible = "samsung,exynos5250-dp-video-phy";
> >> + reg = <0x10040720 4>;
> >> + #phy-cells = <0>;
> >> + };
> >
> > Oops!!!
> >
> > This patch should be reverted.
> > Or, fix patch should be re-sent.
> > 'dp phy' driver is not yet merged to mainline kernel.
> >
>
> As you suggest, since the DP-PHY driver is NOT yet in mainline, we may
> have to keep this patch reverted till your patch series gets merged to
> have DP working on exynos5 .
>
OK, got it. Please send patch fixing this issue for v3.12. Of course, we
need this from v3.13 which will be including the DP-PHY driver.
Thanks,
Kukjin
> >
> >> +
> >> + dp-controller@145b0000 {
> >> clocks = <&clock 342>;
> >> clock-names = "dp";
> >> - #address-cells = <1>;
> >> - #size-cells = <0>;
> >> -
> >> - dptx-phy {
> >> - reg = <0x10040720>;
> >> - samsung,enable-mask = <1>;
> >> - };
> >> + phys = <&dp_phy>;
> >> + phy-names = "dp";
> >> };
> >
> > Thus, 'dptx-phy' node should be used until dp phy driver is merged.
> >
> > Vikas Sajjan,
> > Please test your patch on real boards when you send your patch.
> >
>
> I tested the patch before sending on Exynos5250-SMDK5250 using Kishon
> Vijay Abraham's series at http://lwn.net/Articles/559487/
> which contains DP-PHY driver posted by you
> 1. phy: Add driver for Exynos DP PHY
> 2. video: exynos_dp: remove non-DT support for Exynos Display Port
> 3. video: exynos_dp: Use the generic PHY driver
next prev parent reply other threads:[~2013-09-12 10:36 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1375183178-8201-1-git-send-email-vikas.sajjan@linaro.org>
[not found] ` <1375183178-8201-6-git-send-email-vikas.sajjan@linaro.org>
2013-08-26 2:57 ` [PATCH v2 5/7] ARM: dts: Update DP controller DT Node for Exynos5 based SoCs Jingoo Han
2013-08-26 6:05 ` Vikas Sajjan
2013-09-12 10:36 ` Kukjin Kim [this message]
2013-09-12 10:56 ` Jingoo Han
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='06f501ceafa4$00ed4490$02c7cdb0$@org' \
--to=kgene@kernel.org \
--cc=ajaynumb@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=inki.dae@samsung.com \
--cc=jg1.han@samsung.com \
--cc=linaro-kernel@lists.linaro.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=patches@linaro.org \
--cc=t.figa@samsung.com \
--cc=vikas.sajjan@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).