From: Kukjin Kim <kgene@kernel.org>
To: 'Alim Akhtar' <alim.akhtar@gmail.com>,
'Jaehoon Chung' <jh80.chung@samsung.com>
Cc: devicetree@vger.kernel.org,
'Ulf Hansson' <ulf.hansson@linaro.org>,
linux-samsung-soc@vger.kernel.org,
'Seungwon Jeon' <tgih.jun@samsung.com>,
linux-mmc@vger.kernel.org, 'Chris Ball' <chris@printf.net>,
'Douglas Anderson' <dianders@chromium.org>,
'kgene' <kgene@kernel.org>,
'Alim Akhtar' <alim.akhtar@samsung.com>,
'Abhilash Kesavan' <a.kesavan@samsung.com>,
linux-arm-kernel@lists.infradead.org
Subject: RE: [PATCH V5 2/2] ARM: dts: Add HS400 support for exynos5420 and exynos5800
Date: Tue, 17 Mar 2015 11:12:42 +0900 [thread overview]
Message-ID: <07b501d06057$d9d7bc80$8d873580$@kernel.org> (raw)
In-Reply-To: <CAGOxZ53_TGay2ooTW22ZGPZ+yneqoXH6JEPZ=mMSYr1cpOhXWg@mail.gmail.com>
Alim Akhtar wrote:
>
> Ping?
>
Alim,
Can you please re-send it based on latest my tree?
It would be helpful for me ;)
Thanks,
Kukjin
> On Wed, Feb 25, 2015 at 12:05 PM, Jaehoon Chung <jh80.chung@samsung.com> wrote:
> > Hi, Alim.
> >
> > Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
> >
> > Best Regards,
> > Jaehoon Chung
> >
> > On 01/29/2015 11:41 AM, Alim Akhtar wrote:
> >> From: Seungwon Jeon <tgih.jun@samsung.com>
> >>
> >> HS400 timing values are added for SMDK5420, exynos5420-peach-pit
> >> and exynos5800-peach-pi boards.
> >> This also adds RCLK GPIO line, this gpio should be in pull-down
> >> state.
> >> This also enables HS400 on peach-pi and this updates the clock frequency
> >> to 800MHz to be set as input clock to controller.
> >>
> >> Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
> >> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> >> [Alim: addressed review comments]
> >> ---
> >> arch/arm/boot/dts/exynos5420-peach-pit.dts | 4 +++-
> >> arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 +++++++
> >> arch/arm/boot/dts/exynos5420-smdk5420.dts | 4 +++-
> >> arch/arm/boot/dts/exynos5800-peach-pi.dts | 7 +++++--
> >> 4 files changed, 18 insertions(+), 4 deletions(-)
> >>
> >> diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-
> pit.dts
> >> index 9a050e1..f7a44a4 100644
> >> --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
> >> +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> >> @@ -569,8 +569,10 @@
> >> samsung,dw-mshc-ciu-div = <3>;
> >> samsung,dw-mshc-sdr-timing = <0 4>;
> >> samsung,dw-mshc-ddr-timing = <0 2>;
> >> + samsung,dw-mshc-hs400-timing = <0 2>;
> >> + samsung,read-strobe-delay = <90>;
> >> pinctrl-names = "default";
> >> - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
> >> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8 &sd0_rclk>;
> >> bus-width = <8>;
> >> };
> >>
> >> diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> >> index ba686e4..8b15316 100644
> >> --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> >> +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> >> @@ -201,6 +201,13 @@
> >> samsung,pin-drv = <3>;
> >> };
> >>
> >> + sd0_rclk: sd0-rclk {
> >> + samsung,pins = "gpc0-7";
> >> + samsung,pin-function = <2>;
> >> + samsung,pin-pud = <1>;
> >> + samsung,pin-drv = <3>;
> >> + };
> >> +
> >> sd1_cmd: sd1-cmd {
> >> samsung,pins = "gpc1-1";
> >> samsung,pin-function = <2>;
> >> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> >> index 8be3d7b..2078a1f 100644
> >> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
> >> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> >> @@ -80,8 +80,10 @@
> >> samsung,dw-mshc-ciu-div = <3>;
> >> samsung,dw-mshc-sdr-timing = <0 4>;
> >> samsung,dw-mshc-ddr-timing = <0 2>;
> >> + samsung,dw-mshc-hs400-timing = <0 2>;
> >> + samsung,read-strobe-delay = <90>;
> >> pinctrl-names = "default";
> >> - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
> >> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8 &sd0_rclk>;
> >> bus-width = <8>;
> >> cap-mmc-highspeed;
> >> };
> >> diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> >> index e8fdda8..96f0d61 100644
> >> --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
> >> +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> >> @@ -550,15 +550,18 @@
> >> num-slots = <1>;
> >> broken-cd;
> >> mmc-hs200-1_8v;
> >> + mmc-hs400-1_8v;
> >> cap-mmc-highspeed;
> >> non-removable;
> >> card-detect-delay = <200>;
> >> - clock-frequency = <400000000>;
> >> + clock-frequency = <800000000>;
> >> samsung,dw-mshc-ciu-div = <3>;
> >> samsung,dw-mshc-sdr-timing = <0 4>;
> >> samsung,dw-mshc-ddr-timing = <0 2>;
> >> + samsung,dw-mshc-hs400-timing = <0 2>;
> >> + samsung,read-strobe-delay = <90>;
> >> pinctrl-names = "default";
> >> - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
> >> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8 &sd0_rclk>;
> >> bus-width = <8>;
> >> };
next prev parent reply other threads:[~2015-03-17 2:12 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-29 2:41 [PATCH v5 0/2] mmc: dw_mmc: exynos: Add HS400 support Alim Akhtar
2015-01-29 2:41 ` [PATCH V5 1/2] mmc: dw_mmc: exynos: Support eMMC's HS400 mode Alim Akhtar
2015-02-25 6:34 ` Jaehoon Chung
2015-02-25 8:12 ` Alim Akhtar
2015-02-25 14:38 ` Rob Herring
2015-02-26 1:22 ` Jaehoon Chung
2015-01-29 2:41 ` [PATCH V5 2/2] ARM: dts: Add HS400 support for exynos5420 and exynos5800 Alim Akhtar
2015-02-25 6:35 ` Jaehoon Chung
2015-03-15 11:28 ` Alim Akhtar
2015-03-17 2:12 ` Kukjin Kim [this message]
2015-03-17 23:26 ` Alim Akhtar
2015-02-06 1:18 ` [PATCH v5 0/2] mmc: dw_mmc: exynos: Add HS400 support Jaehoon Chung
[not found] ` <54D41654.8030702-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2015-02-06 5:52 ` Vivek Gautam
[not found] ` <CAFp+6iEGCEiGf5WooHJyh=cnJF_c7j=n_YhHLowfwjpLiXUPiQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-02-06 6:03 ` Jaehoon Chung
2015-02-06 6:07 ` Vivek Gautam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='07b501d06057$d9d7bc80$8d873580$@kernel.org' \
--to=kgene@kernel.org \
--cc=a.kesavan@samsung.com \
--cc=alim.akhtar@gmail.com \
--cc=alim.akhtar@samsung.com \
--cc=chris@printf.net \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=jh80.chung@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=tgih.jun@samsung.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).