[PATCH 1/5] arm: dts: mt7623: add a performance counter unit device node

[PATCH 1/5] arm: dts: mt7623: add a performance counter unit device node

[Ryder Lee]

Add ARM PMU device node to enable hardware perf events.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
 arch/arm/boot/dts/mt7623.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 1cdc346..8c43bd0 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -121,6 +121,15 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	system_clk: dummy13m {
 		compatible = "fixed-clock";
 		clock-frequency = <13000000>;
-- 
1.9.1

[PATCH 2/5] arm: dts: mt7623: update subsystem clock controller device nodes

[Ryder Lee]

Update MT7623 subsystem clock controllers, inlcuding mmsys, imgsys,
vdecsys, g3dsys and bdpsys.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
 arch/arm/boot/dts/mt7623.dtsi | 41 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 8c43bd0..b7ccf8b 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -692,6 +692,39 @@
 		status = "disabled";
 	};
 
+	g3dsys: syscon@13000000 {
+		compatible = "mediatek,mt7623-g3dsys",
+			     "mediatek,mt2701-g3dsys",
+			     "syscon";
+		reg = <0 0x13000000 0 0x200>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	mmsys: syscon@14000000 {
+		compatible = "mediatek,mt7623-mmsys",
+			     "mediatek,mt2701-mmsys",
+			     "syscon";
+		reg = <0 0x14000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	imgsys: syscon@15000000 {
+		compatible = "mediatek,mt7623-imgsys",
+			     "mediatek,mt2701-imgsys",
+			     "syscon";
+		reg = <0 0x15000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	vdecsys: syscon@16000000 {
+		compatible = "mediatek,mt7623-vdecsys",
+			     "mediatek,mt2701-vdecsys",
+			     "syscon";
+		reg = <0 0x16000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
 	hifsys: syscon@1a000000 {
 		compatible = "mediatek,mt7623-hifsys",
 			     "mediatek,mt2701-hifsys",
@@ -946,6 +979,14 @@
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
 		status = "disabled";
 	};
+
+	bdpsys: syscon@1c000000 {
+		compatible = "mediatek,mt7623-bdpsys",
+			     "mediatek,mt2701-bdpsys",
+			     "syscon";
+		reg = <0 0x1c000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
 };
 
 &pio {
-- 
1.9.1

Re: [PATCH 2/5] arm: dts: mt7623: update subsystem clock controller device nodes

[Matthias Brugger]

On 05/09/2018 12:22, Ryder Lee wrote:
> Update MT7623 subsystem clock controllers, inlcuding mmsys, imgsys,
> vdecsys, g3dsys and bdpsys.
> 
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>

Applied to v4.19-next/dts32

> ---
>  arch/arm/boot/dts/mt7623.dtsi | 41 +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> index 8c43bd0..b7ccf8b 100644
> --- a/arch/arm/boot/dts/mt7623.dtsi
> +++ b/arch/arm/boot/dts/mt7623.dtsi
> @@ -692,6 +692,39 @@
>  		status = "disabled";
>  	};
>  
> +	g3dsys: syscon@13000000 {
> +		compatible = "mediatek,mt7623-g3dsys",
> +			     "mediatek,mt2701-g3dsys",
> +			     "syscon";
> +		reg = <0 0x13000000 0 0x200>;
> +		#clock-cells = <1>;
> +		#reset-cells = <1>;
> +	};
> +
> +	mmsys: syscon@14000000 {
> +		compatible = "mediatek,mt7623-mmsys",
> +			     "mediatek,mt2701-mmsys",
> +			     "syscon";
> +		reg = <0 0x14000000 0 0x1000>;
> +		#clock-cells = <1>;
> +	};
> +
> +	imgsys: syscon@15000000 {
> +		compatible = "mediatek,mt7623-imgsys",
> +			     "mediatek,mt2701-imgsys",
> +			     "syscon";
> +		reg = <0 0x15000000 0 0x1000>;
> +		#clock-cells = <1>;
> +	};
> +
> +	vdecsys: syscon@16000000 {
> +		compatible = "mediatek,mt7623-vdecsys",
> +			     "mediatek,mt2701-vdecsys",
> +			     "syscon";
> +		reg = <0 0x16000000 0 0x1000>;
> +		#clock-cells = <1>;
> +	};
> +
>  	hifsys: syscon@1a000000 {
>  		compatible = "mediatek,mt7623-hifsys",
>  			     "mediatek,mt2701-hifsys",
> @@ -946,6 +979,14 @@
>  		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
>  		status = "disabled";
>  	};
> +
> +	bdpsys: syscon@1c000000 {
> +		compatible = "mediatek,mt7623-bdpsys",
> +			     "mediatek,mt2701-bdpsys",
> +			     "syscon";
> +		reg = <0 0x1c000000 0 0x1000>;
> +		#clock-cells = <1>;
> +	};
>  };
>  
>  &pio {
> 

[PATCH 3/5] arm: dts: mt7623: add iommu/smi device nodes

[Ryder Lee]

Add iommu/smi device nodes for MT7623.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
 arch/arm/boot/dts/mt7623.dtsi | 59 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index b7ccf8b..a46987b 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/power/mt2701-power.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/phy/phy.h>
+#include <dt-bindings/memory/mt2701-larb-port.h>
 #include <dt-bindings/reset/mt2701-resets.h>
 #include <dt-bindings/thermal/thermal.h>
 
@@ -286,6 +287,17 @@
 		clock-names = "system-clk", "rtc-clk";
 	};
 
+	smi_common: smi@1000c000 {
+		compatible = "mediatek,mt7623-smi-common",
+			     "mediatek,mt2701-smi-common";
+		reg = <0 0x1000c000 0 0x1000>;
+		clocks = <&infracfg CLK_INFRA_SMI>,
+			 <&mmsys CLK_MM_SMI_COMMON>,
+			 <&infracfg CLK_INFRA_SMI>;
+		clock-names = "apb", "smi", "async";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
 	pwrap: pwrap@1000d000 {
 		compatible = "mediatek,mt7623-pwrap",
 			     "mediatek,mt2701-pwrap";
@@ -317,6 +329,17 @@
 		reg = <0 0x10200100 0 0x1c>;
 	};
 
+	iommu: mmsys_iommu@10205000 {
+		compatible = "mediatek,mt7623-m4u",
+			     "mediatek,mt2701-m4u";
+		reg = <0 0x10205000 0 0x1000>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_M4U>;
+		clock-names = "bclk";
+		mediatek,larbs = <&larb0 &larb1 &larb2>;
+		#iommu-cells = <1>;
+	};
+
 	efuse: efuse@10206000 {
 		compatible = "mediatek,mt7623-efuse",
 			     "mediatek,mt8173-efuse";
@@ -709,6 +732,18 @@
 		#clock-cells = <1>;
 	};
 
+	larb0: larb@14010000 {
+		compatible = "mediatek,mt7623-smi-larb",
+			     "mediatek,mt2701-smi-larb";
+		reg = <0 0x14010000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <0>;
+		clocks = <&mmsys CLK_MM_SMI_LARB0>,
+			 <&mmsys CLK_MM_SMI_LARB0>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
 	imgsys: syscon@15000000 {
 		compatible = "mediatek,mt7623-imgsys",
 			     "mediatek,mt2701-imgsys",
@@ -717,6 +752,18 @@
 		#clock-cells = <1>;
 	};
 
+	larb2: larb@15001000 {
+		compatible = "mediatek,mt7623-smi-larb",
+			     "mediatek,mt2701-smi-larb";
+		reg = <0 0x15001000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <2>;
+		clocks = <&imgsys CLK_IMG_SMI_COMM>,
+			 <&imgsys CLK_IMG_SMI_COMM>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+	};
+
 	vdecsys: syscon@16000000 {
 		compatible = "mediatek,mt7623-vdecsys",
 			     "mediatek,mt2701-vdecsys",
@@ -725,6 +772,18 @@
 		#clock-cells = <1>;
 	};
 
+	larb1: larb@16010000 {
+		compatible = "mediatek,mt7623-smi-larb",
+			     "mediatek,mt2701-smi-larb";
+		reg = <0 0x16010000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <1>;
+		clocks = <&vdecsys CLK_VDEC_CKGEN>,
+			 <&vdecsys CLK_VDEC_LARB>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
+	};
+
 	hifsys: syscon@1a000000 {
 		compatible = "mediatek,mt7623-hifsys",
 			     "mediatek,mt2701-hifsys",
-- 
1.9.1

Re: [PATCH 3/5] arm: dts: mt7623: add iommu/smi device nodes

[Matthias Brugger]

On 05/09/2018 12:22, Ryder Lee wrote:
> Add iommu/smi device nodes for MT7623.
> 
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>

Applied to v4.19-next/dts32

> ---
>  arch/arm/boot/dts/mt7623.dtsi | 59 +++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 59 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> index b7ccf8b..a46987b 100644
> --- a/arch/arm/boot/dts/mt7623.dtsi
> +++ b/arch/arm/boot/dts/mt7623.dtsi
> @@ -13,6 +13,7 @@
>  #include <dt-bindings/power/mt2701-power.h>
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/phy/phy.h>
> +#include <dt-bindings/memory/mt2701-larb-port.h>
>  #include <dt-bindings/reset/mt2701-resets.h>
>  #include <dt-bindings/thermal/thermal.h>
>  
> @@ -286,6 +287,17 @@
>  		clock-names = "system-clk", "rtc-clk";
>  	};
>  
> +	smi_common: smi@1000c000 {
> +		compatible = "mediatek,mt7623-smi-common",
> +			     "mediatek,mt2701-smi-common";
> +		reg = <0 0x1000c000 0 0x1000>;
> +		clocks = <&infracfg CLK_INFRA_SMI>,
> +			 <&mmsys CLK_MM_SMI_COMMON>,
> +			 <&infracfg CLK_INFRA_SMI>;
> +		clock-names = "apb", "smi", "async";
> +		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
> +	};
> +
>  	pwrap: pwrap@1000d000 {
>  		compatible = "mediatek,mt7623-pwrap",
>  			     "mediatek,mt2701-pwrap";
> @@ -317,6 +329,17 @@
>  		reg = <0 0x10200100 0 0x1c>;
>  	};
>  
> +	iommu: mmsys_iommu@10205000 {
> +		compatible = "mediatek,mt7623-m4u",
> +			     "mediatek,mt2701-m4u";
> +		reg = <0 0x10205000 0 0x1000>;
> +		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
> +		clocks = <&infracfg CLK_INFRA_M4U>;
> +		clock-names = "bclk";
> +		mediatek,larbs = <&larb0 &larb1 &larb2>;
> +		#iommu-cells = <1>;
> +	};
> +
>  	efuse: efuse@10206000 {
>  		compatible = "mediatek,mt7623-efuse",
>  			     "mediatek,mt8173-efuse";
> @@ -709,6 +732,18 @@
>  		#clock-cells = <1>;
>  	};
>  
> +	larb0: larb@14010000 {
> +		compatible = "mediatek,mt7623-smi-larb",
> +			     "mediatek,mt2701-smi-larb";
> +		reg = <0 0x14010000 0 0x1000>;
> +		mediatek,smi = <&smi_common>;
> +		mediatek,larb-id = <0>;
> +		clocks = <&mmsys CLK_MM_SMI_LARB0>,
> +			 <&mmsys CLK_MM_SMI_LARB0>;
> +		clock-names = "apb", "smi";
> +		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
> +	};
> +
>  	imgsys: syscon@15000000 {
>  		compatible = "mediatek,mt7623-imgsys",
>  			     "mediatek,mt2701-imgsys",
> @@ -717,6 +752,18 @@
>  		#clock-cells = <1>;
>  	};
>  
> +	larb2: larb@15001000 {
> +		compatible = "mediatek,mt7623-smi-larb",
> +			     "mediatek,mt2701-smi-larb";
> +		reg = <0 0x15001000 0 0x1000>;
> +		mediatek,smi = <&smi_common>;
> +		mediatek,larb-id = <2>;
> +		clocks = <&imgsys CLK_IMG_SMI_COMM>,
> +			 <&imgsys CLK_IMG_SMI_COMM>;
> +		clock-names = "apb", "smi";
> +		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
> +	};
> +
>  	vdecsys: syscon@16000000 {
>  		compatible = "mediatek,mt7623-vdecsys",
>  			     "mediatek,mt2701-vdecsys",
> @@ -725,6 +772,18 @@
>  		#clock-cells = <1>;
>  	};
>  
> +	larb1: larb@16010000 {
> +		compatible = "mediatek,mt7623-smi-larb",
> +			     "mediatek,mt2701-smi-larb";
> +		reg = <0 0x16010000 0 0x1000>;
> +		mediatek,smi = <&smi_common>;
> +		mediatek,larb-id = <1>;
> +		clocks = <&vdecsys CLK_VDEC_CKGEN>,
> +			 <&vdecsys CLK_VDEC_LARB>;
> +		clock-names = "apb", "smi";
> +		power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
> +	};
> +
>  	hifsys: syscon@1a000000 {
>  		compatible = "mediatek,mt7623-hifsys",
>  			     "mediatek,mt2701-hifsys",
> 

[PATCH 4/5] arm: dts: mt7623: add jpeg decoder device node

[Ryder Lee]

Add a jpeg decoder device node for MT7623.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
 arch/arm/boot/dts/mt7623.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index a46987b..d01bdee 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -764,6 +764,21 @@
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
 	};
 
+	jpegdec: jpegdec@15004000 {
+		compatible = "mediatek,mt7623-jpgdec",
+			     "mediatek,mt2701-jpgdec";
+		reg = <0 0x15004000 0 0x1000>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+		clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
+			  <&imgsys CLK_IMG_JPGDEC>;
+		clock-names = "jpgdec-smi",
+			      "jpgdec";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+		mediatek,larb = <&larb2>;
+		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+	};
+
 	vdecsys: syscon@16000000 {
 		compatible = "mediatek,mt7623-vdecsys",
 			     "mediatek,mt2701-vdecsys",
-- 
1.9.1

Re: [PATCH 4/5] arm: dts: mt7623: add jpeg decoder device node

[Matthias Brugger]

On 05/09/2018 12:22, Ryder Lee wrote:
> Add a jpeg decoder device node for MT7623.
> 
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>

Applied to v4.19-next/dts32

> ---
>  arch/arm/boot/dts/mt7623.dtsi | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> index a46987b..d01bdee 100644
> --- a/arch/arm/boot/dts/mt7623.dtsi
> +++ b/arch/arm/boot/dts/mt7623.dtsi
> @@ -764,6 +764,21 @@
>  		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
>  	};
>  
> +	jpegdec: jpegdec@15004000 {
> +		compatible = "mediatek,mt7623-jpgdec",
> +			     "mediatek,mt2701-jpgdec";
> +		reg = <0 0x15004000 0 0x1000>;
> +		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
> +		clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
> +			  <&imgsys CLK_IMG_JPGDEC>;
> +		clock-names = "jpgdec-smi",
> +			      "jpgdec";
> +		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
> +		mediatek,larb = <&larb2>;
> +		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
> +			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
> +	};
> +
>  	vdecsys: syscon@16000000 {
>  		compatible = "mediatek,mt7623-vdecsys",
>  			     "mediatek,mt2701-vdecsys",
> 

[PATCH 5/5] arm: dts: mt7623: add display subsystem related device nodes

[Ryder Lee]

Add display subsystem related device nodes for MT7623.

Cc: CK Hu <ck.hu@mediatek.com>
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
This patch depends on the series: https://lkml.org/lkml/2018/9/5/223

Hi Matthias,

I know you're working on broken MMSYS - just want to ask whether it's possible
to let the patch to go to your tree (if others are okay with it), and we could 
send another fixup one for MT7623 MMSYS later?
---
 arch/arm/boot/dts/mt7623.dtsi                 | 177 ++++++++++++++++++++++++++
 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts |  83 ++++++++++++
 arch/arm/boot/dts/mt7623n-rfb-emmc.dts        |  83 ++++++++++++
 3 files changed, 343 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index d01bdee..c6e1e5b 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -23,6 +23,11 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		rdma0 = &rdma0;
+		rdma1 = &rdma1;
+	};
+
 	cpu_opp_table: opp-table {
 		compatible = "operating-points-v2";
 		opp-shared;
@@ -311,6 +316,25 @@
 		clock-names = "spi", "wrap";
 	};
 
+	mipi_tx0: mipi-dphy@10010000 {
+		compatible = "mediatek,mt7623-mipi-tx",
+			     "mediatek,mt2701-mipi-tx";
+		reg = <0 0x10010000 0 0x90>;
+		clocks = <&clk26m>;
+		clock-output-names = "mipi_tx0_pll";
+		#clock-cells = <0>;
+		#phy-cells = <0>;
+	};
+
+	cec: cec@10012000 {
+		compatible = "mediatek,mt7623-cec",
+			     "mediatek,mt8173-cec";
+		reg = <0 0x10012000 0 0xbc>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_CEC>;
+		status = "disabled";
+	};
+
 	cir: cir@10013000 {
 		compatible = "mediatek,mt7623-cir";
 		reg = <0 0x10013000 0 0x1000>;
@@ -359,6 +383,18 @@
 		#clock-cells = <1>;
 	};
 
+	hdmi_phy: phy@10209100 {
+		compatible = "mediatek,mt7623-hdmi-phy",
+			     "mediatek,mt2701-hdmi-phy";
+		reg = <0 0x10209100 0 0x24>;
+		clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>;
+		clock-names = "pll_ref";
+		clock-output-names = "hdmitx_dig_cts";
+		#clock-cells = <0>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+
 	rng: rng@1020f000 {
 		compatible = "mediatek,mt7623-rng";
 		reg = <0 0x1020f000 0 0x1000>;
@@ -505,6 +541,16 @@
 		status = "disabled";
 	};
 
+	hdmiddc0: i2c@11013000 {
+		compatible = "mediatek,mt7623-hdmi-ddc",
+			     "mediatek,mt8173-hdmi-ddc";
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0 0x11013000 0 0x1C>;
+		clocks = <&pericfg CLK_PERI_I2C3>;
+		clock-names = "ddc-i2c";
+		status = "disabled";
+	};
+
 	thermal: thermal@1100b000 {
 		#thermal-sensor-cells = <1>;
 		compatible = "mediatek,mt7623-thermal",
@@ -732,6 +778,84 @@
 		#clock-cells = <1>;
 	};
 
+	display_components: dispsys@14000000 {
+		compatible = "mediatek,mt7623-mmsys",
+			     "mediatek,mt2701-mmsys";
+		reg = <0 0x14000000 0 0x1000>;
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
+	ovl@14007000 {
+		compatible = "mediatek,mt7623-disp-ovl",
+			     "mediatek,mt2701-disp-ovl";
+		reg = <0 0x14007000 0 0x1000>;
+		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_OVL>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
+		mediatek,larb = <&larb0>;
+	};
+
+	rdma0: rdma@14008000 {
+		compatible = "mediatek,mt7623-disp-rdma",
+			     "mediatek,mt2701-disp-rdma";
+		reg = <0 0x14008000 0 0x1000>;
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_RDMA>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
+		mediatek,larb = <&larb0>;
+	};
+
+	wdma@14009000 {
+		compatible = "mediatek,mt7623-disp-wdma",
+			     "mediatek,mt2701-disp-wdma";
+		reg = <0 0x14009000 0 0x1000>;
+		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_WDMA>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
+		mediatek,larb = <&larb0>;
+	};
+
+	bls: bls@1400a000 {
+		compatible = "mediatek,mt7623-disp-pwm",
+			     "mediatek,mt2701-disp-pwm";
+		reg = <0 0x1400a000 0 0x1000>;
+		#pwm-cells = <2>;
+		clocks = <&mmsys CLK_MM_MDP_BLS_26M>,
+			 <&mmsys CLK_MM_DISP_BLS>;
+		clock-names = "main", "mm";
+		status = "disabled";
+	};
+
+	color@1400b000 {
+		compatible = "mediatek,mt7623-disp-color",
+			     "mediatek,mt2701-disp-color";
+		reg = <0 0x1400b000 0 0x1000>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_COLOR>;
+	};
+
+	dsi: dsi@1400c000 {
+		compatible = "mediatek,mt7623-dsi",
+			     "mediatek,mt2701-dsi";
+		reg = <0 0x1400c000 0 0x1000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DSI_ENGINE>,
+			 <&mmsys CLK_MM_DSI_DIG>,
+			 <&mipi_tx0>;
+		clock-names = "engine", "digital", "hs";
+		phys = <&mipi_tx0>;
+		phy-names = "dphy";
+		status = "disabled";
+	};
+
+	mutex: mutex@1400e000 {
+		compatible = "mediatek,mt7623-disp-mutex",
+			     "mediatek,mt2701-disp-mutex";
+		reg = <0 0x1400e000 0 0x1000>;
+		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_MUTEX_32K>;
+	};
+
 	larb0: larb@14010000 {
 		compatible = "mediatek,mt7623-smi-larb",
 			     "mediatek,mt2701-smi-larb";
@@ -744,6 +868,16 @@
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
 	};
 
+	rdma1: rdma@14012000 {
+		compatible = "mediatek,mt7623-disp-rdma",
+			     "mediatek,mt2701-disp-rdma";
+		reg = <0 0x14012000 0 0x1000>;
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
+		mediatek,larb = <&larb0>;
+	};
+
 	imgsys: syscon@15000000 {
 		compatible = "mediatek,mt7623-imgsys",
 			     "mediatek,mt2701-imgsys",
@@ -799,6 +933,34 @@
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
 	};
 
+	dpi0: dpi@14014000 {
+		compatible = "mediatek,mt7623-dpi",
+			     "mediatek,mt2701-dpi";
+		reg = <0 0x14014000 0 0x1000>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DPI1_DIGL>,
+			 <&mmsys CLK_MM_DPI1_ENGINE>,
+			 <&topckgen CLK_TOP_TVDPLL>;
+		clock-names = "pixel", "engine", "pll";
+		status = "disabled";
+	};
+
+	hdmi0: hdmi@14015000 {
+		compatible = "mediatek,mt7623-hdmi",
+			     "mediatek,mt8173-hdmi";
+		reg = <0 0x14015000 0 0x400>;
+		clocks = <&mmsys CLK_MM_HDMI_PIXEL>,
+			 <&mmsys CLK_MM_HDMI_PLL>,
+			 <&mmsys CLK_MM_HDMI_AUDIO>,
+			 <&mmsys CLK_MM_HDMI_SPDIF>;
+		clock-names = "pixel", "pll", "bclk", "spdif";
+		phys = <&hdmi_phy>;
+		phy-names = "hdmi";
+		mediatek,syscon-hdmi = <&mmsys 0x900>;
+		cec = <&cec>;
+		status = "disabled";
+	};
+
 	hifsys: syscon@1a000000 {
 		compatible = "mediatek,mt7623-hifsys",
 			     "mediatek,mt2701-hifsys",
@@ -1071,6 +1233,21 @@
 		};
 	};
 
+	hdmi_pins_a: hdmi-default {
+		pins-hdmi {
+			pinmux = <MT7623_PIN_123_HTPLG_FUNC_HTPLG>;
+			input-enable;
+			bias-pull-down;
+		};
+	};
+
+	hdmi_ddc_pins_a: hdmi_ddc-default {
+		pins-hdmi-ddc {
+			pinmux = <MT7623_PIN_124_GPIO124_FUNC_HDMISCK>,
+				 <MT7623_PIN_125_GPIO125_FUNC_HDMISD>;
+		};
+	};
+
 	i2c0_pins_a: i2c0-default {
 		pins-i2c0 {
 			pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 2b760f9..dbce86b 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -21,6 +21,19 @@
 		stdout-path = "serial2:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "d";
+		ddc-i2c-bus = <&hdmiddc0>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi0_out>;
+			};
+		};
+	};
+
 	cpus {
 		cpu@0 {
 			proc-supply = <&mt6323_vproc_reg>;
@@ -114,10 +127,24 @@
 	};
 };
 
+&bls {
+	status = "okay";
+
+	port {
+		bls_out: endpoint {
+			remote-endpoint = <&dpi0_in>;
+		};
+	};
+};
+
 &btif {
 	status = "okay";
 };
 
+&cec {
+	status = "okay";
+};
+
 &cir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&cir_pins_a>;
@@ -128,6 +155,26 @@
 	status = "okay";
 };
 
+&dpi0 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			dpi0_out: endpoint {
+				remote-endpoint = <&hdmi0_in>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dpi0_in: endpoint {
+				remote-endpoint = <&bls_out>;
+			};
+		};
+	};
+};
+
 &eth {
 	status = "okay";
 
@@ -199,6 +246,42 @@
 	};
 };
 
+&hdmi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_pins_a>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			hdmi0_in: endpoint {
+				remote-endpoint = <&dpi0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmiddc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_ddc_pins_a>;
+	status = "okay";
+};
+
+&hdmi_phy {
+	mediatek,ibias = <0xa>;
+	mediatek,ibias_up = <0x1c>;
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
index b760613..bdf9010 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
@@ -24,6 +24,19 @@
 		stdout-path = "serial2:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "d";
+		ddc-i2c-bus = <&hdmiddc0>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi0_out>;
+			};
+		};
+	};
+
 	cpus {
 		cpu@0 {
 			proc-supply = <&mt6323_vproc_reg>;
@@ -106,10 +119,24 @@
 	};
 };
 
+&bls {
+	status = "okay";
+
+	port {
+		bls_out: endpoint {
+			remote-endpoint = <&dpi0_in>;
+		};
+	};
+};
+
 &btif {
 	status = "okay";
 };
 
+&cec {
+	status = "okay";
+};
+
 &cir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&cir_pins_a>;
@@ -120,6 +147,26 @@
 	status = "okay";
 };
 
+&dpi0 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			dpi0_out: endpoint {
+				remote-endpoint = <&hdmi0_in>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dpi0_in: endpoint {
+				remote-endpoint = <&bls_out>;
+			};
+		};
+	};
+};
+
 &eth {
 	status = "okay";
 
@@ -202,6 +249,42 @@
 	};
 };
 
+&hdmi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_pins_a>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			hdmi0_in: endpoint {
+				remote-endpoint = <&dpi0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmiddc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_ddc_pins_a>;
+	status = "okay";
+};
+
+&hdmi_phy {
+	mediatek,ibias = <0xa>;
+	mediatek,ibias_up = <0x1c>;
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
-- 
1.9.1

Re: [PATCH 1/5] arm: dts: mt7623: add a performance counter unit device node

[Matthias Brugger]

On 05/09/2018 12:22, Ryder Lee wrote:
> Add ARM PMU device node to enable hardware perf events.
> 
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>

Applied to v4.19-next/dts32

> ---
>  arch/arm/boot/dts/mt7623.dtsi | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> index 1cdc346..8c43bd0 100644
> --- a/arch/arm/boot/dts/mt7623.dtsi
> +++ b/arch/arm/boot/dts/mt7623.dtsi
> @@ -121,6 +121,15 @@
>  		};
>  	};
>  
> +	pmu {
> +		compatible = "arm,cortex-a7-pmu";
> +		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
> +	};
> +
>  	system_clk: dummy13m {
>  		compatible = "fixed-clock";
>  		clock-frequency = <13000000>;
>