Re: [PATCH v1 2/6] dt-bindings: reset: mt8188: Add reset control bits for VDOSYS1

["Shawn Sung (宋孝謙)" <Shawn.Sung@mediatek.com>]

Update:

It seems device tree doesn't accept enum.
I'll use #define here.

On Thu, 2023-06-08 at 11:01 +0800, shawn.sung wrote:
> Hi AngeloGioacchino,
> 
> Should I use enum instead of #define if reset ID must starts from 0?
> 
> Thanks,
> Hsiao Chien Sung
> 
> On Wed, 2023-06-07 at 09:51 +0200, AngeloGioacchino Del Regno wrote:
> >  	 
> > External email : Please do not click links or open attachments
> > until
> > you have verified the sender or the content.
> >  
> > Il 07/06/23 08:11, Hsiao Chien Sung ha scritto:
> > > Add reset control bits for  MT8188 VDOSYS1.
> > > 
> > > Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
> > > ---
> > >   include/dt-bindings/reset/mt8188-resets.h | 12 ++++++++++++
> > >   1 file changed, 12 insertions(+)
> > > 
> > > diff --git a/include/dt-bindings/reset/mt8188-resets.h
> > 
> > b/include/dt-bindings/reset/mt8188-resets.h
> > > index 377cdfda82a9..439a9a25ca19 100644
> > > --- a/include/dt-bindings/reset/mt8188-resets.h
> > > +++ b/include/dt-bindings/reset/mt8188-resets.h
> > > @@ -33,4 +33,16 @@
> > > 
> > >   #define MT8188_TOPRGU_SW_RST_NUM               24
> > > 
> > > +/* VDOSYS1 */
> > > +#define MT8188_VDO1_RST_MERGE0_DL_ASYNC         9
> > 
> > Sorry, I've just noticed that there's no index 0 in previous
> > definitions: this
> > is wrong, it must start from 0 and must be sequential.
> > 
> >