Re: [PATCH 3/8] arm64: dts: qcom: sm8550: Add missing properties for cryptobam

[Neil Armstrong <neil.armstrong@linaro.org>]

On 12/02/2025 18:03, Stephan Gerhold wrote:
> num-channels and qcom,num-ees are required for BAM nodes without clock,
> because the driver cannot ensure the hardware is powered on when trying to
> obtain the information from the hardware registers. Specifying the node
> without these properties is unsafe and has caused early boot crashes for
> other SoCs before [1, 2].
> 
> Add the missing information from the hardware registers to ensure the
> driver can probe successfully without causing crashes.
> 
> [1]: https://lore.kernel.org/r/CY01EKQVWE36.B9X5TDXAREPF@fairphone.com/
> [2]: https://lore.kernel.org/r/20230626145959.646747-1-krzysztof.kozlowski@linaro.org/
> 
> Cc: stable@vger.kernel.org
> Fixes: 433477c3bf0b ("arm64: dts: qcom: sm8550: add QCrypto nodes")
> Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8550.dtsi | 2 ++
>   1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> index eac8de4005d82f246bc50f64f09515631d895c99..ac3e00ad417719be2885d76d3197f96137848337 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> @@ -1957,6 +1957,8 @@ cryptobam: dma-controller@1dc4000 {
>   			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
>   			#dma-cells = <1>;
>   			qcom,ee = <0>;
> +			qcom,num-ees = <4>;
> +			num-channels = <20>;
>   			qcom,controlled-remotely;
>   			iommus = <&apps_smmu 0x480 0x0>,
>   				 <&apps_smmu 0x481 0x0>;
> 

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>