Re: [PATCH v3 2/3] arm64: dts: qcom: sm8250-xiaomi-elish-boe: Add mdss and dsi panel

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 23/03/2023 01:59, Jianhua Lu wrote:
> Add nodes for BOE NT36523 panel found in xiaomi-elish. This panel
> is a dual dsi mode panel and the dsi phy type is cphy.
> 
> Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
> ---
> Changes in v2:
>   - Include missing <dt-bindings/phy/phy.h> for phy-type property.
> 
> Changes in v3:
>   - Sort include header.
>   - Move qcom,sync-dual-dsi to the front of qcom,master-dsi 
>   - Add newline before subnode.
> 
>  .../boot/dts/qcom/sm8250-xiaomi-elish-boe.dts |  5 ++
>  .../dts/qcom/sm8250-xiaomi-elish-common.dtsi  | 75 +++++++++++++++++++
>  2 files changed, 80 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts
> index bd9ad109daf9..8b2ae39950ff 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts
> @@ -11,3 +11,8 @@ / {
>  	model = "Xiaomi Mi Pad 5 Pro (BOE)";
>  	compatible = "xiaomi,elish", "qcom,sm8250";
>  };
> +
> +&display_panel {
> +	compatible = "xiaomi,elish-boe-nt36523";

If you add new bindings and new nodes using these - in this case this
panel - please test it. This is why we have DT schema, so you can verify
your DTS. Sending DTS which is entirely different than the bindings you
sent, is adding quite an effort for us later to fix it.

Best regards,
Krzysztof