From: Lucas Stach <l.stach@pengutronix.de>
To: Richard Zhu <hongxing.zhu@nxp.com>,
p.zabel@pengutronix.de, bhelgaas@google.com,
lorenzo.pieralisi@arm.com, robh@kernel.org, shawnguo@kernel.org,
vkoul@kernel.org, alexander.stein@ew.tq-group.com, marex@denx.de,
richard.leitner@linux.dev
Cc: linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@pengutronix.de,
linux-imx@nxp.com
Subject: Re: [PATCH v6 6/7] phy: freescale: imx8m-pcie: Add i.MX8MP PCIe PHY support
Date: Fri, 02 Sep 2022 10:38:19 +0200 [thread overview]
Message-ID: <0aae7d19a079e4631fc7b823d99ffbef30cfb4d2.camel@pengutronix.de> (raw)
In-Reply-To: <1662004960-14071-7-git-send-email-hongxing.zhu@nxp.com>
Am Donnerstag, dem 01.09.2022 um 12:02 +0800 schrieb Richard Zhu:
> Add i.MX8MP PCIe PHY support.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> Tested-by: Marek Vasut <marex@denx.de>
> Tested-by: Richard Leitner <richard.leitner@skidata.com>
> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> ---
> drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 143 ++++++++++++++-------
> 1 file changed, 96 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
> index ad7d2edfc414..c937d429ea8b 100644
> --- a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
> +++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
> @@ -11,6 +11,9 @@
> #include <linux/mfd/syscon.h>
> #include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
> #include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/of_device.h>
> #include <linux/phy/phy.h>
> #include <linux/platform_device.h>
> #include <linux/regmap.h>
> @@ -31,12 +34,10 @@
> #define IMX8MM_PCIE_PHY_CMN_REG065 0x194
> #define ANA_AUX_RX_TERM (BIT(7) | BIT(4))
> #define ANA_AUX_TX_LVL GENMASK(3, 0)
> -#define IMX8MM_PCIE_PHY_CMN_REG75 0x1D4
> -#define PCIE_PHY_CMN_REG75_PLL_DONE 0x3
> +#define IMX8MM_PCIE_PHY_CMN_REG075 0x1D4
> +#define ANA_PLL_DONE 0x3
> #define PCIE_PHY_TRSV_REG5 0x414
> -#define PCIE_PHY_TRSV_REG5_GEN1_DEEMP 0x2D
> #define PCIE_PHY_TRSV_REG6 0x418
> -#define PCIE_PHY_TRSV_REG6_GEN2_DEEMP 0xF
>
> #define IMX8MM_GPR_PCIE_REF_CLK_SEL GENMASK(25, 24)
> #define IMX8MM_GPR_PCIE_REF_CLK_PLL FIELD_PREP(IMX8MM_GPR_PCIE_REF_CLK_SEL, 0x3)
> @@ -47,16 +48,28 @@
> #define IMX8MM_GPR_PCIE_SSC_EN BIT(16)
> #define IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE BIT(9)
>
> +enum imx8_pcie_phy_type {
> + IMX8MM,
> + IMX8MP,
> +};
> +
> +struct imx8_pcie_phy_drvdata {
> + enum imx8_pcie_phy_type variant;
> + char gpr[128];
The static allocation is excessive and wastes a lot of memory. Just
make this a
const char *gpr;
> +};
> +
> struct imx8_pcie_phy {
> void __iomem *base;
> struct clk *clk;
> struct phy *phy;
> struct regmap *iomuxc_gpr;
> struct reset_control *reset;
> + struct reset_control *perst;
> u32 refclk_pad_mode;
> u32 tx_deemph_gen1;
> u32 tx_deemph_gen2;
> bool clkreq_unused;
> + const struct imx8_pcie_phy_drvdata *drvdata;
> };
>
> static int imx8_pcie_phy_init(struct phy *phy)
> @@ -68,31 +81,20 @@ static int imx8_pcie_phy_init(struct phy *phy)
> reset_control_assert(imx8_phy->reset);
>
> pad_mode = imx8_phy->refclk_pad_mode;
> - /* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
> - regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> - IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
> - imx8_phy->clkreq_unused ?
> - 0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
> - regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> - IMX8MM_GPR_PCIE_AUX_EN,
> - IMX8MM_GPR_PCIE_AUX_EN);
> - regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> - IMX8MM_GPR_PCIE_POWER_OFF, 0);
> - regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> - IMX8MM_GPR_PCIE_SSC_EN, 0);
> -
> - regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> - IMX8MM_GPR_PCIE_REF_CLK_SEL,
> - pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
> - IMX8MM_GPR_PCIE_REF_CLK_EXT :
> - IMX8MM_GPR_PCIE_REF_CLK_PLL);
> - usleep_range(100, 200);
> -
> - /* Do the PHY common block reset */
> - regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> - IMX8MM_GPR_PCIE_CMN_RST,
> - IMX8MM_GPR_PCIE_CMN_RST);
> - usleep_range(200, 500);
> + switch (imx8_phy->drvdata->variant) {
> + case IMX8MM:
> + /* Tune PHY de-emphasis setting to pass PCIe compliance. */
> + if (imx8_phy->tx_deemph_gen1)
> + writel(imx8_phy->tx_deemph_gen1,
> + imx8_phy->base + PCIE_PHY_TRSV_REG5);
> + if (imx8_phy->tx_deemph_gen2)
> + writel(imx8_phy->tx_deemph_gen2,
> + imx8_phy->base + PCIE_PHY_TRSV_REG6);
> + break;
> + case IMX8MP:
> + reset_control_assert(imx8_phy->perst);
> + break;
> + }
>
> if (pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ||
> pad_mode == IMX8_PCIE_REFCLK_PAD_UNUSED) {
> @@ -120,20 +122,44 @@ static int imx8_pcie_phy_init(struct phy *phy)
> imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG065);
> }
>
> - /* Tune PHY de-emphasis setting to pass PCIe compliance. */
> - if (imx8_phy->tx_deemph_gen1)
> - writel(imx8_phy->tx_deemph_gen1,
> - imx8_phy->base + PCIE_PHY_TRSV_REG5);
> - if (imx8_phy->tx_deemph_gen2)
> - writel(imx8_phy->tx_deemph_gen2,
> - imx8_phy->base + PCIE_PHY_TRSV_REG6);
> + /* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
> + regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> + IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
> + imx8_phy->clkreq_unused ?
> + 0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
> + regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> + IMX8MM_GPR_PCIE_AUX_EN,
> + IMX8MM_GPR_PCIE_AUX_EN);
> + regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> + IMX8MM_GPR_PCIE_POWER_OFF, 0);
> + regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> + IMX8MM_GPR_PCIE_SSC_EN, 0);
> +
> + regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> + IMX8MM_GPR_PCIE_REF_CLK_SEL,
> + pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
> + IMX8MM_GPR_PCIE_REF_CLK_EXT :
> + IMX8MM_GPR_PCIE_REF_CLK_PLL);
> + usleep_range(100, 200);
> +
> + /* Do the PHY common block reset */
> + regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> + IMX8MM_GPR_PCIE_CMN_RST,
> + IMX8MM_GPR_PCIE_CMN_RST);
>
> - reset_control_deassert(imx8_phy->reset);
> + switch (imx8_phy->drvdata->variant) {
> + case IMX8MP:
> + reset_control_deassert(imx8_phy->perst);
> + fallthrough;
> + case IMX8MM:
> + reset_control_deassert(imx8_phy->reset);
> + usleep_range(200, 500);
> + break;
> + }
>
> /* Polling to check the phy is ready or not. */
> - ret = readl_poll_timeout(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG75,
> - val, val == PCIE_PHY_CMN_REG75_PLL_DONE,
> - 10, 20000);
> + ret = readl_poll_timeout(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG075,
> + val, val == ANA_PLL_DONE, 10, 20000);
> return ret;
> }
>
> @@ -160,6 +186,25 @@ static const struct phy_ops imx8_pcie_phy_ops = {
> .owner = THIS_MODULE,
> };
>
> +static const struct imx8_pcie_phy_drvdata drvdata[] = {
> + [IMX8MM] = {
> + .variant = IMX8MM,
> + .gpr = "fsl,imx8mm-iomuxc-gpr",
> + },
> +
> + [IMX8MP] = {
> + .variant = IMX8MP,
> + .gpr = "fsl,imx8mp-iomuxc-gpr",
> + },
> +};
> +
> +static const struct of_device_id imx8_pcie_phy_of_match[] = {
> + {.compatible = "fsl,imx8mm-pcie-phy", .data = &drvdata[IMX8MM], },
> + {.compatible = "fsl,imx8mp-pcie-phy", .data = &drvdata[IMX8MP], },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
> +
> static int imx8_pcie_phy_probe(struct platform_device *pdev)
> {
> struct phy_provider *phy_provider;
> @@ -172,6 +217,8 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
> if (!imx8_phy)
> return -ENOMEM;
>
> + imx8_phy->drvdata = of_device_get_match_data(dev);
> +
> /* get PHY refclk pad mode */
> of_property_read_u32(np, "fsl,refclk-pad-mode",
> &imx8_phy->refclk_pad_mode);
> @@ -197,7 +244,7 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
>
> /* Grab GPR config register range */
> imx8_phy->iomuxc_gpr =
> - syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
> + syscon_regmap_lookup_by_compatible(imx8_phy->drvdata->gpr);
> if (IS_ERR(imx8_phy->iomuxc_gpr)) {
> dev_err(dev, "unable to find iomuxc registers\n");
> return PTR_ERR(imx8_phy->iomuxc_gpr);
> @@ -208,6 +255,14 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
> dev_err(dev, "Failed to get PCIEPHY reset control\n");
> return PTR_ERR(imx8_phy->reset);
> }
Missing newline.
Regards,
Lucas
> + if (imx8_phy->drvdata->variant == IMX8MP) {
> + imx8_phy->perst =
> + devm_reset_control_get_exclusive(dev, "perst");
> + if (IS_ERR(imx8_phy->perst)) {
> + dev_err(dev, "Failed to get PCIE PHY PERST control\n");
> + return PTR_ERR(imx8_phy->perst);
> + }
> + }
>
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> imx8_phy->base = devm_ioremap_resource(dev, res);
> @@ -225,12 +280,6 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
> return PTR_ERR_OR_ZERO(phy_provider);
> }
>
> -static const struct of_device_id imx8_pcie_phy_of_match[] = {
> - {.compatible = "fsl,imx8mm-pcie-phy",},
> - { },
> -};
> -MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
> -
> static struct platform_driver imx8_pcie_phy_driver = {
> .probe = imx8_pcie_phy_probe,
> .driver = {
next prev parent reply other threads:[~2022-09-02 8:38 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-01 4:02 [PATCH v6 0/7] Add the iMX8MP PCIe support Richard Zhu
2022-09-01 4:02 ` [PATCH v6 1/7] dt-binding: phy: Add iMX8MP PCIe PHY binding Richard Zhu
2022-09-02 8:32 ` Lucas Stach
2022-09-01 4:02 ` [PATCH v6 2/7] arm64: dts: imx8mp: Add iMX8MP PCIe support Richard Zhu
2022-09-02 8:42 ` Lucas Stach
2022-09-01 4:02 ` [PATCH v6 3/7] arm64: dts: imx8mp-evk: Add " Richard Zhu
2022-09-02 8:47 ` Lucas Stach
2022-09-01 4:02 ` [PATCH v6 4/7] reset: imx7: Fix the iMX8MP PCIe PHY PERST support Richard Zhu
2022-09-01 4:02 ` [PATCH v6 5/7] soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets Richard Zhu
2022-09-01 4:02 ` [PATCH v6 6/7] phy: freescale: imx8m-pcie: Add i.MX8MP PCIe PHY support Richard Zhu
2022-09-02 8:38 ` Lucas Stach [this message]
2022-09-02 9:04 ` Hongxing Zhu
2022-09-01 4:02 ` [PATCH v6 7/7] PCI: imx6: Add i.MX8MP PCIe support Richard Zhu
2022-09-02 8:41 ` Lucas Stach
2022-09-02 9:02 ` Hongxing Zhu
2022-09-09 9:39 ` Lorenzo Pieralisi
2022-09-09 9:48 ` Lucas Stach
-- strict thread matches above, loose matches on Subject: below --
2022-09-02 8:55 [PATCH v7 0/7] Add the iMX8MP " Richard Zhu
2022-09-02 8:55 ` [PATCH v6 6/7] phy: freescale: imx8m-pcie: Add i.MX8MP PCIe PHY support Richard Zhu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0aae7d19a079e4631fc7b823d99ffbef30cfb4d2.camel@pengutronix.de \
--to=l.stach@pengutronix.de \
--cc=alexander.stein@ew.tq-group.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=hongxing.zhu@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=marex@denx.de \
--cc=p.zabel@pengutronix.de \
--cc=richard.leitner@linux.dev \
--cc=robh@kernel.org \
--cc=shawnguo@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).