Re: [PATCH v2 1/2] dt-bindings: thermal: convert st,stih407-thermal to DT schema

["Raphaël Gallais-Pou" <rgallaispou@gmail.com>]

Le 04/03/2024 à 19:40, Rob Herring a écrit :
> On Fri, Mar 01, 2024 at 06:47:28PM +0100, Raphael Gallais-Pou wrote:
>> 'st,passive_colling_temp' does not appear in the device-tree, and 'reg'
>> is missing in the device description.
>>
>> Convert st,stih407-thermal binding to DT schema format in order to clean
>> unused 'st,passive_cooling_temp' and add missing 'reg' property.
>>
>> Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>


Hi Rob,

...

>> +  interrupts:
>> +    description:
>> +      For thermal sensors for which no interrupt has been defined, a polling
>> +      delay of 1000ms will be used to read the temperature from device.
> 
> maxItems: 1

Ack.
> 
>> +
>> +  '#thermal-sensor-cells': true
> 
> const: 1
> 
> Also, not in the original binding, so please state in the commit msg
> why you are adding it.

I have mixed feeling regarding the value. Wouldn't this better be 
'const: 0' ?

In the thermal-sensor binding it is specified that it should be 0 for 
single sensor nodes, which is our case.

> 
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - clocks
>> +  - clock-names
>> +
>> +unevaluatedProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +    temperature-sensor@91a0000 {
>> +        compatible = "st,stih407-thermal";
>> +        reg = <0x91a0000 0x28>;
>> +        clock-names = "thermal";
>> +        clocks = <&CLK_SYSIN>;
>> +        interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
>> +        #thermal-sensor-cells = <0>;

If I misunderstand something and the value must be 1 then I will also 
change the value here and in the dt patches of the serie.

Regards,
Raphaël
>> +    };
>> +...