From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>,
LKML <linux-kernel@vger.kernel.org>
Cc: dianders@chromium.org, Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
cros-qcom-dts-watchers@chromium.org, devicetree@vger.kernel.org,
linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH 3/3] arm64: dts: qcom: Add board id for lazor/limozeen
Date: Tue, 8 Aug 2023 18:11:10 +0200 [thread overview]
Message-ID: <0c444142-3623-fa15-4bf6-df57d9804fdf@linaro.org> (raw)
In-Reply-To: <20230802175628.3.Ie77732a87ab53d21bac47db309b75a796fa19337@changeid>
On 02/08/2023 11:57, Sheng-Liang Pan wrote:
> add BRD_ID(0, Z, 0) = 10 for new board with ALC5682i-VS
>
> Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
> ---
>
> arch/arm64/boot/dts/qcom/Makefile | 5 ++
> ...sc7180-trogdor-lazor-limozeen-nots-r10.dts | 39 +++++++++++++
> .../sc7180-trogdor-lazor-limozeen-nots-r9.dts | 4 +-
> .../sc7180-trogdor-lazor-limozeen-r10.dts | 55 +++++++++++++++++++
> .../qcom/sc7180-trogdor-lazor-limozeen-r9.dts | 4 +-
> .../dts/qcom/sc7180-trogdor-lazor-r10-kb.dts | 33 +++++++++++
> .../dts/qcom/sc7180-trogdor-lazor-r10-lte.dts | 37 +++++++++++++
> .../dts/qcom/sc7180-trogdor-lazor-r10.dts | 29 ++++++++++
> .../dts/qcom/sc7180-trogdor-lazor-r9-kb.dts | 4 +-
> .../dts/qcom/sc7180-trogdor-lazor-r9-lte.dts | 4 +-
> .../boot/dts/qcom/sc7180-trogdor-lazor-r9.dts | 4 +-
> 11 files changed, 208 insertions(+), 10 deletions(-)
> create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r10.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 337abc4ceb17..73e745fb1ff0 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -109,11 +109,16 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r3-lte.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r9.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r9-kb.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r9-lte.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r10.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r10-kb.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r10-lte.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-r4.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-r9.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-r10.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r4.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r5.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r9.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r10.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-parade.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-ti.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-parade.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts
> new file mode 100644
> index 000000000000..63602feceea6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts
> @@ -0,0 +1,39 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Lazor Limozeen board device tree source
> + *
> + * Copyright 2021 Google LLC.
> + */
> +
> +/dts-v1/;
> +
> +#include "sc7180.dtsi"
> +#include "sc7180-trogdor-parade-ps8640.dtsi"
> +#include "sc7180-trogdor-lazor.dtsi"
> +#include "sc7180-trogdor-lte-sku.dtsi"
> +
> +/ {
> + model = "Google Lazor Limozeen without Touchscreen (rev10+, rt5682s)";
> + compatible = "google,lazor-sku6", "google,lazor-sku18", "qcom,sc7180";
> +};
> +
> +/delete-node/&ap_ts;
> +
> +&panel {
> + compatible = "edp-panel";
> +};
> +
> +&sdhc_2 {
> + status = "okay";
> +};
> +
> +&alc5682 {
> + compatible = "realtek,rt5682s";
> + realtek,dmic1-clk-pin = <2>;
> + realtek,dmic-clk-rate-hz = <2048000>;
> +};
> +
> +&sound {
Overrides are ordered by name.
Best regards,
Krzysztof
prev parent reply other threads:[~2023-08-08 17:28 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-02 9:57 [PATCH 0/3] Add no-esim sku for sc7180-lazor family and new board version Sheng-Liang Pan
2023-08-02 9:57 ` [PATCH 1/3] dt-bindings: arm: qcom: add sc7180-lazor board bindings Sheng-Liang Pan
2023-08-02 20:53 ` Doug Anderson
2023-08-02 9:57 ` [PATCH 2/3] arm64: dts: qcom: Add sku_id for lazor/limozeen Sheng-Liang Pan
2023-08-02 20:53 ` Doug Anderson
2023-08-02 9:57 ` [PATCH 3/3] arm64: dts: qcom: Add board id " Sheng-Liang Pan
2023-08-02 20:53 ` Doug Anderson
2023-08-08 16:11 ` Krzysztof Kozlowski [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0c444142-3623-fa15-4bf6-df57d9804fdf@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=cros-qcom-dts-watchers@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sheng-liang.pan@quanta.corp-partner.google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).