From: Sibi Sankar <sibis@codeaurora.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <andy.gross@linaro.org>,
David Brown <david.brown@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Ohad Ben-Cohen <ohad@wizery.com>,
Arun Kumar Neelakantam <aneela@codeaurora.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-remoteproc@vger.kernel.org
Subject: Re: [PATCH v5 01/10] arm64: dts: qcom: sdm845: Update reserved memory map
Date: Thu, 31 Jan 2019 22:28:32 +0530 [thread overview]
Message-ID: <0c5cc8f10e3c78f4d0eead81abb90d85@codeaurora.org> (raw)
In-Reply-To: <20190131003933.11436-2-bjorn.andersson@linaro.org>
Hey Bjorn,
On 2019-01-31 06:09, Bjorn Andersson wrote:
> Update existing and add missing regions to the reserved memory map, as
> described in version 10.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>
> Changes since v4:
> - Labeled aop_mem, aop_cmd_db_mem and made tz_mem span the last TZ
> related segment
>
> Changes since v3:
> - Added hyp and xbl memory nodes.
> - Labeled all PIL nodes
>
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 72 +++++++++++++++++++++++++---
> 1 file changed, 66 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 33f5f4ba6160..45b1616392aa 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -73,12 +73,22 @@
> #size-cells = <2>;
> ranges;
>
> - memory@85fc0000 {
> + hyp_mem: memory@85700000 {
> + reg = <0x0 0x85700000 0 0x600000>;
> + no-map;
> + };
> +
> + xbl_mem: memory@85e00000 {
> + reg = <0x0 0x85e00000 0 0x100000>;
> + no-map;
> + };
> +
> + aop_mem: memory@85fc0000 {
> reg = <0 0x85fc0000 0 0x20000>;
> no-map;
> };
>
> - memory@85fe0000 {
> + aop_cmd_db_mem: memory@85fe0000 {
> compatible = "qcom,cmd-db";
> reg = <0x0 0x85fe0000 0x0 0x20000>;
> no-map;
> @@ -89,13 +99,43 @@
> no-map;
> };
>
> - memory@86200000 {
> - reg = <0 0x86200000 0 0x2d00000>;
> + tz_mem: memory@86200000 {
> + reg = <0 0x86200000 0 0x3c00000>;
should be 0x2d00000 instead of 0x3c00000
tz_mem ends at 0x88F00000 :-)
nit: Also for hyp_mem and xbl_mem you could
use 0 instead of 0x0
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
> + no-map;
> + };
> +
> + qseecom_mem: memory@8ab00000 {
> + reg = <0 0x8ab00000 0 0x1400000>;
> + no-map;
> + };
> +
> + camera_mem: memory@8bf00000 {
> + reg = <0 0x8bf00000 0 0x500000>;
> + no-map;
> + };
> +
> + ipa_fw_mem: memory@8c400000 {
> + reg = <0 0x8c400000 0 0x10000>;
> + no-map;
> + };
> +
> + ipa_gsi_mem: memory@8c410000 {
> + reg = <0 0x8c410000 0 0x5000>;
> no-map;
> };
>
> - wlan_msa_mem: memory@96700000 {
> - reg = <0 0x96700000 0 0x100000>;
> + gpu_mem: memory@8c415000 {
> + reg = <0 0x8c415000 0 0x2000>;
> + no-map;
> + };
> +
> + adsp_mem: memory@8c500000 {
> + reg = <0 0x8c500000 0 0x1a00000>;
> + no-map;
> + };
> +
> + wlan_msa_mem: memory@8df00000 {
> + reg = <0 0x8df00000 0 0x100000>;
> no-map;
> };
>
> @@ -104,10 +144,30 @@
> no-map;
> };
>
> + venus_mem: memory@95800000 {
> + reg = <0 0x95800000 0 0x500000>;
> + no-map;
> + };
> +
> + cdsp_mem: memory@95d00000 {
> + reg = <0 0x95d00000 0 0x800000>;
> + no-map;
> + };
> +
> mba_region: memory@96500000 {
> reg = <0 0x96500000 0 0x200000>;
> no-map;
> };
> +
> + slpi_mem: memory@96700000 {
> + reg = <0 0x96700000 0 0x1400000>;
> + no-map;
> + };
> +
> + spss_mem: memory@97b00000 {
> + reg = <0 0x97b00000 0 0x100000>;
> + no-map;
> + };
> };
>
> cpus {
--
-- Sibi Sankar --
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2019-01-31 16:58 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-31 0:39 [PATCH v5 00/10] Qualcomm AOSS QMP driver and modem dts Bjorn Andersson
2019-01-31 0:39 ` [PATCH v5 01/10] arm64: dts: qcom: sdm845: Update reserved memory map Bjorn Andersson
2019-01-31 16:58 ` Sibi Sankar [this message]
2019-01-31 0:39 ` [PATCH v5 02/10] arm64: dts: qcom: sdm845: Define rmtfs memory Bjorn Andersson
2019-01-31 17:09 ` Sibi Sankar
2019-01-31 0:39 ` [PATCH v5 03/10] arm64: dts: sdm845: Introduce ADSP and CDSP PAS nodes Bjorn Andersson
2019-02-01 5:49 ` Sibi Sankar
2019-02-01 23:54 ` Doug Anderson
2019-01-31 0:39 ` [PATCH v5 04/10] dt-bindings: soc: qcom: Add AOSS QMP binding Bjorn Andersson
2019-01-31 0:39 ` [PATCH v5 05/10] soc: qcom: Add AOSS QMP communication driver Bjorn Andersson
2019-02-01 23:36 ` Doug Anderson
2019-02-06 1:33 ` Bjorn Andersson
2019-01-31 0:39 ` [PATCH v5 06/10] soc: qcom: Add AOSS QMP genpd provider Bjorn Andersson
2019-02-01 7:15 ` Sibi Sankar
2019-02-01 23:39 ` Doug Anderson
2019-01-31 0:39 ` [PATCH v5 07/10] remoteproc: q6v5-mss: Vote for rpmh power domains Bjorn Andersson
2019-01-31 4:51 ` Bjorn Andersson
2019-01-31 0:39 ` [PATCH v5 08/10] remoteproc: q6v5-mss: Active powerdomain for SDM845 Bjorn Andersson
2019-01-31 4:51 ` Bjorn Andersson
2019-01-31 0:39 ` [PATCH v5 09/10] arm64: dts: qcom: Add AOSS QMP node Bjorn Andersson
2019-02-01 7:17 ` Sibi Sankar
2019-01-31 0:39 ` [PATCH v5 10/10] arm64: dts: qcom: sdm845: Add Q6V5 MSS node Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0c5cc8f10e3c78f4d0eead81abb90d85@codeaurora.org \
--to=sibis@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=aneela@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=ohad@wizery.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).