Re: [PATCH v4 1/3] dt-bindings: net: ti: k3-am654-cpsw-nuss: Update bindings for J7200 CPSW5G

[Siddharth Vadapalli <s-vadapalli@ti.com>]

On 19/08/22 15:59, Siddharth Vadapalli wrote:
> Hello Krzysztof,
> 
> On 17/08/22 13:11, Siddharth Vadapalli wrote:
>> Hello Krzysztof,
>>
>> On 17/08/22 11:20, Krzysztof Kozlowski wrote:
>>> On 17/08/2022 08:14, Siddharth Vadapalli wrote:
>>>
>>>>>> -      port@[1-2]:
>>>>>> +      "^port@[1-4]$":
>>>>>>          type: object
>>>>>>          description: CPSWxG NUSS external ports
>>>>>>  
>>>>>> @@ -119,7 +120,7 @@ properties:
>>>>>>          properties:
>>>>>>            reg:
>>>>>>              minimum: 1
>>>>>> -            maximum: 2
>>>>>> +            maximum: 4
>>>>>>              description: CPSW port number
>>>>>>  
>>>>>>            phys:
>>>>>> @@ -151,6 +152,18 @@ properties:
>>>>>>  
>>>>>>      additionalProperties: false
>>>>>>  
>>>>>> +if:
>>>>>
>>>>> This goes under allOf just before unevaluated/additionalProperties:false
>>>>
>>>> allOf was added by me in v3 series patch and it is not present in the
>>>> file. I removed it in v4 after Rob Herring's suggestion. Please let me
>>>> know if simply moving the if-then statements to the line above
>>>> additionalProperties:false would be fine.
>>>
>>> I think Rob's comment was focusing not on using or not-using allOf, but
>>> on format of your entire if-then-else. Your v3 was huge and included
>>> allOf in wrong place).
>>>
>>> Now you add if-then in proper place, but it is still advisable to put it
>>> with allOf, so if ever you grow the if-then by new entry, you do not
>>> have to change the indentation.
>>>
>>> Anyway the location is not correct. Regardless if this is if-then or
>>> allOf-if-then, put it just like example schema is suggesting.
>>
>> I will move the if-then statements to the lines above the
>> "additionalProperties: false" line. Also, I will add an allOf for this
> 
> I had a look at the example at [1] and it uses allOf after the
> "additionalProperties: false" line. Would it be fine then for me to add
> allOf and the single if-then statement below the "additionalProperties:
> false" line? Please let me know.
> 
> [1] -> https://github.com/devicetree-org/dt-schema/blob/mai/test/schemas/conditionals-allof-example.yaml

Sorry, the correct link is:
https://github.com/devicetree-org/dt-schema/blob/main/test/schemas/conditionals-allof-example.yaml

Regards,
Siddharth.