From: Christian Bruel <christian.bruel@foss.st.com>
To: <zhangsenchuan@eswincomputing.com>, <bhelgaas@google.com>,
<mani@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<lpieralisi@kernel.org>, <kwilczynski@kernel.org>,
<robh@kernel.org>, <p.zabel@pengutronix.de>,
<jingoohan1@gmail.com>, <gustavo.pimentel@synopsys.com>,
<linux-pci@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <mayank.rana@oss.qualcomm.com>,
<shradha.t@samsung.com>, <krishna.chundru@oss.qualcomm.com>,
<thippeswamy.havalige@amd.com>, <inochiama@gmail.com>,
<Frank.li@nxp.com>
Cc: <ningyu@eswincomputing.com>, <linmin@eswincomputing.com>,
<pinkesh.vaghela@einfochips.com>, <ouyanghui@eswincomputing.com>
Subject: Re: [PATCH v7 3/3] PCI: dwc: Add no_pme_handshake flag and skip PME_Turn_Off broadcast
Date: Wed, 3 Dec 2025 11:09:06 +0100 [thread overview]
Message-ID: <0d37ef61-4407-470b-975d-5f7a147f7f10@foss.st.com> (raw)
In-Reply-To: <20251202090434.1653-1-zhangsenchuan@eswincomputing.com>
Hello,
On 12/2/25 10:04, zhangsenchuan@eswincomputing.com wrote:
> From: Senchuan Zhang <zhangsenchuan@eswincomputing.com>
>
> The ESWIN EIC7700 SoC lacks hardware support for the L2/L3 low-power
> link states. It cannot enter the L2/L3 ready state through the
> PME_Turn_Off/PME_To_Ack handshake protocol. To address this, add a
> no_pme_handshake flag skip PME_Turn_Off broadcast and link state check
> code, other driver can reuse this flag if meet the similar situation.
What about testing !PME_SUPPORT in the PM Capabilities Register,
or just re-use the struct pci_dev pme_support flag ?
Regards,
>
> Signed-off-by: Yu Ning <ningyu@eswincomputing.com>
> Signed-off-by: Yanghui Ou <ouyanghui@eswincomputing.com>
> Signed-off-by: Senchuan Zhang <zhangsenchuan@eswincomputing.com>
> ---
> drivers/pci/controller/dwc/pcie-designware-host.c | 4 ++++
> drivers/pci/controller/dwc/pcie-designware.h | 1 +
> 2 files changed, 5 insertions(+)
>
> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> index 372207c33a85..8302bc7a6cbf 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> @@ -1168,6 +1168,9 @@ int dw_pcie_suspend_noirq(struct dw_pcie *pci)
> if (dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKCTL) & PCI_EXP_LNKCTL_ASPM_L1)
> return 0;
>
> + if (pci->no_pme_handshake)
> + goto stop_link;
> +
> if (pci->pp.ops->pme_turn_off) {
> pci->pp.ops->pme_turn_off(&pci->pp);
> } else {
> @@ -1194,6 +1197,7 @@ int dw_pcie_suspend_noirq(struct dw_pcie *pci)
> */
> udelay(1);
>
> +stop_link:
> dw_pcie_stop_link(pci);
> if (pci->pp.ops->deinit)
> pci->pp.ops->deinit(&pci->pp);
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index 31685951a080..e8057db303d0 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -549,6 +549,7 @@ struct dw_pcie {
> * use_parent_dt_ranges to true to avoid this warning.
> */
> bool use_parent_dt_ranges;
> + bool no_pme_handshake;
> };
>
> #define to_dw_pcie_from_pp(port) container_of((port), struct dw_pcie, pp)
> --
> 2.25.1
>
next prev parent reply other threads:[~2025-12-03 10:33 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-02 9:02 [PATCH v7 0/3] Add driver support for Eswin EIC7700 SoC PCIe controller zhangsenchuan
2025-12-02 9:03 ` [PATCH v7 1/3] dt-bindings: PCI: eic7700: Add Eswin PCIe host controller zhangsenchuan
2025-12-02 9:04 ` [PATCH v7 2/3] PCI: eic7700: Add Eswin PCIe host controller driver zhangsenchuan
2025-12-05 12:40 ` Krishna Chaitanya Chundru
2025-12-08 12:37 ` zhangsenchuan
2025-12-08 14:13 ` Krishna Chaitanya Chundru
2025-12-09 11:51 ` zhangsenchuan
2025-12-09 12:02 ` Krishna Chaitanya Chundru
2025-12-10 16:43 ` Bjorn Helgaas
2025-12-11 12:05 ` zhangsenchuan
2025-12-11 16:07 ` Bjorn Helgaas
2025-12-02 9:04 ` [PATCH v7 3/3] PCI: dwc: Add no_pme_handshake flag and skip PME_Turn_Off broadcast zhangsenchuan
2025-12-03 10:09 ` Christian Bruel [this message]
2025-12-05 10:24 ` zhangsenchuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0d37ef61-4407-470b-975d-5f7a147f7f10@foss.st.com \
--to=christian.bruel@foss.st.com \
--cc=Frank.li@nxp.com \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gustavo.pimentel@synopsys.com \
--cc=inochiama@gmail.com \
--cc=jingoohan1@gmail.com \
--cc=krishna.chundru@oss.qualcomm.com \
--cc=krzk+dt@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=linmin@eswincomputing.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=mayank.rana@oss.qualcomm.com \
--cc=ningyu@eswincomputing.com \
--cc=ouyanghui@eswincomputing.com \
--cc=p.zabel@pengutronix.de \
--cc=pinkesh.vaghela@einfochips.com \
--cc=robh@kernel.org \
--cc=shradha.t@samsung.com \
--cc=thippeswamy.havalige@amd.com \
--cc=zhangsenchuan@eswincomputing.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).