From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kukjin Kim Subject: RE: [PATCH 2/2] ARM: dts: Fix pinctrl settings for S2MPS11 RTC alarm IRQ on Arndale Octa Date: Mon, 27 Apr 2015 09:59:45 +0900 Message-ID: <0d3901d08085$73a05f00$5ae11d00$@kernel.org> References: <1427985376-20420-1-git-send-email-k.kozlowski@samsung.com> <1427985376-20420-3-git-send-email-k.kozlowski@samsung.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: In-reply-to: Content-language: ko Sender: linux-kernel-owner@vger.kernel.org To: 'Krzysztof Kozlowski' , 'Kukjin Kim' Cc: devicetree@vger.kernel.org, linux-samsung-soc@vger.kernel.org, 'Samuel Ortiz' , 'Sangbeom Kim' , linux-kernel@vger.kernel.org, 'Lee Jones' , 'Javier Martinez Canillas' , linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org Krzysztof Kozlowski wrote: > > 2015-04-02 23:36 GMT+09:00 Krzysztof Kozlowski : > > On Arndale Octa the S2MPS11 RTC alarm interrupt was not handled at all > > because of wrong configuration of interrupt and gpx3-2. > > 1. Interrupt is signaled by falling edge. > > 2. This GPIO line is hard-wired on the board to PVDD_APIO_1V8 through a > > resistor so pull-up/down must be disabled. > > > > Signed-off-by: Krzysztof Kozlowski > > --- > > arch/arm/boot/dts/exynos5420-arndale-octa.dts | 13 ++++++++++++- > > 1 file changed, 12 insertions(+), 1 deletion(-) > > Dear Kukjin, > > Any comments on this and other patches. A lot of emails waits for > your opinion. Is there anything I could do to help you in smooth > review or applying? > Sorry for the delay and looks good to me. Will apply into fixes branch and thanks. - Kukjin > Best regards, > Krzysztof > > > > > diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale- > octa.dts > > index d78fcd997ce6..97346df31d41 100644 > > --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts > > +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts > > @@ -87,7 +87,9 @@ > > s2mps11,buck4-ramp-enable = <1>; > > > > interrupt-parent = <&gpx3>; > > - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; > > + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&s2mps11_irq>; > > > > s2mps11_osc: clocks { > > #clock-cells = <1>; > > @@ -379,3 +381,12 @@ > > clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>; > > clock-names = "rtc", "rtc_src"; > > }; > > + > > +&pinctrl_0 { > > + s2mps11_irq: s2mps11-irq { > > + samsung,pins = "gpx3-2"; > > + samsung,pin-function = <0xf>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <0>; > > + }; > > +}; > > -- > > 1.9.1