Re: [PATCH 2/2] arm64: dts: ti: Add k3-am62-pocketbeagle2

[Vignesh Raghavendra <vigneshr@ti.com>]

Hi

On 11/02/25 23:48, Robert Nelson wrote:
> BeagleBoard.org PocketBeagle 2 is an upgraded version of the popular
> PocketBeagle.  It is based on Texas Instruments AM6232 SoC. Its dual
> A53 cores can provide higher performance than classic PocketBeagle.
> The new design comes with pre-soldered headers, a 3-pin JST-SH 1.00mm
> UART debug port, a USB-C port, Texas Instruments MSPM0L1105 Cortex-M0+
> MCU for ADC, 512MB RAM, and a LiPo Battery charger.
> 
> https://www.beagleboard.org/boards/pocketbeagle-2
> https://openbeagle.org/pocketbeagle/pocketbeagle-
> 
> Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
> CC: Rob Herring <robh@kernel.org>
> CC: Krzysztof Kozlowski <krzk+dt@kernel.org>
> CC: Conor Dooley <conor+dt@kernel.org>
> CC: Vignesh Raghavendra <vigneshr@ti.com>
> CC: Nishanth Menon <nm@ti.com>
> CC: Andrew Davis <afd@ti.com>
> CC: Roger Quadros <rogerq@kernel.org>
> CC: Siddharth Vadapalli <s-vadapalli@ti.com>
> CC: Judith Mendez <jm@ti.com>
> CC: Andrei Aldea <a-aldea@ti.com>
> CC: Jason Kridner <jkridner@beagleboard.org>
> CC: Deepak Khatri <lorforlinux@beagleboard.org>
> CC: Ayush Singh <ayush@beagleboard.org>


Please run make dtbs_check and fix the reported issues. Eg.:


+arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts: /bus@f0000/pinctrl@f4000/main_i2c2-default-pins: Character '_' not recommended in node name

[...]

> ----- 
Regards
Vignesh
https://ti.com/opensource