[PATCH v4 0/3] ath10k: Introduce a devicetree quirk to skip host cap QMI requests

[PATCH v4 0/3] ath10k: Introduce a devicetree quirk to skip host cap QMI requests

[David Heidelberg via B4 Relay]

This quirk is used so far used on:
 - LG G7 ThinQ
 - Xiaomi Poco F1

I'm resending it after ~ 4 years since initial send due to Snapdragon
845 being one of best supported platform for mobile phones running
Linux, so it would be shame to not have shiny support.

Original thread:
  https://lore.kernel.org/all/b796bfee-b753-479a-a8d6-ba1fe3ee6222@ixit.cz/

I tried the embedding the information inside the firmware, but the
information is required *before* loading the firmware itself.
Firmware quirk thread:
  https://lore.kernel.org/linux-wireless/20251111-xiaomi-beryllium-firmware-v1-0-836b9c51ad86@ixit.cz/

Until merged, available also at:
  https://codeberg.org/sdm845/linux/commits/branch/b4/skip-host-cam-qmi-req

Signed-off-by: David Heidelberg <david@ixit.cz>
---
Changes in v4:
- Added my own missing SoB. (Dmitry)
- Improve the commit message. (Dmitry)
- Link to v3: https://lore.kernel.org/r/20260325-skip-host-cam-qmi-req-v3-0-b163cf7b3c81@ixit.cz

Changes in v3:
- Rebased on recent linux-next (next-20260325).
- Improved motivation and description. (Dmitry)
- Link to v2: https://lore.kernel.org/r/20251110-skip-host-cam-qmi-req-v2-0-0daf485a987a@ixit.cz

---
Amit Pundir (3):
      dt-bindings: wireless: ath10k: Add quirk to skip host cap QMI requests
      ath10k: Add device-tree quirk to skip host cap QMI requests
      arm64: dts: qcom: sdm845-xiaomi-beryllium: Enable ath10k host-cap skip quirk

 .../devicetree/bindings/net/wireless/qcom,ath10k.yaml       |  6 ++++++
 .../arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi |  1 +
 drivers/net/wireless/ath/ath10k/qmi.c                       | 13 ++++++++++---
 drivers/net/wireless/ath/ath10k/snoc.c                      |  3 +++
 drivers/net/wireless/ath/ath10k/snoc.h                      |  1 +
 5 files changed, 21 insertions(+), 3 deletions(-)
---
base-commit: 85964cdcad0fac9a0eb7b87a0f9d88cc074b854c
change-id: 20251110-skip-host-cam-qmi-req-e155628ebc39

Best regards,
-- 
David Heidelberg <david@ixit.cz>

[PATCH v4 1/3] dt-bindings: wireless: ath10k: Add quirk to skip host cap QMI requests

[David Heidelberg via B4 Relay]

From: Amit Pundir <amit.pundir@linaro.org>

Some firmware versions do not support the host-capability QMI request.
Since this request occurs before firmware and board files are loaded,
the quirk cannot be expressed in the firmware itself and must be described
in the device tree.

Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
---
 Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
index f2440d39b7ebc..5120b3589ab57 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
@@ -171,6 +171,12 @@ properties:
       Quirk specifying that the firmware expects the 8bit version
       of the host capability QMI request
 
+  qcom,snoc-host-cap-skip-quirk:
+    type: boolean
+    description:
+      Quirk specifying that the firmware wants to skip the host
+      capability QMI request
+
   qcom,xo-cal-data:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:

-- 
2.53.0

[PATCH v4 2/3] ath10k: Add device-tree quirk to skip host cap QMI requests

[David Heidelberg via B4 Relay]

From: Amit Pundir <amit.pundir@linaro.org>

Some firmware versions do not support the host capability QMI request.
Since this request occurs before firmware-N.bin and board-M.bin are
loaded, the quirk cannot be expressed in the firmware itself.

The root cause is unclear, but there appears to be a generation of
firmware that lacks host capability support.

Without this quirk, ath10k_qmi_host_cap_send_sync() returns
QMI_ERR_MALFORMED_MSG_V01 before loading the firmware. This error is not
fatal - Wi-Fi services still come up successfully if the request is simply
skipped.

Add a device-tree quirk to skip the host capability QMI request on devices
whose firmware does not support it.

For example, firmware build
"QC_IMAGE_VERSION_STRING=WLAN.HL.2.0.c3-00257-QCAHLSWMTPLZ-1"
on Xiaomi Poco F1 phone requires this quirk.

Suggested-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
---
 drivers/net/wireless/ath/ath10k/qmi.c  | 13 ++++++++++---
 drivers/net/wireless/ath/ath10k/snoc.c |  3 +++
 drivers/net/wireless/ath/ath10k/snoc.h |  1 +
 3 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c
index eebd78e7ff6bc..e7f90fd9e9b83 100644
--- a/drivers/net/wireless/ath/ath10k/qmi.c
+++ b/drivers/net/wireless/ath/ath10k/qmi.c
@@ -808,6 +808,7 @@ ath10k_qmi_ind_register_send_sync_msg(struct ath10k_qmi *qmi)
 static void ath10k_qmi_event_server_arrive(struct ath10k_qmi *qmi)
 {
 	struct ath10k *ar = qmi->ar;
+	struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);
 	int ret;
 
 	ret = ath10k_qmi_ind_register_send_sync_msg(qmi);
@@ -819,9 +820,15 @@ static void ath10k_qmi_event_server_arrive(struct ath10k_qmi *qmi)
 		return;
 	}
 
-	ret = ath10k_qmi_host_cap_send_sync(qmi);
-	if (ret)
-		return;
+	/*
+	 * Skip the host capability request for the firmware versions which
+	 * do not support this feature.
+	 */
+	if (!test_bit(ATH10K_SNOC_FLAG_SKIP_HOST_CAP_QUIRK, &ar_snoc->flags)) {
+		ret = ath10k_qmi_host_cap_send_sync(qmi);
+		if (ret)
+			return;
+	}
 
 	ret = ath10k_qmi_msa_mem_info_send_sync_msg(qmi);
 	if (ret)
diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index f72f236fb9eb3..3106502275781 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -1362,6 +1362,9 @@ static void ath10k_snoc_quirks_init(struct ath10k *ar)
 
 	if (of_property_read_bool(dev->of_node, "qcom,snoc-host-cap-8bit-quirk"))
 		set_bit(ATH10K_SNOC_FLAG_8BIT_HOST_CAP_QUIRK, &ar_snoc->flags);
+
+	if (of_property_read_bool(dev->of_node, "qcom,snoc-host-cap-skip-quirk"))
+		set_bit(ATH10K_SNOC_FLAG_SKIP_HOST_CAP_QUIRK, &ar_snoc->flags);
 }
 
 int ath10k_snoc_fw_indication(struct ath10k *ar, u64 type)
diff --git a/drivers/net/wireless/ath/ath10k/snoc.h b/drivers/net/wireless/ath/ath10k/snoc.h
index 1ecae34687c21..46574fd8f84ee 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.h
+++ b/drivers/net/wireless/ath/ath10k/snoc.h
@@ -51,6 +51,7 @@ enum ath10k_snoc_flags {
 	ATH10K_SNOC_FLAG_MODEM_STOPPED,
 	ATH10K_SNOC_FLAG_RECOVERY,
 	ATH10K_SNOC_FLAG_8BIT_HOST_CAP_QUIRK,
+	ATH10K_SNOC_FLAG_SKIP_HOST_CAP_QUIRK,
 };
 
 struct clk_bulk_data;

-- 
2.53.0

[PATCH v4 3/3] arm64: dts: qcom: sdm845-xiaomi-beryllium: Enable ath10k host-cap skip quirk

[David Heidelberg via B4 Relay]

From: Amit Pundir <amit.pundir@linaro.org>

The Wi-Fi firmware used on Xiaomi Poco F1 (beryllium) phone doesn't
support the host-capability QMI request, so add a quirk to skip it on
this device.

Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
---
 arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index 1298485c42142..950bbcc3bf91f 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -661,5 +661,6 @@ &wifi {
 	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
 
 	qcom,calibration-variant = "xiaomi_beryllium";
+	qcom,snoc-host-cap-skip-quirk;
 };
 

-- 
2.53.0

Re: [PATCH v4 2/3] ath10k: Add device-tree quirk to skip host cap QMI requests

[Paul Sajna]

March 25, 2026 at 5:57 PM, "David Heidelberg via B4 Relay" <devnull+david.ixit.cz@kernel.org mailto:devnull+david.ixit.cz@kernel.org?to=%22David%20Heidelberg%20via%20B4%20Relay%22%20%3Cdevnull%2Bdavid.ixit.cz%40kernel.org%3E > wrote:


> 
> From: Amit Pundir <amit.pundir@linaro.org>
> 
> Some firmware versions do not support the host capability QMI request.
> Since this request occurs before firmware-N.bin and board-M.bin are
> loaded, the quirk cannot be expressed in the firmware itself.
> 
> The root cause is unclear, but there appears to be a generation of
> firmware that lacks host capability support.
> 
> Without this quirk, ath10k_qmi_host_cap_send_sync() returns
> QMI_ERR_MALFORMED_MSG_V01 before loading the firmware. This error is not
> fatal - Wi-Fi services still come up successfully if the request is simply
> skipped.
> 
> Add a device-tree quirk to skip the host capability QMI request on devices
> whose firmware does not support it.
> 
> For example, firmware build
> "QC_IMAGE_VERSION_STRING=WLAN.HL.2.0.c3-00257-QCAHLSWMTPLZ-1"
> on Xiaomi Poco F1 phone requires this quirk.
> 
> Suggested-by: Bjorn Andersson <andersson@kernel.org>
> Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---
>  drivers/net/wireless/ath/ath10k/qmi.c | 13 ++++++++++---
>  drivers/net/wireless/ath/ath10k/snoc.c | 3 +++
>  drivers/net/wireless/ath/ath10k/snoc.h | 1 +
>  3 files changed, 14 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c
> index eebd78e7ff6bc..e7f90fd9e9b83 100644
> --- a/drivers/net/wireless/ath/ath10k/qmi.c
> +++ b/drivers/net/wireless/ath/ath10k/qmi.c
> @@ -808,6 +808,7 @@ ath10k_qmi_ind_register_send_sync_msg(struct ath10k_qmi *qmi)
>  static void ath10k_qmi_event_server_arrive(struct ath10k_qmi *qmi)
>  {
>  struct ath10k *ar = qmi->ar;
> + struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);
>  int ret;
>  
>  ret = ath10k_qmi_ind_register_send_sync_msg(qmi);
> @@ -819,9 +820,15 @@ static void ath10k_qmi_event_server_arrive(struct ath10k_qmi *qmi)
>  return;
>  }
>  
> - ret = ath10k_qmi_host_cap_send_sync(qmi);
> - if (ret)
> - return;
> + /*
> + * Skip the host capability request for the firmware versions which
> + * do not support this feature.
> + */
> + if (!test_bit(ATH10K_SNOC_FLAG_SKIP_HOST_CAP_QUIRK, &ar_snoc->flags)) {
> + ret = ath10k_qmi_host_cap_send_sync(qmi);
> + if (ret)
> + return;
> + }
>  
>  ret = ath10k_qmi_msa_mem_info_send_sync_msg(qmi);
>  if (ret)
> diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
> index f72f236fb9eb3..3106502275781 100644
> --- a/drivers/net/wireless/ath/ath10k/snoc.c
> +++ b/drivers/net/wireless/ath/ath10k/snoc.c
> @@ -1362,6 +1362,9 @@ static void ath10k_snoc_quirks_init(struct ath10k *ar)
>  
>  if (of_property_read_bool(dev->of_node, "qcom,snoc-host-cap-8bit-quirk"))
>  set_bit(ATH10K_SNOC_FLAG_8BIT_HOST_CAP_QUIRK, &ar_snoc->flags);
> +
> + if (of_property_read_bool(dev->of_node, "qcom,snoc-host-cap-skip-quirk"))
> + set_bit(ATH10K_SNOC_FLAG_SKIP_HOST_CAP_QUIRK, &ar_snoc->flags);
>  }
>  
>  int ath10k_snoc_fw_indication(struct ath10k *ar, u64 type)
> diff --git a/drivers/net/wireless/ath/ath10k/snoc.h b/drivers/net/wireless/ath/ath10k/snoc.h
> index 1ecae34687c21..46574fd8f84ee 100644
> --- a/drivers/net/wireless/ath/ath10k/snoc.h
> +++ b/drivers/net/wireless/ath/ath10k/snoc.h
> @@ -51,6 +51,7 @@ enum ath10k_snoc_flags {
>  ATH10K_SNOC_FLAG_MODEM_STOPPED,
>  ATH10K_SNOC_FLAG_RECOVERY,
>  ATH10K_SNOC_FLAG_8BIT_HOST_CAP_QUIRK,
> + ATH10K_SNOC_FLAG_SKIP_HOST_CAP_QUIRK,
>  };
>  
>  struct clk_bulk_data;
> 
> -- 
> 2.53.0
>

Tested-by: Paul Sajna <sajattack@postmarketos.org>

Re: [PATCH v4 2/3] ath10k: Add device-tree quirk to skip host cap QMI requests

[Dmitry Baryshkov]

On Wed, Mar 25, 2026 at 06:57:16PM +0100, David Heidelberg via B4 Relay wrote:
> From: Amit Pundir <amit.pundir@linaro.org>
> 
> Some firmware versions do not support the host capability QMI request.
> Since this request occurs before firmware-N.bin and board-M.bin are
> loaded, the quirk cannot be expressed in the firmware itself.


Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

Jeff, to my knowledge this is the best approach that we have to solve
the issue on those devices.

> 
> The root cause is unclear, but there appears to be a generation of
> firmware that lacks host capability support.
> 
> Without this quirk, ath10k_qmi_host_cap_send_sync() returns
> QMI_ERR_MALFORMED_MSG_V01 before loading the firmware. This error is not
> fatal - Wi-Fi services still come up successfully if the request is simply
> skipped.
> 
> Add a device-tree quirk to skip the host capability QMI request on devices
> whose firmware does not support it.
> 
> For example, firmware build
> "QC_IMAGE_VERSION_STRING=WLAN.HL.2.0.c3-00257-QCAHLSWMTPLZ-1"
> on Xiaomi Poco F1 phone requires this quirk.
> 
> Suggested-by: Bjorn Andersson <andersson@kernel.org>
> Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---
>  drivers/net/wireless/ath/ath10k/qmi.c  | 13 ++++++++++---
>  drivers/net/wireless/ath/ath10k/snoc.c |  3 +++
>  drivers/net/wireless/ath/ath10k/snoc.h |  1 +
>  3 files changed, 14 insertions(+), 3 deletions(-)

-- 
With best wishes
Dmitry

Re: [PATCH v4 3/3] arm64: dts: qcom: sdm845-xiaomi-beryllium: Enable ath10k host-cap skip quirk

[Dmitry Baryshkov]

On Wed, Mar 25, 2026 at 06:57:17PM +0100, David Heidelberg via B4 Relay wrote:
> From: Amit Pundir <amit.pundir@linaro.org>
> 
> The Wi-Fi firmware used on Xiaomi Poco F1 (beryllium) phone doesn't
> support the host-capability QMI request, so add a quirk to skip it on
> this device.
> 
> Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---
>  arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi | 1 +
>  1 file changed, 1 insertion(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>


-- 
With best wishes
Dmitry

Re: [PATCH v4 2/3] ath10k: Add device-tree quirk to skip host cap QMI requests

[Jeff Johnson]

On 3/29/2026 9:26 AM, Dmitry Baryshkov wrote:
> On Wed, Mar 25, 2026 at 06:57:16PM +0100, David Heidelberg via B4 Relay wrote:
>> From: Amit Pundir <amit.pundir@linaro.org>
>>
>> Some firmware versions do not support the host capability QMI request.
>> Since this request occurs before firmware-N.bin and board-M.bin are
>> loaded, the quirk cannot be expressed in the firmware itself.
> 
> 
> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> 
> Jeff, to my knowledge this is the best approach that we have to solve
> the issue on those devices.

I'm ok with this approach.

I need DT Review or ACK on the 1/3 patch in order to bring the first 2 patches
through my ath tree.

/jeff

Re: [PATCH v4 2/3] ath10k: Add device-tree quirk to skip host cap QMI requests

[Dmitry Baryshkov]

On Mon, Mar 30, 2026 at 11:56:16AM -0700, Jeff Johnson wrote:
> On 3/29/2026 9:26 AM, Dmitry Baryshkov wrote:
> > On Wed, Mar 25, 2026 at 06:57:16PM +0100, David Heidelberg via B4 Relay wrote:
> >> From: Amit Pundir <amit.pundir@linaro.org>
> >>
> >> Some firmware versions do not support the host capability QMI request.
> >> Since this request occurs before firmware-N.bin and board-M.bin are
> >> loaded, the quirk cannot be expressed in the firmware itself.
> > 
> > 
> > Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> > 
> > Jeff, to my knowledge this is the best approach that we have to solve
> > the issue on those devices.
> 
> I'm ok with this approach.
> 
> I need DT Review or ACK on the 1/3 patch in order to bring the first 2 patches
> through my ath tree.

Yes, of course.

-- 
With best wishes
Dmitry

Re: [PATCH v4 2/3] ath10k: Add device-tree quirk to skip host cap QMI requests

[Vasanthakumar Thiagarajan]

On 3/25/2026 11:27 PM, David Heidelberg via B4 Relay wrote:
> From: Amit Pundir <amit.pundir@linaro.org>
> 
> Some firmware versions do not support the host capability QMI request.
> Since this request occurs before firmware-N.bin and board-M.bin are
> loaded, the quirk cannot be expressed in the firmware itself.
> 
> The root cause is unclear, but there appears to be a generation of
> firmware that lacks host capability support.
> 
> Without this quirk, ath10k_qmi_host_cap_send_sync() returns
> QMI_ERR_MALFORMED_MSG_V01 before loading the firmware. This error is not
> fatal - Wi-Fi services still come up successfully if the request is simply
> skipped.
> 
> Add a device-tree quirk to skip the host capability QMI request on devices
> whose firmware does not support it.
> 
> For example, firmware build
> "QC_IMAGE_VERSION_STRING=WLAN.HL.2.0.c3-00257-QCAHLSWMTPLZ-1"
> on Xiaomi Poco F1 phone requires this quirk.
> 
> Suggested-by: Bjorn Andersson <andersson@kernel.org>
> Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
> Signed-off-by: David Heidelberg <david@ixit.cz>

Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>

Re: [PATCH v4 1/3] dt-bindings: wireless: ath10k: Add quirk to skip host cap QMI requests

[Jeff Johnson]

On 3/25/2026 10:57 AM, David Heidelberg via B4 Relay wrote:
> From: Amit Pundir <amit.pundir@linaro.org>
> 
> Some firmware versions do not support the host-capability QMI request.
> Since this request occurs before firmware and board files are loaded,
> the quirk cannot be expressed in the firmware itself and must be described
> in the device tree.
> 
> Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---
>  Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
> index f2440d39b7ebc..5120b3589ab57 100644
> --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
> @@ -171,6 +171,12 @@ properties:
>        Quirk specifying that the firmware expects the 8bit version
>        of the host capability QMI request
>  
> +  qcom,snoc-host-cap-skip-quirk:
> +    type: boolean
> +    description:
> +      Quirk specifying that the firmware wants to skip the host
> +      capability QMI request
> +
>    qcom,xo-cal-data:
>      $ref: /schemas/types.yaml#/definitions/uint32
>      description:
> 

DT folks, there is a pending DTS series [1] that would like to reference this
capability. Would like to get an ack so I can get this in the upcoming merge
window.

Thanks,
/jeff

[1] https://lore.kernel.org/all/20260401-judyln-dts-v8-0-7677cfafbc78@postmarketos.org/

Re: [PATCH v4 2/3] ath10k: Add device-tree quirk to skip host cap QMI requests

[Baochen Qiang]

On 3/26/2026 1:57 AM, David Heidelberg via B4 Relay wrote:
> From: Amit Pundir <amit.pundir@linaro.org>
> 
> Some firmware versions do not support the host capability QMI request.
> Since this request occurs before firmware-N.bin and board-M.bin are
> loaded, the quirk cannot be expressed in the firmware itself.
> 
> The root cause is unclear, but there appears to be a generation of
> firmware that lacks host capability support.
> 
> Without this quirk, ath10k_qmi_host_cap_send_sync() returns
> QMI_ERR_MALFORMED_MSG_V01 before loading the firmware. This error is not
> fatal - Wi-Fi services still come up successfully if the request is simply
> skipped.
> 
> Add a device-tree quirk to skip the host capability QMI request on devices
> whose firmware does not support it.
> 
> For example, firmware build
> "QC_IMAGE_VERSION_STRING=WLAN.HL.2.0.c3-00257-QCAHLSWMTPLZ-1"
> on Xiaomi Poco F1 phone requires this quirk.
> 
> Suggested-by: Bjorn Andersson <andersson@kernel.org>
> Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---
>  drivers/net/wireless/ath/ath10k/qmi.c  | 13 ++++++++++---
>  drivers/net/wireless/ath/ath10k/snoc.c |  3 +++
>  drivers/net/wireless/ath/ath10k/snoc.h |  1 +
>  3 files changed, 14 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c
> index eebd78e7ff6bc..e7f90fd9e9b83 100644
> --- a/drivers/net/wireless/ath/ath10k/qmi.c
> +++ b/drivers/net/wireless/ath/ath10k/qmi.c
> @@ -808,6 +808,7 @@ ath10k_qmi_ind_register_send_sync_msg(struct ath10k_qmi *qmi)
>  static void ath10k_qmi_event_server_arrive(struct ath10k_qmi *qmi)
>  {
>  	struct ath10k *ar = qmi->ar;
> +	struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);
>  	int ret;
>  
>  	ret = ath10k_qmi_ind_register_send_sync_msg(qmi);
> @@ -819,9 +820,15 @@ static void ath10k_qmi_event_server_arrive(struct ath10k_qmi *qmi)
>  		return;
>  	}
>  
> -	ret = ath10k_qmi_host_cap_send_sync(qmi);
> -	if (ret)
> -		return;
> +	/*
> +	 * Skip the host capability request for the firmware versions which
> +	 * do not support this feature.
> +	 */
> +	if (!test_bit(ATH10K_SNOC_FLAG_SKIP_HOST_CAP_QUIRK, &ar_snoc->flags)) {
> +		ret = ath10k_qmi_host_cap_send_sync(qmi);
> +		if (ret)
> +			return;
> +	}
>  
>  	ret = ath10k_qmi_msa_mem_info_send_sync_msg(qmi);
>  	if (ret)
> diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
> index f72f236fb9eb3..3106502275781 100644
> --- a/drivers/net/wireless/ath/ath10k/snoc.c
> +++ b/drivers/net/wireless/ath/ath10k/snoc.c
> @@ -1362,6 +1362,9 @@ static void ath10k_snoc_quirks_init(struct ath10k *ar)
>  
>  	if (of_property_read_bool(dev->of_node, "qcom,snoc-host-cap-8bit-quirk"))
>  		set_bit(ATH10K_SNOC_FLAG_8BIT_HOST_CAP_QUIRK, &ar_snoc->flags);
> +
> +	if (of_property_read_bool(dev->of_node, "qcom,snoc-host-cap-skip-quirk"))
> +		set_bit(ATH10K_SNOC_FLAG_SKIP_HOST_CAP_QUIRK, &ar_snoc->flags);
>  }
>  
>  int ath10k_snoc_fw_indication(struct ath10k *ar, u64 type)
> diff --git a/drivers/net/wireless/ath/ath10k/snoc.h b/drivers/net/wireless/ath/ath10k/snoc.h
> index 1ecae34687c21..46574fd8f84ee 100644
> --- a/drivers/net/wireless/ath/ath10k/snoc.h
> +++ b/drivers/net/wireless/ath/ath10k/snoc.h
> @@ -51,6 +51,7 @@ enum ath10k_snoc_flags {
>  	ATH10K_SNOC_FLAG_MODEM_STOPPED,
>  	ATH10K_SNOC_FLAG_RECOVERY,
>  	ATH10K_SNOC_FLAG_8BIT_HOST_CAP_QUIRK,
> +	ATH10K_SNOC_FLAG_SKIP_HOST_CAP_QUIRK,
>  };
>  
>  struct clk_bulk_data;
> 

Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>

Re: [PATCH v4 1/3] dt-bindings: wireless: ath10k: Add quirk to skip host cap QMI requests

[Krzysztof Kozlowski]

On 25/03/2026 18:57, David Heidelberg via B4 Relay wrote:
> From: Amit Pundir <amit.pundir@linaro.org>
> 
> Some firmware versions do not support the host-capability QMI request.
> Since this request occurs before firmware and board files are loaded,
> the quirk cannot be expressed in the firmware itself and must be described
> in the device tree.
> 
> Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---
>  Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
> index f2440d39b7ebc..5120b3589ab57 100644
> --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
> @@ -171,6 +171,12 @@ properties:
>        Quirk specifying that the firmware expects the 8bit version
>        of the host capability QMI request
>  
> +  qcom,snoc-host-cap-skip-quirk:
> +    type: boolean
> +    description:
> +      Quirk specifying that the firmware wants to skip the host
> +      capability QMI request
> +

Property is fine, looks conflicting with qcom,snoc-host-cap-8bit-quirk
though. Either you skip QMI or use specific format of that request.

You need
https://lore.kernel.org/all/20230118163208.GA117919-robh@kernel.org/

allOf:
  - not:
      required:


Best regards,
Krzysztof

Re: [PATCH v4 0/3] ath10k: Introduce a devicetree quirk to skip host cap QMI requests

[Jeff Johnson]

On Wed, 25 Mar 2026 18:57:14 +0100, David Heidelberg wrote:
> This quirk is used so far used on:
>  - LG G7 ThinQ
>  - Xiaomi Poco F1
> 
> I'm resending it after ~ 4 years since initial send due to Snapdragon
> 845 being one of best supported platform for mobile phones running
> Linux, so it would be shame to not have shiny support.
> 
> [...]

Applied, thanks!

[1/3] dt-bindings: wireless: ath10k: Add quirk to skip host cap QMI requests
      commit: 3d7640b6c371a1795e6d9580695d20caf16be9a4
[2/3] ath10k: Add device-tree quirk to skip host cap QMI requests
      (no commit info)
[3/3] arm64: dts: qcom: sdm845-xiaomi-beryllium: Enable ath10k host-cap skip quirk
      (no commit info)

Best regards,
-- 
Jeff Johnson <jeff.johnson@oss.qualcomm.com>

Re: [PATCH v4 0/3] ath10k: Introduce a devicetree quirk to skip host cap QMI requests

[Jeff Johnson]

On 4/8/2026 10:15 AM, Jeff Johnson wrote:
> 
> On Wed, 25 Mar 2026 18:57:14 +0100, David Heidelberg wrote:
>> This quirk is used so far used on:
>>  - LG G7 ThinQ
>>  - Xiaomi Poco F1
>>
>> I'm resending it after ~ 4 years since initial send due to Snapdragon
>> 845 being one of best supported platform for mobile phones running
>> Linux, so it would be shame to not have shiny support.
>>
>> [...]
> 
> Applied, thanks!
> 
> [1/3] dt-bindings: wireless: ath10k: Add quirk to skip host cap QMI requests
>       commit: 3d7640b6c371a1795e6d9580695d20caf16be9a4
> [2/3] ath10k: Add device-tree quirk to skip host cap QMI requests
>       (no commit info)
> [3/3] arm64: dts: qcom: sdm845-xiaomi-beryllium: Enable ath10k host-cap skip quirk
>       (no commit info)
> 
> Best regards,

Sigh, I did NOT take v4 of this series.
I did take the 1-2/3 subset of v5.

Note the self: actually look at the output from 'b4 ty --dry-run' before
removing the --dry-run

/jeff