Re: [PATCH] arm64: dts: ti: k3-am62p-mcu/wakeup: Disable MCU and wakeup R5FSS nodes

[Jayesh Choudhary <j-choudhary@ti.com>]

Hello Vaishnav,

On 21/01/24 19:10, Vaishnav Achath wrote:
> K3 Remoteproc R5 driver requires reserved memory carveouts and
> mailbox configuration to instantiate the cores successfully.
> Since this is a board level dependency, keep the R5 subsytem
> disabled at SoC dtsi, otherwise it results in probe errors like
> below during AM62P SK boot:
> 
> r5fss@79000000: reserved memory init failed, ret = -22
> r5fss@79000000: k3_r5_cluster_rproc_init failed, ret = -22
> r5fss@78000000: reserved memory init failed, ret = -22
> r5fss@78000000: k3_r5_cluster_rproc_init failed, ret = -22
> 
> Fixes: b5080c7c1f7e ("arm64: dts: ti: k3-am62p: Add nodes for more IPs")
> 
> Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>

Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com>

> ---
>   arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi    | 2 ++
>   arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi | 1 +
>   2 files changed, 3 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi
> index c4b0b91d70cf..14eb9ba836d3 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi
> @@ -187,6 +187,8 @@ mcu_r5fss0: r5fss@79000000 {
>   		ranges = <0x79000000 0x00 0x79000000 0x8000>,
>   			 <0x79020000 0x00 0x79020000 0x8000>;
>   		power-domains = <&k3_pds 7 TI_SCI_PD_EXCLUSIVE>;
> +		status = "disabled";
> +
>   		mcu_r5fss0_core0: r5f@79000000 {
>   			compatible = "ti,am62-r5f";
>   			reg = <0x79000000 0x00008000>,
> diff --git a/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi
> index 19f42b39394e..10a7059b2d9b 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi
> @@ -78,6 +78,7 @@ wkup_r5fss0: r5fss@78000000 {
>   		ranges = <0x78000000 0x00 0x78000000 0x8000>,
>   			 <0x78100000 0x00 0x78100000 0x8000>;
>   		power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
> +		status = "disabled";
>   
>   		wkup_r5fss0_core0: r5f@78000000 {
>   			compatible = "ti,am62-r5f";

Thanks.