From: "Heiko Stübner" <heiko@sntech.de>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: mchehab@kernel.org, hverkuil-cisco@xs4all.nl,
ezequiel@collabora.com, dafna.hirschfeld@collabora.com,
helen.koike@collabora.com, linux-rockchip@lists.infradead.org,
linux-media@vger.kernel.org, robh+dt@kernel.org,
devicetree@vger.kernel.org
Subject: Re: [PATCH v6 0/7] rkisp1 support for px30
Date: Mon, 12 Jul 2021 22:46:26 +0200 [thread overview]
Message-ID: <10918018.2OtUDhi4od@diego> (raw)
In-Reply-To: <YOyos6b4QvLkl6//@pendragon.ideasonboard.com>
Hi Laurent,
Am Montag, 12. Juli 2021, 22:40:19 CEST schrieb Laurent Pinchart:
> Hi Heiko,
>
> On Fri, Jun 18, 2021 at 03:02:28PM +0200, Heiko Stuebner wrote:
> > This series adds support for the slightly different v12
> > variant of the ISP used for example in the px30 soc.
>
> Nice :-)
>
> How have you tested this ?
I have this running on a px30-evb with the integrated camera.
With libcamera's tools/rkisp1 script it works out of the box,
but there is also my still pending little libcamera patch to add actual
support for the changed values [0] which then even makes qcam
work nicely ;-) .
Heiko
[0] https://patchwork.libcamera.org/patch/12668/
>
> > changes in v6:
> > - camera compatible in px30 binding example (Rob's bot)
> > - move a last wrong positionen constant define (a v12 addition
> > should not be added in the v10-prefix change) (Dafna)
> > - rename size to clk_size in match-data struct (Dafna)
> >
> > changes in v5:
> > - handle interrupt-names as conditional required property (Dafna)
> > - add second example for showing interrupt-names (Dafna)
> >
> > changes in v4:
> > - clean up multi-irq case (Dafna)
> > Now each variant can have a list of interrupts
> > and their respective handlers, with or without
> > interrupt-names
> >
> > changes in v3:
> > - add necessary binding additions
> > - fix pclk naming in binding
> > - move v12 clk_ctrl register bits to v12 addition patch
> > - fix rebase artefact with hst_enable
> >
> > changes in v2 (from rfc):
> > - split out phy patch into a separate series
> > - drop dts patches for now
> > - split v12 addition and v10 prefixes into separate patches
> > to enable easier review (Dafna)
> > - remove {stats,params}_config structs, we can just use the
> > correct constant (Dafna)
> > - adapt to styling comments from Dafna and Helen
> > - add patch to remove the unused irq variable in struct rkisp
> >
> > Heiko Stuebner (10):
> > media: rockchip: rkisp1: remove unused irq variable
> > dt-bindings: media: rkisp1: fix pclk clock-name
> > dt-bindings: media: rkisp1: document different irq possibilities
> > media: rockchip: rkisp1: allow separate interrupts
> > media: rockchip: rkisp1: make some isp-param functions variable
> > media: rockchip: rkisp1: make some isp-stats functions variable
> > media: rockchip: rkisp1: add prefixes for v10 specific parts
> > media: rockchip: rkisp1: add support for v12 isp variants
> > dt-bindings: media: rkisp1: document px30 isp compatible
> > media: rockchip: rkisp1: add support for px30 isp version
> >
> > .../bindings/media/rockchip-isp1.yaml | 114 +++-
> > .../platform/rockchip/rkisp1/rkisp1-capture.c | 9 +-
> > .../platform/rockchip/rkisp1/rkisp1-common.h | 44 +-
> > .../platform/rockchip/rkisp1/rkisp1-dev.c | 81 ++-
> > .../platform/rockchip/rkisp1/rkisp1-isp.c | 29 +-
> > .../platform/rockchip/rkisp1/rkisp1-params.c | 557 ++++++++++++++----
> > .../platform/rockchip/rkisp1/rkisp1-regs.h | 406 ++++++++-----
> > .../platform/rockchip/rkisp1/rkisp1-stats.c | 107 +++-
> > 8 files changed, 1050 insertions(+), 297 deletions(-)
>
>
prev parent reply other threads:[~2021-07-12 20:46 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-18 13:02 [PATCH v6 0/7] rkisp1 support for px30 Heiko Stuebner
2021-06-18 13:02 ` [PATCH v6 01/10] media: rockchip: rkisp1: remove unused irq variable Heiko Stuebner
2021-06-18 13:02 ` [PATCH v6 02/10] dt-bindings: media: rkisp1: fix pclk clock-name Heiko Stuebner
2021-07-12 20:04 ` Rob Herring
2021-06-18 13:02 ` [PATCH v6 03/10] dt-bindings: media: rkisp1: document different irq possibilities Heiko Stuebner
2021-07-12 20:05 ` Rob Herring
2021-06-18 13:02 ` [PATCH v6 04/10] media: rockchip: rkisp1: allow separate interrupts Heiko Stuebner
2021-06-18 13:02 ` [PATCH v6 05/10] media: rockchip: rkisp1: make some isp-param functions variable Heiko Stuebner
2021-06-20 7:21 ` Dafna Hirschfeld
2021-07-12 20:43 ` Laurent Pinchart
2021-06-18 13:02 ` [PATCH v6 06/10] media: rockchip: rkisp1: make some isp-stats " Heiko Stuebner
2021-06-20 7:22 ` Dafna Hirschfeld
2021-07-12 20:44 ` Laurent Pinchart
2021-06-18 13:02 ` [PATCH v6 07/10] media: rockchip: rkisp1: add prefixes for v10 specific parts Heiko Stuebner
2021-06-18 13:02 ` [PATCH v6 08/10] media: rockchip: rkisp1: add support for v12 isp variants Heiko Stuebner
2021-06-20 7:26 ` Dafna Hirschfeld
2021-07-12 20:47 ` Laurent Pinchart
2021-06-18 13:02 ` [PATCH v6 09/10] dt-bindings: media: rkisp1: document px30 isp compatible Heiko Stuebner
2021-07-12 20:06 ` Rob Herring
2021-06-18 13:02 ` [PATCH v6 10/10] media: rockchip: rkisp1: add support for px30 isp version Heiko Stuebner
2021-07-12 20:40 ` [PATCH v6 0/7] rkisp1 support for px30 Laurent Pinchart
2021-07-12 20:46 ` Heiko Stübner [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=10918018.2OtUDhi4od@diego \
--to=heiko@sntech.de \
--cc=dafna.hirschfeld@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=ezequiel@collabora.com \
--cc=helen.koike@collabora.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).