Re: [PATCH 4/5] arm64: dts: qcom: add IPQ9650 SoC and rdp488 board support

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 4/15/26 3:33 PM, Kathiravan Thirumoorthy wrote:
> Add initial device tree support for the Qualcomm IPQ9650 SoC and
> rdp488 board.
> 
> Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
> ---

Overall looks good, just a couple comments

[...]

> +		CPU0: cpu@0 {

Labels should be lowercase

> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0>;
> +			enable-method = "psci";
> +			next-level-cache = <&l2_0>;

You likely want to add #cooling-cells = <2> 

[...]

> +	pmu-a55 {
> +		compatible = "arm,cortex-a55-pmu";
> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;

You'll need to do something like:

9ce52e908bd5 ("arm64: dts: qcom: sm8650: switch to interrupt-cells 4 to add PPI partitions")
2c06e0797c32 ("arm64: dts: qcom: sm8650: add PPI interrupt partitions for the ARM PMUs")

[...]

> +			uart1: serial@1a98000 {
> +				compatible = "qcom,geni-debug-uart";
> +				reg = <0x0 0x01a98000 0x0 0x4000>;
> +				clocks = <&gcc GCC_QUPV3_WRAP_SE6_CLK>;
> +				clock-names = "se";
> +				interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";

nit: please keep a \n above status

Konrad