Re: [PATCH v3 3/5] dt-bindings: media: Add CAMSS device for Hawi and Maili

[Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>]

On 10/30/2026 9:38 PM, Loic Poulain wrote:
> On Fri, Oct 30, 2026 at 1:43 PM Nihal Kumar Gupta
> <nihal.gupta@oss.qualcomm.com> wrote:
>>
>> From: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
>>
>> Add bindings for Camera Subsystem (CAMSS) on the Qualcomm Hawi platform.
>>
>> The Hawi platform provides:
>> - 6 x CSIPHY (CSI Physical Layer)
>> - 3 x TPG (Test Pattern Generator)
>> - 3 x CSID (CSI Decoder)
>> - 2 x CSID Lite
>> - 3 x VFE (Video Front End), 5 RDI per VFE
>> - 2 x VFE Lite, 4 RDI per VFE Lite
>>
>> Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
>> Co-developed-by: Nihal Kumar Gupta <nihal.gupta@oss.qualcomm.com>
>> Signed-off-by: Nihal Kumar Gupta <nihal.gupta@oss.qualcomm.com>

[...]

>> +examples:
>> +  - |
>> +    #include <dt-bindings/clock/qcom,hawi-gcc.h>
>> +    #include <dt-bindings/clock/qcom,hawi-camcc.h>
>> +    #include <dt-bindings/interconnect/qcom,icc.h>
>> +    #include <dt-bindings/interconnect/qcom,hawi-rpmh.h>
>> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +    #include <dt-bindings/power/qcom,rpmhpd.h>
>> +
>> +    soc {
>> +        #address-cells = <2>;
>> +        #size-cells = <2>;
>> +
>> +        isp@9253000 {
> 
> Address should match your first reg addr.
> 

Ack, thanks. Missed updating the binding accordingly. Will fix it in the 
next revision.

---
Best Regards,
Hangxiang