From: "Heiko Stübner" <heiko@sntech.de>
To: Wadim Egorov <w.egorov@phytec.de>
Cc: robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/3] ARM: dts: rockchip: Add support for phyCORE-RK3288 SoM
Date: Thu, 06 Apr 2017 10:47:57 +0200 [thread overview]
Message-ID: <11932726.5xfcEjvM7n@diego> (raw)
In-Reply-To: <1872284.4EEa8KbvLF@phil>
Am Donnerstag, 6. April 2017, 10:30:46 CEST schrieb Heiko Stuebner:
> Am Montag, 3. April 2017, 12:23:03 CEST schrieb Wadim Egorov:
> > The phyCORE-RK3288 is a SoM (System on Module) containing a RK3288 SoC.
> > The module can be connected to different carrier boards.
> > It can be also equipped with different RAM, SPI flash and eMMC variants.
> >
> > The Rapid Development Kit option is using the following setup:
> > - 1 GB DDR3 RAM (2 Banks)
> > - 1x 4 KB EEPROM
> > - DP83867 Gigabit Ethernet PHY
> > - 16 MB SPI Flash
> > - 4 GB eMMC Flash
> >
> > Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
>
> applied for 4.12 with the following minor changes:
had to unapply again ... can you please check the license of the files
They're currently GPL2-only, while we use a combined GPL+X11 license
everywhere else. See every other Rockchip dts (and even most other
socs) for reference.
Thanks
Heiko
prev parent reply other threads:[~2017-04-06 8:47 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-03 10:23 [PATCH 1/3] ARM: dts: rockchip: Add support for phyCORE-RK3288 SoM Wadim Egorov
2017-04-03 10:23 ` [PATCH 2/3] ARM: dts: rockchip: Add support for PCM-947 carrier board Wadim Egorov
[not found] ` <1491214985-18331-1-git-send-email-w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
2017-04-03 10:23 ` [PATCH 3/3] dt-bindings: Document Phytec phyCORE-RK3288 RDK Wadim Egorov
2017-04-06 8:30 ` [PATCH 1/3] ARM: dts: rockchip: Add support for phyCORE-RK3288 SoM Heiko Stuebner
2017-04-06 8:47 ` Heiko Stübner [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11932726.5xfcEjvM7n@diego \
--to=heiko@sntech.de \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=w.egorov@phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).