Re: "status" property checks

[Hollis Blanchard <hollis_blanchard-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>]

On Sat, 2010-01-09 at 10:46 +1100, David Gibson wrote:
> On Fri, Jan 08, 2010 at 11:45:28AM -0800, Hollis Blanchard wrote:
> > On Fri, 2010-01-08 at 13:28 -0600, Scott Wood wrote:
> > > Hollis Blanchard wrote:
> > > > On Thu, 2010-01-07 at 20:35 -0600, Hunter Cobbs wrote:
> > > >> I think that is definitely a solution.  It does centralize the testing
> > > >> for this particular issue.  The only thing question I have is if its
> > > >> really better to have the upper level do the check.  Shouldn't the
> > > >> driver itself handle the hardware and device node status?
> > > > 
> > > > Practically speaking, all drivers doing the checks today just return
> > > > -ENODEV. They don't try to do anything to "handle" the situation.
> > > > 
> > > > The definition of the status property implies it's outside of software's
> > > > control, for example:
> > > >         "disabled"
> > > >         "Indicates that the device is not presently operational, but it
> > > >         might become operational in the future (for example, something
> > > >         is not plugged in, or switched off)."
> > > > 
> > > > If a device is "not operational" in this sense, I don't think there's
> > > > anything for a device driver to do.
> > > 
> > > I could see situations where there is some software action that could 
> > > enable the device (e.g. multiple devices sharing pins, where only one 
> > > can be active at a time) -- but it's likely to not be the driver itself 
> > > that knows how to do that.
> > > 
> > > If the need arises, there could be a mechanism where the enabling entity 
> > > can tell the platform bus that it has enabled a previously-disabled 
> > > device, overriding the status in the device tree (and likewise if it 
> > > wants take down a device that was previously enabled).
> > 
> > OK, that makes sense to me. I'll put together a patch for the original
> > idea, and the enable/disable part can come later as needed.
> 
> Sounds good to me to.  Only thing I'd add, is that I'd also suggest a
> helper function to do an explicit check on the status property (or do
> we have that already?).  This could be useful for drivers which are
> bound primarily to one device tree node, but also need to (possibly
> optionally) check/use some other node.

of_device_is_available() exists and is used already, so I think we're OK
there.

-- 
Hollis Blanchard
Mentor Graphics, Embedded Systems Division