From: Anatolij Gustschin <agust-ynQEQJNshbs@public.gmane.org>
To: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH] of/mtd: nand: fix build breakage in drivers
Date: Thu, 3 Jun 2010 02:37:17 +0200 [thread overview]
Message-ID: <1275525437-364-1-git-send-email-agust@denx.de> (raw)
Fixes build errors in drivers caused by the OF device_node
pointer being moved into struct device
Signed-off-by: Anatolij Gustschin <agust-ynQEQJNshbs@public.gmane.org>
---
drivers/mtd/nand/fsl_upm.c | 17 +++++++++--------
drivers/mtd/nand/socrates_nand.c | 4 ++--
2 files changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index 00aea6f..1312eda 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -232,7 +232,7 @@ static int __devinit fun_probe(struct of_device *ofdev,
if (!fun)
return -ENOMEM;
- ret = of_address_to_resource(ofdev->node, 0, &io_res);
+ ret = of_address_to_resource(ofdev->dev.of_node, 0, &io_res);
if (ret) {
dev_err(&ofdev->dev, "can't get IO base\n");
goto err1;
@@ -244,7 +244,8 @@ static int __devinit fun_probe(struct of_device *ofdev,
goto err1;
}
- prop = of_get_property(ofdev->node, "fsl,upm-addr-offset", &size);
+ prop = of_get_property(ofdev->dev.of_node, "fsl,upm-addr-offset",
+ &size);
if (!prop || size != sizeof(uint32_t)) {
dev_err(&ofdev->dev, "can't get UPM address offset\n");
ret = -EINVAL;
@@ -252,7 +253,7 @@ static int __devinit fun_probe(struct of_device *ofdev,
}
fun->upm_addr_offset = *prop;
- prop = of_get_property(ofdev->node, "fsl,upm-cmd-offset", &size);
+ prop = of_get_property(ofdev->dev.of_node, "fsl,upm-cmd-offset", &size);
if (!prop || size != sizeof(uint32_t)) {
dev_err(&ofdev->dev, "can't get UPM command offset\n");
ret = -EINVAL;
@@ -260,7 +261,7 @@ static int __devinit fun_probe(struct of_device *ofdev,
}
fun->upm_cmd_offset = *prop;
- prop = of_get_property(ofdev->node,
+ prop = of_get_property(ofdev->dev.of_node,
"fsl,upm-addr-line-cs-offsets", &size);
if (prop && (size / sizeof(uint32_t)) > 0) {
fun->mchip_count = size / sizeof(uint32_t);
@@ -276,7 +277,7 @@ static int __devinit fun_probe(struct of_device *ofdev,
for (i = 0; i < fun->mchip_count; i++) {
fun->rnb_gpio[i] = -1;
- rnb_gpio = of_get_gpio(ofdev->node, i);
+ rnb_gpio = of_get_gpio(ofdev->dev.of_node, i);
if (rnb_gpio >= 0) {
ret = gpio_request(rnb_gpio, dev_name(&ofdev->dev));
if (ret) {
@@ -292,13 +293,13 @@ static int __devinit fun_probe(struct of_device *ofdev,
}
}
- prop = of_get_property(ofdev->node, "chip-delay", NULL);
+ prop = of_get_property(ofdev->dev.of_node, "chip-delay", NULL);
if (prop)
fun->chip_delay = *prop;
else
fun->chip_delay = 50;
- prop = of_get_property(ofdev->node, "fsl,upm-wait-flags", &size);
+ prop = of_get_property(ofdev->dev.of_node, "fsl,upm-wait-flags", &size);
if (prop && size == sizeof(uint32_t))
fun->wait_flags = *prop;
else
@@ -315,7 +316,7 @@ static int __devinit fun_probe(struct of_device *ofdev,
fun->dev = &ofdev->dev;
fun->last_ctrl = NAND_CLE;
- ret = fun_chip_init(fun, ofdev->node, &io_res);
+ ret = fun_chip_init(fun, ofdev->dev.of_node, &io_res);
if (ret)
goto err2;
diff --git a/drivers/mtd/nand/socrates_nand.c b/drivers/mtd/nand/socrates_nand.c
index 884852d..cc728b1 100644
--- a/drivers/mtd/nand/socrates_nand.c
+++ b/drivers/mtd/nand/socrates_nand.c
@@ -183,7 +183,7 @@ static int __devinit socrates_nand_probe(struct of_device *ofdev,
return -ENOMEM;
}
- host->io_base = of_iomap(ofdev->node, 0);
+ host->io_base = of_iomap(ofdev->dev.of_node, 0);
if (host->io_base == NULL) {
printk(KERN_ERR "socrates_nand: ioremap failed\n");
kfree(host);
@@ -244,7 +244,7 @@ static int __devinit socrates_nand_probe(struct of_device *ofdev,
#ifdef CONFIG_MTD_OF_PARTS
if (num_partitions == 0) {
num_partitions = of_mtd_parse_partitions(&ofdev->dev,
- ofdev->node,
+ ofdev->dev.of_node,
&partitions);
if (num_partitions < 0) {
res = num_partitions;
--
1.7.0.4
reply other threads:[~2010-06-03 0:37 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1275525437-364-1-git-send-email-agust@denx.de \
--to=agust-ynqeqjnshbs@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
--cc=linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox