Hi,

Am Freitag, 12. Dezember 2025, 18:02:32 CET schrieb Frank Li:
> On Fri, Dec 12, 2025 at 09:58:59AM +0100, Alexander Stein wrote:
> > The GPC power controller is an interrupt controllers and can be referenced
> > in interrupt-map properties, e.g. PCIe controller, thus the node should
> > have address-cells property.
> >
> > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> 
> Strange, there are not #address-cells property for gic if there are not
> ITS node. gic is widely used.
> 
> Does gic node also missed #address-cells?

Yes and no.
Yes: see commit faf183a02ed6b ("arm64: dts: imx8mp: Add default GIC address cells")
No: AFAICS this is only necessary if an interrupt-controller is referenced
from within interrupt-map. But on imx6qdl.dtsi 'intc' (GIC) is not used that way.

Best regards,
Alexander

> 
> Frank
> 
> > ---
> >  Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml | 3 +++
> >  1 file changed, 3 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml
> > index 9de3fe73c1eb6..d49a5130b87c7 100644
> > --- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml
> > +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml
> > @@ -38,6 +38,9 @@ properties:
> >    reg:
> >      maxItems: 1
> >
> > +  "#address-cells":
> > +    const: 0
> > +
> >    interrupts:
> >      maxItems: 1
> >
> > --
> > 2.43.0
> >
> 


-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/