[PATCH 1/2] phylib: Use common page register definition for Marvell PHYs.

Devicetree
 help / color / mirror / Atom feed

From: David Daney <ddaney-M3mlKVOIwJVv6pq1l3V1OdBPR1lH4CV8@public.gmane.org>
To: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
	grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: David Daney
	<ddaney-M3mlKVOIwJVv6pq1l3V1OdBPR1lH4CV8@public.gmane.org>,
	Arnaud Patard
	<arnaud.patard-dQbF7i+pzddAfugRpC6u6w@public.gmane.org>,
	Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org>
Subject: [PATCH 1/2] phylib: Use common page register definition for Marvell PHYs.
Date: Fri, 19 Nov 2010 13:58:52 -0800	[thread overview]
Message-ID: <1290203933-28251-2-git-send-email-ddaney@caviumnetworks.com> (raw)
In-Reply-To: <1290203933-28251-1-git-send-email-ddaney-M3mlKVOIwJVv6pq1l3V1OdBPR1lH4CV8@public.gmane.org>

The definition of the Marvell PHY page register is not specific to
88E1121, so rename the macro to MII_MARVELL_PHY_PAGE, and use it
throughout.

Suggested-by: Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org>
Signed-off-by: David Daney <ddaney-M3mlKVOIwJVv6pq1l3V1OdBPR1lH4CV8@public.gmane.org>
Cc: Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org>
Cc: Arnaud Patard <arnaud.patard-dQbF7i+pzddAfugRpC6u6w@public.gmane.org>
Cc: Benjamin Herrenschmidt <benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>
---
 drivers/net/phy/marvell.c |   27 ++++++++++++++-------------
 1 files changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index f0bd1a1..3600b8b 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -35,6 +35,8 @@
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 
+#define MII_MARVELL_PHY_PAGE		22
+
 #define MII_M1011_IEVENT		0x13
 #define MII_M1011_IEVENT_CLEAR		0x0000
 
@@ -80,7 +82,6 @@
 #define MII_88E1121_PHY_LED_CTRL	16
 #define MII_88E1121_PHY_LED_PAGE	3
 #define MII_88E1121_PHY_LED_DEF		0x0030
-#define MII_88E1121_PHY_PAGE		22
 
 #define MII_M1011_PHY_STATUS		0x11
 #define MII_M1011_PHY_STATUS_1000	0x8000
@@ -190,9 +191,9 @@ static int m88e1121_config_aneg(struct phy_device *phydev)
 {
 	int err, oldpage, mscr;
 
-	oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE);
+	oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
 
-	err = phy_write(phydev, MII_88E1121_PHY_PAGE,
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
 			MII_88E1121_PHY_MSCR_PAGE);
 	if (err < 0)
 		return err;
@@ -218,7 +219,7 @@ static int m88e1121_config_aneg(struct phy_device *phydev)
 			return err;
 	}
 
-	phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage);
+	phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
 
 	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
 	if (err < 0)
@@ -229,11 +230,11 @@ static int m88e1121_config_aneg(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
-	oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE);
+	oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
 
-	phy_write(phydev, MII_88E1121_PHY_PAGE, MII_88E1121_PHY_LED_PAGE);
+	phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_LED_PAGE);
 	phy_write(phydev, MII_88E1121_PHY_LED_CTRL, MII_88E1121_PHY_LED_DEF);
-	phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage);
+	phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
 
 	err = genphy_config_aneg(phydev);
 
@@ -244,9 +245,9 @@ static int m88e1318_config_aneg(struct phy_device *phydev)
 {
 	int err, oldpage, mscr;
 
-	oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE);
+	oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
 
-	err = phy_write(phydev, MII_88E1121_PHY_PAGE,
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
 			MII_88E1121_PHY_MSCR_PAGE);
 	if (err < 0)
 		return err;
@@ -258,7 +259,7 @@ static int m88e1318_config_aneg(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
-	err = phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage);
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
 	if (err < 0)
 		return err;
 
@@ -398,7 +399,7 @@ static int m88e1118_config_init(struct phy_device *phydev)
 	int err;
 
 	/* Change address */
-	err = phy_write(phydev, 0x16, 0x0002);
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002);
 	if (err < 0)
 		return err;
 
@@ -408,7 +409,7 @@ static int m88e1118_config_init(struct phy_device *phydev)
 		return err;
 
 	/* Change address */
-	err = phy_write(phydev, 0x16, 0x0003);
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0003);
 	if (err < 0)
 		return err;
 
@@ -421,7 +422,7 @@ static int m88e1118_config_init(struct phy_device *phydev)
 		return err;
 
 	/* Reset address */
-	err = phy_write(phydev, 0x16, 0x0);
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0);
 	if (err < 0)
 		return err;
 
-- 
1.7.2.3

next prev parent reply	other threads:[~2010-11-19 21:58 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-11-19 21:58 [PATCH 0/2] phylib: Cleanup marvell.c and add 88E1149R support David Daney
     [not found] ` <1290203933-28251-1-git-send-email-ddaney-M3mlKVOIwJVv6pq1l3V1OdBPR1lH4CV8@public.gmane.org>
2010-11-19 21:58   ` David Daney [this message]
2010-11-19 21:58   ` [PATCH 2/2] phylib: Add support for Marvell 88E1149R devices David Daney
2010-11-22 16:34   ` [PATCH 0/2] phylib: Cleanup marvell.c and add 88E1149R support David Miller

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:f0bd1a1 dfblob:3600b8b )
 OR (
bs:"[PATCH 1/2] phylib: Use common page register definition for Marvell PHYs." )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1290203933-28251-2-git-send-email-ddaney@caviumnetworks.com \
    --to=ddaney-m3mlkvoiwjvv6pq1l3v1odbpr1lh4cv8@public.gmane.org \
    --cc=arnaud.patard-dQbF7i+pzddAfugRpC6u6w@public.gmane.org \
    --cc=cyril-l0cyMroinI0@public.gmane.org \
    --cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
    --cc=grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox