From: Sebastian Andrzej Siewior <bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: sodaville-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org,
Sebastian Andrzej Siewior
<bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>,
x86-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Subject: [PATCH 08/15] x86/dtb: add support for PCI devices backed by dtb nodes
Date: Fri, 17 Dec 2010 16:33:46 +0100 [thread overview]
Message-ID: <1292600033-12271-9-git-send-email-bigeasy@linutronix.de> (raw)
In-Reply-To: <1292600033-12271-1-git-send-email-bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
x86_of_pci_init() does two things:
- it provides a generic irq enable and disable function. enable queries
the device tree for the interrupt information, calls ->xlate on the
irq host and updates the pci->irq information for the device.
- it walks through PCI buss(es) in the device tree and adds its children
(devices) nodes to appropriate pci_dev nodes in kernel. So the dtb
node information is available at probe time of the PCI device.
Adding a PCI bus based on the information in the device tree is
currently not supported. Right now direct access via ioports is used.
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Tested-by: Dirk Brandewie <dirk.brandewie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
---
arch/x86/include/asm/prom.h | 17 +++++++++
arch/x86/kernel/prom.c | 80 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 97 insertions(+), 0 deletions(-)
diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h
index 3bc8ed5..9f7484e 100644
--- a/arch/x86/include/asm/prom.h
+++ b/arch/x86/include/asm/prom.h
@@ -16,6 +16,7 @@
#include <linux/of.h>
#include <linux/types.h>
+#include <linux/pci.h>
#include <asm/irq.h>
#include <asm/atomic.h>
#include <asm/setup.h>
@@ -28,8 +29,24 @@ extern void add_dtb(u64 data);
void x86_dtb_find_config(void);
void x86_dtb_get_config(unsigned int unused);
void add_interrupt_host(struct irq_domain *ih);
+void __cpuinit x86_of_pci_init(void);
+
+static inline struct device_node *pci_device_to_OF_node(struct pci_dev *pdev)
+{
+ return pdev->dev.of_node;
+}
+
+static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
+{
+ if (bus->self)
+ return pci_device_to_OF_node(bus->self);
+ else
+ return NULL;
+}
+
#else
static inline void add_dtb(u64 data) { }
+static inline void x86_of_pci_init(void) { }
#define x86_dtb_find_config x86_init_noop
#define x86_dtb_get_config x86_init_uint_noop
#define of_ioapic 0
diff --git a/arch/x86/kernel/prom.c b/arch/x86/kernel/prom.c
index 40ad8c0..a449dc6 100644
--- a/arch/x86/kernel/prom.c
+++ b/arch/x86/kernel/prom.c
@@ -9,10 +9,13 @@
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/of_pci.h>
#include <asm/hpet.h>
#include <asm/irq_controller.h>
#include <asm/io_apic.h>
+#include <asm/pci_x86.h>
__initdata u64 initial_dtb;
char __initdata cmd_line[COMMAND_LINE_SIZE];
@@ -102,6 +105,83 @@ void __init add_dtb(u64 data)
initial_dtb = data + offsetof(struct setup_data, data);
}
+static int x86_of_pci_irq_enable(struct pci_dev *dev)
+{
+ struct of_irq oirq;
+ u32 virq;
+ int ret;
+ u8 pin;
+
+ ret = pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+ if (ret)
+ return ret;
+ if (!pin)
+ return 0;
+
+ ret = of_irq_map_pci(dev, &oirq);
+ if (ret)
+ return ret;
+
+ virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+ oirq.size);
+ if (virq == NO_IRQ)
+ return -EINVAL;
+ dev->irq = virq;
+ return 0;
+}
+
+static void x86_of_pci_irq_disable(struct pci_dev *dev)
+{
+}
+
+void __cpuinit x86_of_pci_init(void)
+{
+ struct device_node *np;
+
+ pcibios_enable_irq = x86_of_pci_irq_enable;
+ pcibios_disable_irq = x86_of_pci_irq_disable;
+
+ for_each_node_by_type(np, "pci") {
+ const void *prop;
+ struct pci_bus *bus;
+ unsigned int bus_min;
+ struct device_node *child;
+
+ prop = of_get_property(np, "bus-range", NULL);
+ if (!prop)
+ continue;
+ bus_min = be32_to_cpup(prop);
+
+ bus = pci_find_bus(0, bus_min);
+ if (!bus) {
+ printk(KERN_ERR "Can't find a node for bus %s.\n",
+ np->full_name);
+ continue;
+ }
+
+ if (bus->self)
+ bus->self->dev.of_node = np;
+ else
+ bus->dev.of_node = np;
+
+ for_each_child_of_node(np, child) {
+ struct pci_dev *dev;
+ u32 devfn;
+
+ prop = of_get_property(child, "reg", NULL);
+ if (!prop)
+ continue;
+
+ devfn = (be32_to_cpup(prop) >> 8) & 0xff;
+ dev = pci_get_slot(bus, devfn);
+ if (!dev)
+ continue;
+ dev->dev.of_node = child;
+ pci_dev_put(dev);
+ }
+ }
+}
+
static void __init dtb_setup_hpet(void)
{
struct device_node *dn;
--
1.7.3.2
next prev parent reply other threads:[~2010-12-17 15:33 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1292600033-12271-1-git-send-email-bigeasy@linutronix.de>
[not found] ` <1292600033-12271-1-git-send-email-bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2010-12-17 15:33 ` [PATCH 02/15] x86: Add device tree support Sebastian Andrzej Siewior
2010-12-30 8:43 ` Grant Likely
[not found] ` <20101230084311.GD11721-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2010-12-30 21:01 ` Grant Likely
[not found] ` <AANLkTi=EFewaizO=1FLALE0eQPUmaFPfTmgoeF+JRpkt-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-01-02 0:40 ` H. Peter Anvin
2011-01-03 12:20 ` Sebastian Andrzej Siewior
2011-01-03 18:05 ` [sodaville] " H. Peter Anvin
2010-12-17 15:33 ` [PATCH 03/15] x86/dtb: Add a device tree for CE4100 Sebastian Andrzej Siewior
[not found] ` <1292600033-12271-4-git-send-email-bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2010-12-30 8:51 ` Grant Likely
[not found] ` <20101230085122.GE11721-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2011-01-03 11:28 ` Sebastian Andrzej Siewior
2011-01-03 17:45 ` Grant Likely
[not found] ` <20110103174500.GC2522-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2011-01-05 9:48 ` [PATCH v2 " Sebastian Andrzej Siewior
2011-01-05 10:01 ` [PATCH " Sebastian Andrzej Siewior
2011-01-05 23:20 ` David Gibson
2010-12-17 15:33 ` [PATCH 04/15] x86/dtb: add irq domain abstraction Sebastian Andrzej Siewior
2011-01-11 22:03 ` Grant Likely
[not found] ` <20110111220317.GA2131-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2011-01-23 13:06 ` Sebastian Andrzej Siewior
2010-12-17 15:33 ` [PATCH 05/15] x86/dtb: add early parsing of APIC and IO APIC Sebastian Andrzej Siewior
[not found] ` <1292600033-12271-6-git-send-email-bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2010-12-30 8:54 ` Grant Likely
2011-01-04 13:23 ` [PATCH v2 " Sebastian Andrzej Siewior
[not found] ` <20110104132302.GB21359-Hfxr4Dq0UpYb1SvskN2V4Q@public.gmane.org>
2011-01-11 22:14 ` Grant Likely
[not found] ` <20110111221401.GB2131-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2011-01-18 14:56 ` Sebastian Andrzej Siewior
2010-12-17 15:33 ` [PATCH 06/15] x86/dtb: add support hpet Sebastian Andrzej Siewior
[not found] ` <1292600033-12271-7-git-send-email-bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2011-01-11 22:26 ` Grant Likely
2010-12-17 15:33 ` [PATCH 07/15] of: move of_irq_map_pci() into generic code Sebastian Andrzej Siewior
2010-12-17 21:16 ` Benjamin Herrenschmidt
2011-01-04 14:27 ` [PATCH v2 " Sebastian Andrzej Siewior
[not found] ` <20110104142754.GD21359-Hfxr4Dq0UpYb1SvskN2V4Q@public.gmane.org>
2011-01-11 23:27 ` Grant Likely
[not found] ` <20110111232726.GD2131-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2011-01-12 18:21 ` Sebastian Andrzej Siewior
2010-12-17 15:33 ` Sebastian Andrzej Siewior [this message]
[not found] ` <1292600033-12271-9-git-send-email-bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2011-01-11 23:47 ` [PATCH 08/15] x86/dtb: add support for PCI devices backed by dtb nodes Grant Likely
2010-12-17 15:33 ` [PATCH 09/15] x86/dtb: Add generic bus probe Sebastian Andrzej Siewior
[not found] ` <1292600033-12271-10-git-send-email-bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2011-01-11 23:48 ` Grant Likely
2010-12-17 15:33 ` [PATCH 10/15] x86/ioapic: Add OF bindings for IO-APIC Sebastian Andrzej Siewior
[not found] ` <1292600033-12271-11-git-send-email-bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2011-01-11 23:53 ` Grant Likely
[not found] ` <20110111235353.GG2131-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2011-01-12 17:07 ` Sebastian Andrzej Siewior
[not found] ` <20110112170707.GA6907-Hfxr4Dq0UpYb1SvskN2V4Q@public.gmane.org>
2011-01-12 17:19 ` [sodaville] " H. Peter Anvin
[not found] ` <4D2DE2B9.2000607-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2011-01-13 10:38 ` Sebastian Andrzej Siewior
2010-12-17 15:33 ` [PATCH 12/15] of/address: use propper endianess in get_flags Sebastian Andrzej Siewior
2010-12-30 9:05 ` Grant Likely
2010-12-17 15:33 ` [PATCH 14/15] rtc/cmos: add OF bindings Sebastian Andrzej Siewior
[not found] ` <1292600033-12271-15-git-send-email-bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2011-01-12 0:04 ` Grant Likely
[not found] ` <20110112000442.GJ2131-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2011-01-13 10:50 ` [PATCH v2] " Sebastian Andrzej Siewior
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1292600033-12271-9-git-send-email-bigeasy@linutronix.de \
--to=bigeasy-hfztesqfncyowbw4kg4ksq@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=sodaville-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org \
--cc=x86-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).