From: Jason Liu <r64343-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
To: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Cc: linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org,
patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Subject: [PATCH 0/3] Add MX51 basic DT support
Date: Fri, 18 Feb 2011 16:12:07 +0800 [thread overview]
Message-ID: <1298016730-22761-1-git-send-email-r64343@freescale.com> (raw)
This patchset adds FSL mx51 device tree support. This
is based on
git://git.secretlab.ca/git/linux-2.6 devicetree/test
This patch has been tested on MX51 babbage board and can
boot up succesfully to linux console with DT enabled.
Jason Liu (3):
arm/dt: add basic mx51 device tree support
arm/dt: add very basic dts file for babbage board
serial/imx: parse from device tree support
arch/arm/boot/dts/babbage.dts | 117 +++++++++++++++++++++++++++++++
arch/arm/mach-mx5/Kconfig | 6 ++
arch/arm/mach-mx5/Makefile | 1 +
arch/arm/mach-mx5/board-dt.c | 64 +++++++++++++++++
arch/arm/mach-mx5/clock-mx51-mx53.c | 45 ++++++++++++-
arch/arm/plat-mxc/include/mach/common.h | 1 +
drivers/tty/serial/imx.c | 81 +++++++++++++++++++---
7 files changed, 304 insertions(+), 11 deletions(-)
create mode 100644 arch/arm/boot/dts/babbage.dts
create mode 100644 arch/arm/mach-mx5/board-dt.c
mode change 100644 => 100755 drivers/tty/serial/imx.c
next reply other threads:[~2011-02-18 8:12 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-18 8:12 Jason Liu [this message]
[not found] ` <1298016730-22761-1-git-send-email-r64343-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2011-02-18 8:12 ` [PATCH 1/3] arm/dt: add basic mx51 device tree support Jason Liu
[not found] ` <1298016730-22761-2-git-send-email-r64343-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2011-02-21 8:37 ` Shawn Guo
2011-02-28 6:48 ` Shawn Guo
[not found] ` <AANLkTi=v4X6XU9VUOVyr1MYZVsBeF494MBP3aeoZc4y6-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-03-07 5:05 ` Jason Hui
2011-02-18 8:12 ` [PATCH 2/3] arm/dt: add very basic dts file for babbage board Jason Liu
[not found] ` <1298016730-22761-3-git-send-email-r64343-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2011-02-21 9:46 ` Shawn Guo
[not found] ` <AANLkTikerADxGGRfnumWMN+s2r8gWOb1UAaS3tQ6DTe5-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-02-21 17:10 ` Grant Likely
[not found] ` <AANLkTi=kxbzDCJqOnPNjCsNxMsLtcbbcGLfZbY05_Svh-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-02-22 14:13 ` Shawn Guo
[not found] ` <20110222141309.GH19871-+NayF8gZjK2ctlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2011-02-23 18:59 ` Grant Likely
2011-02-28 14:32 ` Shawn Guo
[not found] ` <20110228143159.GA3688-+NayF8gZjK2ctlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2011-02-28 18:09 ` Grant Likely
[not found] ` <20110228180917.GG13690-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2011-03-07 5:06 ` Jason Hui
2011-02-26 14:30 ` Shawn Guo
2011-02-18 8:12 ` [PATCH 3/3] serial/imx: parse from device tree support Jason Liu
[not found] ` <1298016730-22761-4-git-send-email-r64343-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2011-02-18 8:34 ` Arnd Bergmann
2011-02-28 10:35 ` Shawn Guo
[not found] ` <AANLkTind79cPhBoSbGZsVodYRRk4dEQpr4G-Zf19yi7G-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-03-07 5:08 ` Jason Hui
2011-02-18 15:12 ` [PATCH 0/3] Add MX51 basic DT support Rob Herring
[not found] ` <4D5E8C74.4090004-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2011-02-21 2:10 ` Liu Hui-R64343
2011-02-21 8:17 ` Shawn Guo
[not found] ` <AANLkTinWF54qvgSc4MVjS4ONPb3upnwQ2YJzVxmePiH_-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-03-07 5:03 ` Jason Hui
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1298016730-22761-1-git-send-email-r64343@freescale.com \
--to=r64343-kzfg59tc24xl57midrcfdg@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org \
--cc=patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).