From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jason Liu Subject: [PATCH 0/3] Add MX51 basic DT support Date: Fri, 18 Feb 2011 16:12:07 +0800 Message-ID: <1298016730-22761-1-git-send-email-r64343@freescale.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linaro-dev-bounces-cunTk1MwBs8s++Sfvej+rw@public.gmane.org Errors-To: linaro-dev-bounces-cunTk1MwBs8s++Sfvej+rw@public.gmane.org To: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org Cc: linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org, patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org List-Id: devicetree@vger.kernel.org This patchset adds FSL mx51 device tree support. This is based on git://git.secretlab.ca/git/linux-2.6 devicetree/test This patch has been tested on MX51 babbage board and can boot up succesfully to linux console with DT enabled. Jason Liu (3): arm/dt: add basic mx51 device tree support arm/dt: add very basic dts file for babbage board serial/imx: parse from device tree support arch/arm/boot/dts/babbage.dts | 117 +++++++++++++++++++++++++++++++ arch/arm/mach-mx5/Kconfig | 6 ++ arch/arm/mach-mx5/Makefile | 1 + arch/arm/mach-mx5/board-dt.c | 64 +++++++++++++++++ arch/arm/mach-mx5/clock-mx51-mx53.c | 45 ++++++++++++- arch/arm/plat-mxc/include/mach/common.h | 1 + drivers/tty/serial/imx.c | 81 +++++++++++++++++++--- 7 files changed, 304 insertions(+), 11 deletions(-) create mode 100644 arch/arm/boot/dts/babbage.dts create mode 100644 arch/arm/mach-mx5/board-dt.c mode change 100644 => 100755 drivers/tty/serial/imx.c