From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jason Liu Subject: [PATCH V2 2/3] arm/dt: add very basic dts file for babbage board Date: Mon, 7 Mar 2011 21:05:59 +0800 Message-ID: <1299503160-9910-3-git-send-email-jason.hui@linaro.org> References: <1299503160-9910-1-git-send-email-jason.hui@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1299503160-9910-1-git-send-email-jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: devicetree-discuss-bounces+gldd-devicetree-discuss=m.gmane.org-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org Sender: devicetree-discuss-bounces+gldd-devicetree-discuss=m.gmane.org-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org To: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org Cc: grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org, patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org List-Id: devicetree@vger.kernel.org Signed-off-by: Jason Liu Singed-off-by: Rob Herring --- arch/arm/boot/dts/babbage.dts | 110 +++++++++++++++++++++++++++++++++++++++++ 1 files changed, 110 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/babbage.dts b/arch/arm/boot/dts/babbage.dts new file mode 100644 index 0000000..46a3071 --- /dev/null +++ b/arch/arm/boot/dts/babbage.dts @@ -0,0 +1,110 @@ +/dts-v1/; + +/ { + model = "Freescale i.MX51 Babbage"; + compatible = "fsl,mx51-babbage"; + #address-cells = <0x1>; + #size-cells = <0x1>; + #interrupt-cells = <0x1>; + interrupt-parent = <&tzic>; + + memory { + reg = <0x90000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttymxc1,115200n8 debug earlyprintk"; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + tzic: tzic@0 { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + reg = <0xe0000000 0x1000>; + compatible = "fsl,imx51-tzic"; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + uart0_clk: uart@0 { + compatible = "clock"; + clock-outputs = "imx-uart.0"; + }; + + uart1_clk: uart@1 { + compatible = "clock"; + clock-outputs = "imx-uart.1"; + }; + + uart2_clk: uart@2 { + compatible = "clock"; + clock-outputs = "imx-uart.2"; + }; + + fec_clk: fec@0 { + compatible = "clock"; + clock-outputs = "fec.0"; + }; + }; + + spba@70000000 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "simple-bus"; + ranges = <0x0 0x70000000 0x100000>; + + imx-uart@c000 { + compatible = "imx-uart"; + reg = <0xc000 0x1000>; + interrupts = <0x21>; + rts-cts; + uart-clock = <&uart2_clk>, "uart"; + }; + }; + + aips@73f00000 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "simple-bus"; + ranges = <0x0 0x73f00000 0x100000>; + + imx-uart@bc000 { + compatible = "imx-uart"; + reg = <0xbc000 0x1000>; + interrupts = <0x1f>; + rts-cts; + uart-clock = <&uart0_clk>, "uart"; + }; + + imx-uart@c0000 { + compatible = "imx-uart"; + reg = <0xc0000 0x1000>; + interrupts = <0x20>; + rts-cts; + uart-clock = <&uart1_clk>, "uart"; + }; + }; + + aips@83f00000 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "simple-bus"; + ranges = <0x0 0x83f00000 0x100000>; + + fec@ec000 { + compatible = "fec"; + reg = <0xec000 0x1000>; + interrupts = <0x57>; + fec_clk-clock = <&fec_clk>, "fec"; + }; + }; +}; -- 1.7.0.4