From: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Cc: patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Subject: [PATCH RFC 0/5] Dynamically add clk to clkdev per dt clock nodes
Date: Tue, 8 Mar 2011 00:22:07 +0800 [thread overview]
Message-ID: <1299514932-13558-1-git-send-email-shawn.guo@linaro.org> (raw)
Before translating all mx5 clocks from static adding way to dynamic
way, I would send this out for review and comment, so that I can turn
around in case that I'm on a wrong direction.
It's based on Jason's mx51-basic-dt-support patch set, and only adds
gpt and uart related clocks, but it's enough to get the system at
where Jason's patch can get.
[PATCH 1/5] arm/dts: babbage: add gpt and uart related clock nodes
[PATCH 2/5] arm/mxc: add clk members to ease dt clock support
[PATCH 3/5] arm/dt: mx51: dynamically add gpt and uart related clocks per dt nodes
[PATCH 4/5] arm/dt: mx5: change timer init function to dt clock way
[PATCH 5/5] of/clock: eliminate function __of_clk_get_from_provider
arch/arm/boot/dts/babbage.dts | 162 ++++++++++++-
arch/arm/mach-mx5/board-dt.c | 9 +-
arch/arm/mach-mx5/clock-mx51-mx53.c | 436 +++++++++++++++++++++++++++++++-
arch/arm/plat-mxc/include/mach/clock.h | 4 +
drivers/of/clock.c | 23 +--
drivers/tty/serial/imx.c | 79 +++++-
6 files changed, 661 insertions(+), 52 deletions(-)
Regards,
Shawn
next reply other threads:[~2011-03-07 16:22 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-07 16:22 Shawn Guo [this message]
[not found] ` <1299514932-13558-1-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-03-07 16:22 ` [PATCH 1/5] arm/dts: babbage: add gpt and uart related clock nodes Shawn Guo
[not found] ` <1299514932-13558-2-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-03-07 17:48 ` Grant Likely
[not found] ` <AANLkTimn4fNvM0bSHnpuQmCAweTZ00JQCZCZ=vOdV4NZ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-03-08 3:44 ` Shawn Guo
[not found] ` <20110308034447.GB14370-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2011-03-12 5:55 ` Shawn Guo
2011-03-13 8:08 ` Shawn Guo
2011-03-08 6:56 ` Jason Hui
[not found] ` <AANLkTima=zGr96dZUaYvCN6oE=KCY=ySOgOLweEJYk97-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-03-08 7:07 ` Shawn Guo
[not found] ` <20110308070716.GA16642-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2011-03-08 7:27 ` Jason Hui
2011-03-07 16:22 ` [PATCH 2/5] arm/mxc: add clk members to ease dt clock support Shawn Guo
[not found] ` <1299514932-13558-3-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-03-07 17:53 ` Grant Likely
[not found] ` <AANLkTikZsMxs1dXgBxVEar+MLF0j4ROZO+uTmo+OSF4s-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-03-08 3:56 ` Shawn Guo
[not found] ` <20110308035633.GD14370-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2011-03-13 15:19 ` Shawn Guo
2011-03-15 7:41 ` Grant Likely
[not found] ` <20110315074101.GH23050-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2011-03-15 7:50 ` Shawn Guo
[not found] ` <20110315075028.GG11098-+NayF8gZjK2ctlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2011-03-15 8:02 ` Grant Likely
[not found] ` <20110315080256.GM23050-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2011-03-15 8:05 ` Shawn Guo
2011-03-07 16:22 ` [PATCH 3/5] arm/dt: mx51: dynamically add gpt and uart related clocks per dt nodes Shawn Guo
[not found] ` <1299514932-13558-4-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-03-15 7:37 ` Grant Likely
[not found] ` <20110315073731.GG23050-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2011-03-16 12:04 ` Shawn Guo
[not found] ` <20110316120455.GA11658-+NayF8gZjK2ctlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2011-03-17 20:47 ` Grant Likely
[not found] ` <20110317204748.GJ12824-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2011-03-18 16:35 ` Shawn Guo
2011-03-07 16:22 ` [PATCH 4/5] arm/dt: mx5: change timer init function to dt clock way Shawn Guo
2011-03-07 16:22 ` [PATCH 5/5] of/clock: eliminate function __of_clk_get_from_provider Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1299514932-13558-1-git-send-email-shawn.guo@linaro.org \
--to=shawn.guo-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org \
--cc=patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).