From: Jason Liu <jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Cc: grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org,
patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Subject: [PATCH V3 3/5] serial/imx: parse from device tree support
Date: Wed, 9 Mar 2011 13:19:31 +0800 [thread overview]
Message-ID: <1299647973-21845-4-git-send-email-jason.hui@linaro.org> (raw)
In-Reply-To: <1299647973-21845-1-git-send-email-jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Jason Liu <r64343-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Signed-off-by: Jeremy Kerr <jeremy.kerr-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>
---
drivers/tty/serial/imx.c | 79 ++++++++++++++++++++++++++++++++++++++++------
1 files changed, 69 insertions(+), 10 deletions(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index dfcf4b1..c9483d1 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -53,6 +53,9 @@
#include <mach/hardware.h>
#include <mach/imx-uart.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
/* Register definitions */
#define URXD0 0x0 /* Receiver Register */
#define URTX0 0x40 /* Transmitter Register */
@@ -1224,6 +1227,53 @@ static int serial_imx_resume(struct platform_device *dev)
return 0;
}
+#ifdef CONFIG_OF
+static int serial_imx_probe_dt(struct imx_port *sport,
+ struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ static int line;
+
+ if (!node)
+ return -ENODEV;
+
+ if (of_get_property(node, "fsl,has-rts-cts", NULL))
+ sport->have_rtscts = 1;
+
+ if (of_get_property(node, "fsl,irda-mode", NULL))
+ sport->use_irda = 1;
+
+ sport->port.line = line++;
+
+ return 0;
+}
+#else
+static int serial_imx_probe_dt(struct imx_port *sport,
+ struct platform_device *pdev)
+{
+ return -ENODEV;
+}
+#endif
+
+static int serial_imx_probe_pdata(struct imx_port *sport,
+ struct platform_device *pdev)
+{
+ struct imxuart_platform_data *pdata = pdev->dev.platform_data;
+
+ if (!pdata)
+ return 0;
+
+ if (pdata->flags & IMXUART_HAVE_RTSCTS)
+ sport->have_rtscts = 1;
+
+#ifdef CONFIG_IRDA
+ if (pdata->flags & IMXUART_IRDA)
+ sport->use_irda = 1;
+#endif
+ sport->port.line = pdev->id;
+
+ return 0;
+}
static int serial_imx_probe(struct platform_device *pdev)
{
struct imx_port *sport;
@@ -1236,6 +1286,12 @@ static int serial_imx_probe(struct platform_device *pdev)
if (!sport)
return -ENOMEM;
+ ret = serial_imx_probe_dt(sport, pdev);
+ if (ret == -ENODEV)
+ ret = serial_imx_probe_pdata(sport, pdev);
+ if (ret)
+ goto free;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
ret = -ENODEV;
@@ -1260,7 +1316,6 @@ static int serial_imx_probe(struct platform_device *pdev)
sport->port.fifosize = 32;
sport->port.ops = &imx_pops;
sport->port.flags = UPF_BOOT_AUTOCONF;
- sport->port.line = pdev->id;
init_timer(&sport->timer);
sport->timer.function = imx_timeout;
sport->timer.data = (unsigned long)sport;
@@ -1274,17 +1329,13 @@ static int serial_imx_probe(struct platform_device *pdev)
sport->port.uartclk = clk_get_rate(sport->clk);
- imx_ports[pdev->id] = sport;
+ if (imx_ports[sport->port.line]) {
+ ret = -EBUSY;
+ goto clkput;
+ }
+ imx_ports[sport->port.line] = sport;
pdata = pdev->dev.platform_data;
- if (pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
- sport->have_rtscts = 1;
-
-#ifdef CONFIG_IRDA
- if (pdata && (pdata->flags & IMXUART_IRDA))
- sport->use_irda = 1;
-#endif
-
if (pdata && pdata->init) {
ret = pdata->init(pdev);
if (ret)
@@ -1336,6 +1387,11 @@ static int serial_imx_remove(struct platform_device *pdev)
return 0;
}
+static struct of_device_id imx_uart_matches[] = {
+ { .compatible = "fsl,imx51-uart" },
+ {},
+};
+
static struct platform_driver serial_imx_driver = {
.probe = serial_imx_probe,
.remove = serial_imx_remove,
@@ -1345,6 +1401,9 @@ static struct platform_driver serial_imx_driver = {
.driver = {
.name = "imx-uart",
.owner = THIS_MODULE,
+#if defined(CONFIG_OF)
+ .of_match_table = imx_uart_matches,
+#endif
},
};
--
1.7.1
next prev parent reply other threads:[~2011-03-09 5:19 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-09 5:19 [PATCH V3 0/5] Add MX51 basic DT support Jason Liu
[not found] ` <1299647973-21845-1-git-send-email-jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-03-09 5:19 ` [PATCH V3 1/5] arm/dt: add basic mx51 device tree support Jason Liu
2011-03-09 5:19 ` [PATCH V3 2/5] arm/dt: add very basic dts file for babbage board Jason Liu
2011-03-09 5:19 ` Jason Liu [this message]
2011-03-09 5:19 ` [PATCH V3 4/5] net/fec: check id_entry pointer before using it Jason Liu
2011-03-09 5:19 ` [PATCH V3 5/5] net/fec: add device tree matching support Jason Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1299647973-21845-4-git-send-email-jason.hui@linaro.org \
--to=jason.hui-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org \
--cc=patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).