[PATCH v3 0/3] can: xilinx_can: Add ECC feature support

[PATCH v3 0/3] can: xilinx_can: Add ECC feature support

[Srinivas Goud]

Add ECC feature support to Tx and Rx FIFOs for Xilinx CAN Controller.
Part of this feature configuration and counter registers added in 
Xilinx AXI CAN Controller for 1bit/2bit ECC errors count and reset.
Also driver reports 1bit/2bit ECC errors for FIFOs based on 
ECC error interrupts.

Add xlnx,has-ecc optional property for Xilinx AXI CAN controller to 
support ECC if the ECC block is enabled in the HW.

Add ethtool stats interface for getting all the ECC errors information. 

There is no public documentation for it available.

---
BRANCH: linux-can-next/testing

Changes in v3:
Update mailing list
Update commit description

Changes in v2:
Address review comments
Add ethtool stats interface
Update commit description


Srinivas Goud (3):
  dt-bindings: can: xilinx_can: Add ECC property 'xlnx,has-ecc'
  can: xilinx_can: Add ECC support
  can: xilinx_can: Add ethtool stats interface for ECC errors

 .../devicetree/bindings/net/can/xilinx,can.yaml    |   5 +
 drivers/net/can/xilinx_can.c                       | 154 +++++++++++++++++++--
 2 files changed, 144 insertions(+), 15 deletions(-)

-- 
2.1.1

[PATCH v3 1/3] dt-bindings: can: xilinx_can: Add ECC property 'xlnx,has-ecc'

[Srinivas Goud]

ECC feature added to Tx and Rx FIFOs for Xilinx AXI CAN Controller.
Part of this feature configuration and counter registers added in
IP for 1bit/2bit ECC errors.

xlnx,has-ecc is optional property and added to Xilinx AXI CAN Controller
node if ECC block enabled in the HW

Signed-off-by: Srinivas Goud <srinivas.goud@amd.com>
---
Changes in v3:
Update commit description

Changes in v2:
None

 Documentation/devicetree/bindings/net/can/xilinx,can.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/can/xilinx,can.yaml b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
index 64d57c3..c842610 100644
--- a/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
+++ b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
@@ -49,6 +49,10 @@ properties:
   resets:
     maxItems: 1
 
+  xlnx,has-ecc:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: CAN Tx and Rx fifo ECC enable flag (AXI CAN)
+
 required:
   - compatible
   - reg
@@ -137,6 +141,7 @@ examples:
         interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
         tx-fifo-depth = <0x40>;
         rx-fifo-depth = <0x40>;
+        xlnx,has-ecc
     };
 
   - |
-- 
2.1.1

Re: [PATCH v3 1/3] dt-bindings: can: xilinx_can: Add ECC property 'xlnx,has-ecc'

[Rob Herring]

On Mon, Aug 28, 2023 at 08:28:43PM +0530, Srinivas Goud wrote:
> ECC feature added to Tx and Rx FIFOs for Xilinx AXI CAN Controller.
> Part of this feature configuration and counter registers added in
> IP for 1bit/2bit ECC errors.
> 
> xlnx,has-ecc is optional property and added to Xilinx AXI CAN Controller
> node if ECC block enabled in the HW
> 
> Signed-off-by: Srinivas Goud <srinivas.goud@amd.com>
> ---
> Changes in v3:
> Update commit description
> 
> Changes in v2:
> None

Doesn't apply, dependency?

> 
>  Documentation/devicetree/bindings/net/can/xilinx,can.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/can/xilinx,can.yaml b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
> index 64d57c3..c842610 100644
> --- a/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
> +++ b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
> @@ -49,6 +49,10 @@ properties:
>    resets:
>      maxItems: 1
>  
> +  xlnx,has-ecc:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: CAN Tx and Rx fifo ECC enable flag (AXI CAN)

has ECC or enable ECC?

> +
>  required:
>    - compatible
>    - reg
> @@ -137,6 +141,7 @@ examples:
>          interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
>          tx-fifo-depth = <0x40>;
>          rx-fifo-depth = <0x40>;
> +        xlnx,has-ecc

Obviously not tested.

>      };
>  
>    - |
> -- 
> 2.1.1
> 

RE: [PATCH v3 1/3] dt-bindings: can: xilinx_can: Add ECC property 'xlnx,has-ecc'

[Goud, Srinivas]

Hi Rob,

>-----Original Message-----
>From: Rob Herring <robh@kernel.org>
>Sent: Monday, August 28, 2023 9:13 PM
>To: Goud, Srinivas <srinivas.goud@amd.com>
>Cc: wg@grandegger.com; mkl@pengutronix.de; davem@davemloft.net;
>edumazet@google.com; kuba@kernel.org; pabeni@redhat.com;
>krzysztof.kozlowski+dt@linaro.org; conor+dt@kernel.org;
>p.zabel@pengutronix.de; git (AMD-Xilinx) <git@amd.com>; Simek, Michal
><michal.simek@amd.com>; linux-can@vger.kernel.org; linux-arm-
>kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
>netdev@vger.kernel.org; devicetree@vger.kernel.org;
>appana.durga.rao@xilinx.com; naga.sureshkumar.relli@xilinx.com
>Subject: Re: [PATCH v3 1/3] dt-bindings: can: xilinx_can: Add ECC property
>'xlnx,has-ecc'
>
>On Mon, Aug 28, 2023 at 08:28:43PM +0530, Srinivas Goud wrote:
>> ECC feature added to Tx and Rx FIFOs for Xilinx AXI CAN Controller.
>> Part of this feature configuration and counter registers added in IP
>> for 1bit/2bit ECC errors.
>>
>> xlnx,has-ecc is optional property and added to Xilinx AXI CAN
>> Controller node if ECC block enabled in the HW
>>
>> Signed-off-by: Srinivas Goud <srinivas.goud@amd.com>
>> ---
>> Changes in v3:
>> Update commit description
>>
>> Changes in v2:
>> None
>
>Doesn't apply, dependency?
This patch is created on top of below commit and this is part of the 
linux-can-next/master and Linux torvalds GIT
https://lore.kernel.org/all/bfaed896cc51af02fe5f290675313ab4dcab0d33.1689164442.git.michal.simek@amd.com/

>
>>
>>  Documentation/devicetree/bindings/net/can/xilinx,can.yaml | 5 +++++
>>  1 file changed, 5 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
>> b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
>> index 64d57c3..c842610 100644
>> --- a/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
>> +++ b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
>> @@ -49,6 +49,10 @@ properties:
>>    resets:
>>      maxItems: 1
>>
>> +  xlnx,has-ecc:
>> +    $ref: /schemas/types.yaml#/definitions/flag
>> +    description: CAN Tx and Rx fifo ECC enable flag (AXI CAN)
>
>has ECC or enable ECC?
Will update description with "has ECC"

>
>> +
>>  required:
>>    - compatible
>>    - reg
>> @@ -137,6 +141,7 @@ examples:
>>          interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
>>          tx-fifo-depth = <0x40>;
>>          rx-fifo-depth = <0x40>;
>> +        xlnx,has-ecc
>
>Obviously not tested.
Will fix it.

Thanks,
Srinivas

Re: [PATCH v3 1/3] dt-bindings: can: xilinx_can: Add ECC property 'xlnx,has-ecc'

[Krzysztof Kozlowski]

On 30/08/2023 08:06, Goud, Srinivas wrote:
>>> +
>>>  required:
>>>    - compatible
>>>    - reg
>>> @@ -137,6 +141,7 @@ examples:
>>>          interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
>>>          tx-fifo-depth = <0x40>;
>>>          rx-fifo-depth = <0x40>;
>>> +        xlnx,has-ecc
>>
>> Obviously not tested.
> Will fix it.
> 

Fix it by fixing error or by testing? Can you do both?

Best regards,
Krzysztof

RE: [PATCH v3 1/3] dt-bindings: can: xilinx_can: Add ECC property 'xlnx,has-ecc'

[Goud, Srinivas]

Hi Krzysztof,

>-----Original Message-----
>From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>Sent: Wednesday, August 30, 2023 12:43 PM
>To: Goud, Srinivas <srinivas.goud@amd.com>; Rob Herring <robh@kernel.org>
>Cc: wg@grandegger.com; mkl@pengutronix.de; davem@davemloft.net;
>edumazet@google.com; kuba@kernel.org; pabeni@redhat.com;
>krzysztof.kozlowski+dt@linaro.org; conor+dt@kernel.org;
>p.zabel@pengutronix.de; git (AMD-Xilinx) <git@amd.com>; Simek, Michal
><michal.simek@amd.com>; linux-can@vger.kernel.org; linux-arm-
>kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
>netdev@vger.kernel.org; devicetree@vger.kernel.org;
>appana.durga.rao@xilinx.com; naga.sureshkumar.relli@xilinx.com
>Subject: Re: [PATCH v3 1/3] dt-bindings: can: xilinx_can: Add ECC property
>'xlnx,has-ecc'
>
>On 30/08/2023 08:06, Goud, Srinivas wrote:
>>>> +
>>>>  required:
>>>>    - compatible
>>>>    - reg
>>>> @@ -137,6 +141,7 @@ examples:
>>>>          interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
>>>>          tx-fifo-depth = <0x40>;
>>>>          rx-fifo-depth = <0x40>;
>>>> +        xlnx,has-ecc
>>>
>>> Obviously not tested.
>> Will fix it.
>>
>
>Fix it by fixing error or by testing? Can you do both?
Tested with v1 and missed in v2 due to copy paste, will test and send next version.

Thanks.
Srinivas

[PATCH v3 2/3] can: xilinx_can: Add ECC support

[Srinivas Goud]

Add ECC support for Xilinx CAN Controller, so this driver reports
1bit/2bit ECC errors for FIFO's based on ECC error interrupt.
ECC feature for Xilinx CAN Controller selected through
'xlnx,has-ecc' DT property

Signed-off-by: Srinivas Goud <srinivas.goud@amd.com>
---
Changes in v3:
None

Changes in v2:
Address review comments

 drivers/net/can/xilinx_can.c | 129 ++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 114 insertions(+), 15 deletions(-)

diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index abe58f1..798b32b 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -53,18 +53,23 @@ enum xcan_reg {
 	XCAN_AFR_OFFSET		= 0x60, /* Acceptance Filter */
 
 	/* only on CAN FD cores */
-	XCAN_F_BRPR_OFFSET	= 0x088, /* Data Phase Baud Rate
-					  * Prescaler
-					  */
-	XCAN_F_BTR_OFFSET	= 0x08C, /* Data Phase Bit Timing */
-	XCAN_TRR_OFFSET		= 0x0090, /* TX Buffer Ready Request */
-	XCAN_AFR_EXT_OFFSET	= 0x00E0, /* Acceptance Filter */
-	XCAN_FSR_OFFSET		= 0x00E8, /* RX FIFO Status */
-	XCAN_TXMSG_BASE_OFFSET	= 0x0100, /* TX Message Space */
+	XCAN_F_BRPR_OFFSET	= 0x88, /* Data Phase Baud Rate Prescaler */
+	XCAN_F_BTR_OFFSET	= 0x8C, /* Data Phase Bit Timing */
+	XCAN_TRR_OFFSET		= 0x90, /* TX Buffer Ready Request */
+
+	/* only on AXI CAN cores */
+	XCAN_ECC_CFG_OFFSET     = 0xC8, /* ECC Configuration */
+	XCAN_TXTLFIFO_ECC_OFFSET        = 0xCC, /* TXTL FIFO ECC error counter */
+	XCAN_TXOLFIFO_ECC_OFFSET        = 0xD0, /* TXOL FIFO ECC error counter */
+	XCAN_RXFIFO_ECC_OFFSET          = 0xD4, /* RX FIFO ECC error counter */
+
+	XCAN_AFR_EXT_OFFSET	= 0xE0, /* Acceptance Filter */
+	XCAN_FSR_OFFSET		= 0xE8, /* RX FIFO Status */
+	XCAN_TXMSG_BASE_OFFSET	= 0x100, /* TX Message Space */
+	XCAN_AFR_2_MASK_OFFSET  = 0xA00, /* Acceptance Filter MASK */
+	XCAN_AFR_2_ID_OFFSET    = 0xA04, /* Acceptance Filter ID */
 	XCAN_RXMSG_BASE_OFFSET	= 0x1100, /* RX Message Space */
 	XCAN_RXMSG_2_BASE_OFFSET	= 0x2100, /* RX Message Space */
-	XCAN_AFR_2_MASK_OFFSET	= 0x0A00, /* Acceptance Filter MASK */
-	XCAN_AFR_2_ID_OFFSET	= 0x0A04, /* Acceptance Filter ID */
 };
 
 #define XCAN_FRAME_ID_OFFSET(frame_base)	((frame_base) + 0x00)
@@ -124,6 +129,12 @@ enum xcan_reg {
 #define XCAN_IXR_TXFLL_MASK		0x00000004 /* Tx FIFO Full intr */
 #define XCAN_IXR_TXOK_MASK		0x00000002 /* TX successful intr */
 #define XCAN_IXR_ARBLST_MASK		0x00000001 /* Arbitration lost intr */
+#define XCAN_IXR_E2BERX_MASK            BIT(23) /* RX FIFO two bit ECC error */
+#define XCAN_IXR_E1BERX_MASK            BIT(22) /* RX FIFO one bit ECC error */
+#define XCAN_IXR_E2BETXOL_MASK          BIT(21) /* TXOL FIFO two bit ECC error */
+#define XCAN_IXR_E1BETXOL_MASK          BIT(20) /* TXOL FIFO One bit ECC error */
+#define XCAN_IXR_E2BETXTL_MASK          BIT(19) /* TXTL FIFO Two bit ECC error */
+#define XCAN_IXR_E1BETXTL_MASK          BIT(18) /* TXTL FIFO One bit ECC error */
 #define XCAN_IDR_ID1_MASK		0xFFE00000 /* Standard msg identifier */
 #define XCAN_IDR_SRR_MASK		0x00100000 /* Substitute remote TXreq */
 #define XCAN_IDR_IDE_MASK		0x00080000 /* Identifier extension */
@@ -137,6 +148,11 @@ enum xcan_reg {
 #define XCAN_2_FSR_RI_MASK		0x0000003F /* RX Read Index */
 #define XCAN_DLCR_EDL_MASK		0x08000000 /* EDL Mask in DLC */
 #define XCAN_DLCR_BRS_MASK		0x04000000 /* BRS Mask in DLC */
+#define XCAN_ECC_CFG_REECRX_MASK	BIT(2) /* Reset RX FIFO ECC error counters */
+#define XCAN_ECC_CFG_REECTXOL_MASK	BIT(1) /* Reset TXOL FIFO ECC error counters */
+#define XCAN_ECC_CFG_REECTXTL_MASK	BIT(0) /* Reset TXTL FIFO ECC error counters */
+#define XCAN_ECC_1BIT_CNT_MASK		GENMASK(15, 0) /* FIFO ECC 1bit count mask */
+#define XCAN_ECC_2BIT_CNT_MASK		GENMASK(31, 16) /* FIFO ECC 2bit count mask */
 
 /* CAN register bit shift - XCAN_<REG>_<BIT>_SHIFT */
 #define XCAN_BRPR_TDC_ENABLE		BIT(16) /* Transmitter Delay Compensation (TDC) Enable */
@@ -202,6 +218,13 @@ struct xcan_devtype_data {
  * @devtype:			Device type specific constants
  * @transceiver:		Optional pointer to associated CAN transceiver
  * @rstc:			Pointer to reset control
+ * @ecc_enable:			ECC enable flag
+ * @ecc_2bit_rxfifo_cnt:	RXFIFO 2bit ECC count
+ * @ecc_1bit_rxfifo_cnt:	RXFIFO 1bit ECC count
+ * @ecc_2bit_txolfifo_cnt:	TXOLFIFO 2bit ECC count
+ * @ecc_1bit_txolfifo_cnt:	TXOLFIFO 1bit ECC count
+ * @ecc_2bit_txtlfifo_cnt:	TXTLFIFO 2bit ECC count
+ * @ecc_1bit_txtlfifo_cnt:	TXTLFIFO 1bit ECC count
  */
 struct xcan_priv {
 	struct can_priv can;
@@ -221,6 +244,13 @@ struct xcan_priv {
 	struct xcan_devtype_data devtype;
 	struct phy *transceiver;
 	struct reset_control *rstc;
+	bool ecc_enable;
+	u64 ecc_2bit_rxfifo_cnt;
+	u64 ecc_1bit_rxfifo_cnt;
+	u64 ecc_2bit_txolfifo_cnt;
+	u64 ecc_1bit_txolfifo_cnt;
+	u64 ecc_2bit_txtlfifo_cnt;
+	u64 ecc_1bit_txtlfifo_cnt;
 };
 
 /* CAN Bittiming constants as per Xilinx CAN specs */
@@ -523,6 +553,11 @@ static int xcan_chip_start(struct net_device *ndev)
 		XCAN_IXR_ERROR_MASK | XCAN_IXR_RXOFLW_MASK |
 		XCAN_IXR_ARBLST_MASK | xcan_rx_int_mask(priv);
 
+	if (priv->ecc_enable)
+		ier |= XCAN_IXR_E2BERX_MASK | XCAN_IXR_E1BERX_MASK |
+			XCAN_IXR_E2BETXOL_MASK | XCAN_IXR_E1BETXOL_MASK |
+			XCAN_IXR_E2BETXTL_MASK | XCAN_IXR_E1BETXTL_MASK;
+
 	if (priv->devtype.flags & XCAN_FLAG_RXMNF)
 		ier |= XCAN_IXR_RXMNF_MASK;
 
@@ -1127,6 +1162,58 @@ static void xcan_err_interrupt(struct net_device *ndev, u32 isr)
 		priv->can.can_stats.bus_error++;
 	}
 
+	if (priv->ecc_enable) {
+		u32 reg_ecc;
+
+		reg_ecc = priv->read_reg(priv, XCAN_RXFIFO_ECC_OFFSET);
+		if (isr & XCAN_IXR_E2BERX_MASK) {
+			priv->ecc_2bit_rxfifo_cnt +=
+				FIELD_GET(XCAN_ECC_2BIT_CNT_MASK, reg_ecc);
+			netdev_dbg(ndev, "%s: RX FIFO 2bit ECC error count %lld\n",
+				   __func__, priv->ecc_2bit_rxfifo_cnt);
+		}
+		if (isr & XCAN_IXR_E1BERX_MASK) {
+			priv->ecc_1bit_rxfifo_cnt +=
+				FIELD_GET(XCAN_ECC_1BIT_CNT_MASK, reg_ecc);
+			netdev_dbg(ndev, "%s: RX FIFO 1bit ECC error count %lld\n",
+				   __func__, priv->ecc_1bit_rxfifo_cnt);
+		}
+
+		reg_ecc = priv->read_reg(priv, XCAN_TXOLFIFO_ECC_OFFSET);
+		if (isr & XCAN_IXR_E2BETXOL_MASK) {
+			priv->ecc_2bit_txolfifo_cnt +=
+				FIELD_GET(XCAN_ECC_2BIT_CNT_MASK, reg_ecc);
+			netdev_dbg(ndev, "%s: TXOL FIFO 2bit ECC error count %lld\n",
+				   __func__, priv->ecc_2bit_txolfifo_cnt);
+		}
+		if (isr & XCAN_IXR_E1BETXOL_MASK) {
+			priv->ecc_1bit_txolfifo_cnt +=
+				FIELD_GET(XCAN_ECC_1BIT_CNT_MASK, reg_ecc);
+			netdev_dbg(ndev, "%s: TXOL FIFO 1bit ECC error count %lld\n",
+				   __func__, priv->ecc_1bit_txolfifo_cnt);
+		}
+
+		reg_ecc = priv->read_reg(priv, XCAN_TXTLFIFO_ECC_OFFSET);
+		if (isr & XCAN_IXR_E2BETXTL_MASK) {
+			priv->ecc_2bit_txtlfifo_cnt +=
+				FIELD_GET(XCAN_ECC_2BIT_CNT_MASK, reg_ecc);
+			netdev_dbg(ndev, "%s: TXTL FIFO 2bit ECC error count %lld\n",
+				   __func__, priv->ecc_2bit_txtlfifo_cnt);
+		}
+		if (isr & XCAN_IXR_E1BETXTL_MASK) {
+			priv->ecc_1bit_txtlfifo_cnt +=
+				FIELD_GET(XCAN_ECC_1BIT_CNT_MASK, reg_ecc);
+			netdev_dbg(ndev, "%s: TXTL FIFO 1bit ECC error count %lld\n",
+				   __func__, priv->ecc_1bit_txtlfifo_cnt);
+		}
+
+		/* The counter reaches its maximum at 0xffff and does not overflow.
+		 * Accept the small race window between reading and resetting ECC counters.
+		 */
+		priv->write_reg(priv, XCAN_ECC_CFG_OFFSET, XCAN_ECC_CFG_REECRX_MASK |
+				XCAN_ECC_CFG_REECTXOL_MASK | XCAN_ECC_CFG_REECTXTL_MASK);
+	}
+
 	if (cf.can_id) {
 		struct can_frame *skb_cf;
 		struct sk_buff *skb = alloc_can_err_skb(ndev, &skb_cf);
@@ -1354,9 +1441,8 @@ static irqreturn_t xcan_interrupt(int irq, void *dev_id)
 {
 	struct net_device *ndev = (struct net_device *)dev_id;
 	struct xcan_priv *priv = netdev_priv(ndev);
-	u32 isr, ier;
-	u32 isr_errors;
 	u32 rx_int_mask = xcan_rx_int_mask(priv);
+	u32 isr, ier, isr_errors, mask;
 
 	/* Get the interrupt status from Xilinx CAN */
 	isr = priv->read_reg(priv, XCAN_ISR_OFFSET);
@@ -1374,10 +1460,17 @@ static irqreturn_t xcan_interrupt(int irq, void *dev_id)
 	if (isr & XCAN_IXR_TXOK_MASK)
 		xcan_tx_interrupt(ndev, isr);
 
+	mask = XCAN_IXR_ERROR_MASK | XCAN_IXR_RXOFLW_MASK |
+		XCAN_IXR_BSOFF_MASK | XCAN_IXR_ARBLST_MASK |
+		XCAN_IXR_RXMNF_MASK;
+
+	if (priv->ecc_enable)
+		mask |= XCAN_IXR_E2BERX_MASK | XCAN_IXR_E1BERX_MASK |
+			XCAN_IXR_E2BETXOL_MASK | XCAN_IXR_E1BETXOL_MASK |
+			XCAN_IXR_E2BETXTL_MASK | XCAN_IXR_E1BETXTL_MASK;
+
 	/* Check for the type of error interrupt and Processing it */
-	isr_errors = isr & (XCAN_IXR_ERROR_MASK | XCAN_IXR_RXOFLW_MASK |
-			    XCAN_IXR_BSOFF_MASK | XCAN_IXR_ARBLST_MASK |
-			    XCAN_IXR_RXMNF_MASK);
+	isr_errors = isr & mask;
 	if (isr_errors) {
 		priv->write_reg(priv, XCAN_ICR_OFFSET, isr_errors);
 		xcan_err_interrupt(ndev, isr);
@@ -1796,6 +1889,7 @@ static int xcan_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	priv = netdev_priv(ndev);
+	priv->ecc_enable = of_property_read_bool(pdev->dev.of_node, "xlnx,has-ecc");
 	priv->dev = &pdev->dev;
 	priv->can.bittiming_const = devtype->bittiming_const;
 	priv->can.do_set_mode = xcan_do_set_mode;
@@ -1912,6 +2006,11 @@ static int xcan_probe(struct platform_device *pdev)
 		   priv->reg_base, ndev->irq, priv->can.clock.freq,
 		   hw_tx_max, priv->tx_max);
 
+	if (priv->ecc_enable) {
+		/* Reset FIFO ECC counters */
+		priv->write_reg(priv, XCAN_ECC_CFG_OFFSET, XCAN_ECC_CFG_REECRX_MASK |
+			XCAN_ECC_CFG_REECTXOL_MASK | XCAN_ECC_CFG_REECTXTL_MASK);
+	}
 	return 0;
 
 err_disableclks:
-- 
2.1.1

[PATCH v3 3/3] can: xilinx_can: Add ethtool stats interface for ECC errors

[Srinivas Goud]

Add ethtool stats interface for reading FIFO 1bit/2bit
ECC errors information.

Signed-off-by: Srinivas Goud <srinivas.goud@amd.com>
---
Changes in v3:
None

Changes in v2:
Add ethtool stats interface

 drivers/net/can/xilinx_can.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 798b32b..50e0c9d 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -219,6 +219,7 @@ struct xcan_devtype_data {
  * @transceiver:		Optional pointer to associated CAN transceiver
  * @rstc:			Pointer to reset control
  * @ecc_enable:			ECC enable flag
+ * @stats_lock:			Lock for synchronizing hardware stats
  * @ecc_2bit_rxfifo_cnt:	RXFIFO 2bit ECC count
  * @ecc_1bit_rxfifo_cnt:	RXFIFO 1bit ECC count
  * @ecc_2bit_txolfifo_cnt:	TXOLFIFO 2bit ECC count
@@ -245,6 +246,7 @@ struct xcan_priv {
 	struct phy *transceiver;
 	struct reset_control *rstc;
 	bool ecc_enable;
+	spinlock_t stats_lock; /* Lock for synchronizing hardware stats */
 	u64 ecc_2bit_rxfifo_cnt;
 	u64 ecc_1bit_rxfifo_cnt;
 	u64 ecc_2bit_txolfifo_cnt;
@@ -1164,6 +1166,9 @@ static void xcan_err_interrupt(struct net_device *ndev, u32 isr)
 
 	if (priv->ecc_enable) {
 		u32 reg_ecc;
+		unsigned long flags;
+
+		spin_lock_irqsave(&priv->stats_lock, flags);
 
 		reg_ecc = priv->read_reg(priv, XCAN_RXFIFO_ECC_OFFSET);
 		if (isr & XCAN_IXR_E2BERX_MASK) {
@@ -1212,6 +1217,8 @@ static void xcan_err_interrupt(struct net_device *ndev, u32 isr)
 		 */
 		priv->write_reg(priv, XCAN_ECC_CFG_OFFSET, XCAN_ECC_CFG_REECRX_MASK |
 				XCAN_ECC_CFG_REECTXOL_MASK | XCAN_ECC_CFG_REECTXTL_MASK);
+
+		spin_unlock_irqrestore(&priv->stats_lock, flags);
 	}
 
 	if (cf.can_id) {
@@ -1639,6 +1646,23 @@ static int xcan_get_auto_tdcv(const struct net_device *ndev, u32 *tdcv)
 	return 0;
 }
 
+static void ethtool_get_ethtool_stats(struct net_device *ndev,
+				      struct ethtool_stats *stats, u64 *data)
+{
+	struct xcan_priv *priv = netdev_priv(ndev);
+	unsigned long flags;
+	int i = 0;
+
+	spin_lock_irqsave(&priv->stats_lock, flags);
+	data[i++] = priv->ecc_2bit_rxfifo_cnt;
+	data[i++] = priv->ecc_1bit_rxfifo_cnt;
+	data[i++] = priv->ecc_2bit_txolfifo_cnt;
+	data[i++] = priv->ecc_1bit_txolfifo_cnt;
+	data[i++] = priv->ecc_2bit_txtlfifo_cnt;
+	data[i++] = priv->ecc_1bit_txtlfifo_cnt;
+	spin_unlock_irqrestore(&priv->stats_lock, flags);
+}
+
 static const struct net_device_ops xcan_netdev_ops = {
 	.ndo_open	= xcan_open,
 	.ndo_stop	= xcan_close,
@@ -1648,6 +1672,7 @@ static const struct net_device_ops xcan_netdev_ops = {
 
 static const struct ethtool_ops xcan_ethtool_ops = {
 	.get_ts_info = ethtool_op_get_ts_info,
+	.get_ethtool_stats = ethtool_get_ethtool_stats,
 };
 
 /**
-- 
2.1.1