Re: [PATCH v2 1/5] arm64: dts: ti: k3-am6*: Set eMMC clock parents to default

["Kumar, Udit" <u-kumar1@ti.com>]

On 4/22/2025 6:07 PM, Nishanth Menon wrote:
> On 09:36-20250421, Judith Mendez wrote:
>> Hi Udit,
>>
>> On 4/19/25 10:00 AM, Kumar, Udit wrote:
>>> On 4/18/2025 5:00 AM, Judith Mendez wrote:
>>>> Set eMMC clock parents to the defaults which is MAIN_PLL0_HSDIV5_CLKOUT
>>>> for eMMC. This change is necessary since DM is not implementing the
>>>> correct procedure to switch PLL clock source for eMMC and we have a
>>>> non-glich-free mux. To remove any potential issues, lets switch back to
>>>> the defaults.
>>> IMO, we need to fix DM  if not then documentation [0] .
>> DM cannot be fixed for only one IP and documentation says what clock
>> parents are supported, it does not have to say what are the issues
>> that come with using a specific clock parent.
> As I understand the arasan IP requirement is that the IP must be held in
> reset while the clock is switched, which is not reasonable to implement
> given decoupled systems like DM and Linux OS.


Thanks , then fix should be extended to sdhci1 as well


>
>>> Then only this patch is ok because as per document [0]
>>>
>>> removed clock by this patch is valid parent for eMMC.
>> The clock parent currently set is a valid parent, but we have non-
>> glitch-free muxes and to avoid any potential issues with these, we
>> should switch back to the defaults. It seems like we randomly switched
>> from the default for no good reason and it has been copy paste per
>> platforms since then, so we are switching back to the defaults now.
>>
>> ~ Judith
>>
>>> [0] https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/j722s/clocks.html
>>>
>>> Thanks
>>>
>>> Udit
>>>
>>>> Fixes: c37c58fdeb8a ("arm64: dts: ti: k3-am62: Add more peripheral
>>>> nodes")
>>>> Fixes: d3ae4e8d8b6a ("arm64: dts: ti: k3-am62a-main: Add sdhci0
>>>> instance")
>>>> Fixes: b5080c7c1f7e ("arm64: dts: ti: k3-am62p: Add nodes for more IPs")
> Please follow ./Documentation/process/stable-kernel-rules.rst - this is
> easier to backport if these were to be split into 3 different patches.
> Please do not forget to add Cc: stable@vger.kernel.org as per the rules
> as well.
>
>>>> Signed-off-by: Judith Mendez <jm@ti.com>
>>>> ---
>>>>    arch/arm64/boot/dts/ti/k3-am62-main.dtsi               | 2 --
>>>>    arch/arm64/boot/dts/ti/k3-am62a-main.dtsi              | 2 --
>>>>    arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi | 2 --
>>>>    3 files changed, 6 deletions(-)
>>>>
>>>> [..]