Re: [PATCH 4/9] dt-bindings: iio: adc: adi,ad7606: add supply properties

[Guillaume Stols <gstols@baylibre.com>]

On 6/18/24 17:12, Conor Dooley wrote:
> On Tue, Jun 18, 2024 at 02:02:36PM +0000, Guillaume Stols wrote:
>> Add voltage supplies
> Are these available on all devices?

Yes all chips from  AD7606 series (including AD7606B, AD7606C(-16,-18),
AD7605-4, AD7606 (-4,-8,-6), AD7607, AD7608, AD7609), as well as AD7616
have a VDrive pin, as well as a RefSelect + RefIn/RefOut pin that takes
an input voltage in case RefSelect is high, or outputs the internal
reference voltage if RefSelect is low.

>
>> Signed-off-by: Guillaume Stols <gstols@baylibre.com>
>> ---
>>   Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml | 9 +++++++++
>>   1 file changed, 9 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
>> index 80866940123c..e480c9a7c7ca 100644
>> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
>> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
>> @@ -35,6 +35,15 @@ properties:
>>   
>>     avcc-supply: true
>>   
>> +  vdrive-supply:
>> +    description:
>> +      Determines the voltage level at which the interface logic pins will
>> +      operate.
>> +
>> +  refin-supply:
>> +    description:
>> +      The voltage supply for optional external reference voltage.
>> +
>>     interrupts:
>>       description:
>>         The BUSY pin falling edge indicates that the conversion is over, and thus
>>
>> -- 
>> 2.34.1
>>