From: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org
Cc: nicolas.pitre-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Subject: [PATCH 7/7] dt: update fsl-esdhc bindings for imx esdhc OF support
Date: Mon, 14 Mar 2011 22:25:59 +0800 [thread overview]
Message-ID: <1300112759-3495-8-git-send-email-shawn.guo@linaro.org> (raw)
In-Reply-To: <1300112759-3495-1-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
.../devicetree/bindings/mmc/fsl-esdhc.txt | 5 ++++-
1 files changed, 4 insertions(+), 1 deletions(-)
diff --git a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
index 64bcb8b..fac52e2 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
@@ -9,7 +9,10 @@ Required properties:
- reg : should contain eSDHC registers location and length.
- interrupts : should contain eSDHC interrupt.
- interrupt-parent : interrupt source phandle.
- - clock-frequency : specifies eSDHC base clock frequency.
+ - clock-frequency : (mandatory for powerpc platform) specifies
+ eSDHC base clock frequency.
+ - bus-clock : (mandatory for arm platform) specifies phandle of
+ eSDHC clock provider.
- sdhci,wp-inverted : (optional) specifies that eSDHC controller
reports inverted write-protect state;
- sdhci,1-bit-only : (optional) specifies that a controller can
--
1.7.1
next prev parent reply other threads:[~2011-03-14 14:25 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-14 14:25 [PATCH 0/7] support sdhci-esdhc-imx as an OF device Shawn Guo
[not found] ` <1300112759-3495-1-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-03-14 14:25 ` [PATCH 1/7] mx51 enchance the sd/mmc HW timing compatibility on mx51 boards Shawn Guo
2011-03-14 14:25 ` [PATCH 2/7] arm/dt: add pad configurations for mx51 babbage Shawn Guo
[not found] ` <1300112759-3495-3-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-03-14 15:20 ` Rob Herring
[not found] ` <4D7E3230.6040505-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2011-03-14 15:53 ` Shawn Guo
[not found] ` <20110314155313.GC3674-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2011-03-15 0:57 ` Shawn Guo
2011-03-15 7:57 ` Grant Likely
2011-03-14 14:25 ` [PATCH 3/7] mmc: make the reference to sdhci_tegra_dt_pdata conditional Shawn Guo
[not found] ` <1300112759-3495-4-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-03-15 7:58 ` Grant Likely
[not found] ` <20110315075859.GL23050-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2011-03-17 19:59 ` Grant Likely
[not found] ` <AANLkTi=umf9nDpExLEBgJEMgUP-CJUUEbAQrQfdBw7Fd-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-03-18 1:22 ` Shawn Guo
[not found] ` <20110318012202.GA26951-+NayF8gZjK2ctlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2011-03-18 4:58 ` Grant Likely
2011-03-14 14:25 ` [PATCH 4/7] mmc: consolidate sdhci_pltfm_data and sdhci_of_data into one Shawn Guo
[not found] ` <1300112759-3495-5-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-03-15 19:55 ` Grant Likely
[not found] ` <20110315195513.GA20845-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2011-03-17 6:33 ` Shawn Guo
2011-03-17 20:29 ` Grant Likely
2011-03-14 14:25 ` [PATCH 5/7] mmc: support sdhci-esdhc-imx as an OF device Shawn Guo
[not found] ` <1300112759-3495-6-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-03-15 19:59 ` Grant Likely
[not found] ` <20110315195926.GB20845-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2011-03-16 14:39 ` Shawn Guo
2011-03-17 20:22 ` Grant Likely
2011-03-17 20:42 ` Rob Herring
2011-03-14 14:25 ` [PATCH 6/7] arm/dts: babbage: add device nodes for esdhc Shawn Guo
2011-03-14 14:25 ` Shawn Guo [this message]
2011-03-14 15:46 ` [PATCH 0/7] support sdhci-esdhc-imx as an OF device Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1300112759-3495-8-git-send-email-shawn.guo@linaro.org \
--to=shawn.guo-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org \
--cc=nicolas.pitre-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).