From: Jason Liu <jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Cc: grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org,
patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Subject: [PATCH] arm/dt: Add basic device tree support for genesi mx board
Date: Wed, 30 Mar 2011 21:15:14 +0800 [thread overview]
Message-ID: <1301490914-2279-1-git-send-email-jason.hui@linaro.org> (raw)
This patch add support for Genesi Efika MX Smarttop and Smartbook
Signed-off-by: Jason Liu <jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
Grant, uboot patch has been included in your uboot patchset.
And mx51_efika build break, need pull in the patch to fix it
http://git.pengutronix.de/?p=imx/linux-2.6.git;a=commitdiff;
h=251290a6078cb88382344b3ee535ae8c6254c1b5
---
arch/arm/boot/dts/genesi-efikamx.dts | 30 ++++++++++++++++++++++++++++++
arch/arm/boot/dts/genesi-efikasb.dts | 30 ++++++++++++++++++++++++++++++
arch/arm/mach-mx5/Kconfig | 1 +
arch/arm/mach-mx5/board-mx51_efikamx.c | 6 ++++++
arch/arm/mach-mx5/board-mx51_efikasb.c | 6 ++++++
5 files changed, 73 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/genesi-efikamx.dts b/arch/arm/boot/dts/genesi-efikamx.dts
new file mode 100644
index 0000000..eca9616
--- /dev/null
+++ b/arch/arm/boot/dts/genesi-efikamx.dts
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+
+/ {
+ model = "Genesi EfikaMX nettop";
+ compatible = "genesi,efikamx";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x90000000 0x20000000>;
+ };
+
+ chosen {
+ };
+};
diff --git a/arch/arm/boot/dts/genesi-efikasb.dts b/arch/arm/boot/dts/genesi-efikasb.dts
new file mode 100644
index 0000000..fc60baf
--- /dev/null
+++ b/arch/arm/boot/dts/genesi-efikasb.dts
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+
+/ {
+ model = "Genesi Efika Smartbook";
+ compatible = "genesi,efikasb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x90000000 0x20000000>;
+ };
+
+ chosen {
+ };
+};
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index a61e01e..8aba7ea 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -123,6 +123,7 @@ config MX5_DT_COMMON
config MX51_EFIKA_COMMON
bool
select SOC_IMX51
+ select MX5_DT_COMMON
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index acab191..1e9ed26 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -286,6 +286,11 @@ static struct sys_timer mx51_efikamx_timer = {
.init = mx51_efikamx_timer_init,
};
+static const char *mx51_efikamx_dt_match[] __initdata = {
+ "genesi,efikamx",
+ NULL
+};
+
MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
/* Maintainer: Amit Kucheria <amit.kucheria-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> */
.boot_params = MX51_PHYS_OFFSET + 0x100,
@@ -294,4 +299,5 @@ MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
.init_irq = mx51_init_irq,
.timer = &mx51_efikamx_timer,
.init_machine = mx51_efikamx_init,
+ .dt_compat = mx51_efikamx_dt_match,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index db04ce8..6b80fce 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -273,6 +273,11 @@ static struct sys_timer mx51_efikasb_timer = {
.init = mx51_efikasb_timer_init,
};
+static const char *mx51_efikasb_dt_match[] __initdata = {
+ "genesi,efikasb",
+ NULL
+};
+
MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook")
.boot_params = MX51_PHYS_OFFSET + 0x100,
.map_io = mx51_map_io,
@@ -280,4 +285,5 @@ MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook")
.init_irq = mx51_init_irq,
.init_machine = efikasb_board_init,
.timer = &mx51_efikasb_timer,
+ .dt_compat = mx51_efikasb_dt_match,
MACHINE_END
--
1.7.1
next reply other threads:[~2011-03-30 13:15 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-30 13:15 Jason Liu [this message]
[not found] ` <1301490914-2279-1-git-send-email-jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-03-30 15:58 ` [PATCH] arm/dt: Add basic device tree support for genesi mx board Steev Klimaszewski
[not found] ` <AANLkTikZyhk1MHnTMd6KwGCLu7MTOpq3iR+ajDDAJDPs-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-03-31 0:30 ` Loïc Minier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1301490914-2279-1-git-send-email-jason.hui@linaro.org \
--to=jason.hui-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org \
--cc=patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).