From: Michal Simek <monstr@monstr.eu>
To: devicetree-discuss@lists.ozlabs.org
Cc: grant.likely@secretlab.ca, john.williams@petalogix.com,
linux-kernel@vger.kernel.org, hjk@hansjkoch.de,
w.sang@pengutronix.de, arnd@arndb.de,
Michal Simek <monstr@monstr.eu>
Subject: [PATCH v4] uio/pdrv_genirq: Add OF support
Date: Mon, 2 May 2011 08:51:55 +0200 [thread overview]
Message-ID: <1304319115-32745-1-git-send-email-monstr@monstr.eu> (raw)
Adding OF binding to genirq.
Version string is setup to the "devicetree".
Compatible string is not setup for now but you can add your
custom compatible string to uio_of_genirq_match structure.
For example with "vendor,device" compatible string:
static const struct of_device_id __devinitconst uio_of_genirq_match[] = {
{ .compatible = "vendor,device", },
{ /* empty for now */ },
};
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
v4: Remove dev_info messages
Check irq against -ENXIO for no irq
v3: Fix irq binding
Use "devicetree" as version string
v2: Remove additional resource binding
Setup correct version string
Clear compatible string
---
drivers/uio/uio_pdrv_genirq.c | 39 +++++++++++++++++++++++++++++++++++++++
1 files changed, 39 insertions(+), 0 deletions(-)
diff --git a/drivers/uio/uio_pdrv_genirq.c b/drivers/uio/uio_pdrv_genirq.c
index 7174d51..ed6bf64 100644
--- a/drivers/uio/uio_pdrv_genirq.c
+++ b/drivers/uio/uio_pdrv_genirq.c
@@ -23,6 +23,10 @@
#include <linux/pm_runtime.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+
#define DRIVER_NAME "uio_pdrv_genirq"
struct uio_pdrv_genirq_platdata {
@@ -97,6 +101,27 @@ static int uio_pdrv_genirq_probe(struct platform_device *pdev)
int ret = -EINVAL;
int i;
+ if (!uioinfo) {
+ int irq;
+
+ /* alloc uioinfo for one device */
+ uioinfo = kzalloc(sizeof(*uioinfo), GFP_KERNEL);
+ if (!uioinfo) {
+ ret = -ENOMEM;
+ dev_err(&pdev->dev, "unable to kmalloc\n");
+ goto bad2;
+ }
+ uioinfo->name = pdev->dev.of_node->name;
+ uioinfo->version = "devicetree";
+
+ /* Multiple IRQs are not supported */
+ irq = platform_get_irq(pdev, 0);
+ if (irq == -ENXIO)
+ uioinfo->irq = UIO_IRQ_NONE;
+ else
+ uioinfo->irq = irq;
+ }
+
if (!uioinfo || !uioinfo->name || !uioinfo->version) {
dev_err(&pdev->dev, "missing platform_data\n");
goto bad0;
@@ -180,6 +205,10 @@ static int uio_pdrv_genirq_probe(struct platform_device *pdev)
kfree(priv);
pm_runtime_disable(&pdev->dev);
bad0:
+ /* kfree uioinfo for CONFIG_OF */
+ if (!pdev->dev.platform_data)
+ kfree(uioinfo);
+ bad2:
return ret;
}
@@ -215,6 +244,15 @@ static const struct dev_pm_ops uio_pdrv_genirq_dev_pm_ops = {
.runtime_resume = uio_pdrv_genirq_runtime_nop,
};
+#ifdef CONFIG_OF
+static const struct of_device_id __devinitconst uio_of_genirq_match[] = {
+ { /* empty for now */ },
+};
+MODULE_DEVICE_TABLE(of, uio_of_genirq_match);
+#else
+# define uio_of_genirq_match NULL
+#endif
+
static struct platform_driver uio_pdrv_genirq = {
.probe = uio_pdrv_genirq_probe,
.remove = uio_pdrv_genirq_remove,
@@ -222,6 +260,7 @@ static struct platform_driver uio_pdrv_genirq = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
.pm = &uio_pdrv_genirq_dev_pm_ops,
+ .of_match_table = uio_of_genirq_match,
},
};
--
1.5.5.6
next reply other threads:[~2011-05-02 6:51 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-02 6:51 Michal Simek [this message]
[not found] ` <1304319115-32745-1-git-send-email-monstr-pSz03upnqPeHXe+LvDLADg@public.gmane.org>
2011-05-03 19:57 ` [PATCH v4] uio/pdrv_genirq: Add OF support Hans J. Koch
2011-05-03 20:34 ` Wolfram Sang
[not found] ` <20110503203412.GA2119-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2011-05-03 22:14 ` Hans J. Koch
2011-05-04 13:21 ` Michal Simek
2011-05-04 19:47 ` Hans J. Koch
2011-05-04 20:29 ` Grant Likely
2011-05-05 5:26 ` Michal Simek
[not found] ` <4DC23513.2090007-pSz03upnqPeHXe+LvDLADg@public.gmane.org>
2011-05-06 0:55 ` Hans J. Koch
2011-05-04 13:12 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1304319115-32745-1-git-send-email-monstr@monstr.eu \
--to=monstr@monstr.eu \
--cc=arnd@arndb.de \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=hjk@hansjkoch.de \
--cc=john.williams@petalogix.com \
--cc=linux-kernel@vger.kernel.org \
--cc=w.sang@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).