[PATCH v2 01/11] x86, olpc: add missing elements to device tree

[PATCH v2 01/11] x86, olpc: add missing elements to device tree

[Daniel Drake]

In response to new device tree code in the kernel, OLPC will start
using it for probing of certain devices. However, some firmware fixes
are needed to put the devicetree into a usable state.

Retain compatibility with old firmware by fixing up the device tree
at boot-time if it does not contain the new nodes/properties that
we need for probing. This is the same approach taken on PPC platforms.

Signed-off-by: Daniel Drake <dsd-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org>
Acked-by: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Acked-by: Andres Salomon <dilinger-pFFUokh25LWsTnJN9+BGXg@public.gmane.org>
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
---
 arch/x86/platform/olpc/olpc_dt.c |  103 ++++++++++++++++++++++++++++++++++++++
 1 files changed, 103 insertions(+), 0 deletions(-)

diff --git a/arch/x86/platform/olpc/olpc_dt.c b/arch/x86/platform/olpc/olpc_dt.c
index d39f63d..d6ee929 100644
--- a/arch/x86/platform/olpc/olpc_dt.c
+++ b/arch/x86/platform/olpc/olpc_dt.c
@@ -165,6 +165,107 @@ static struct of_pdt_ops prom_olpc_ops __initdata = {
 	.pkg2path = olpc_dt_pkg2path,
 };
 
+static phandle __init olpc_dt_finddevice(const char *path)
+{
+	phandle node;
+	const void *args[] = { path };
+	void *res[] = { &node };
+
+	if (olpc_ofw("finddevice", args, res)) {
+		pr_err("olpc_dt: finddevice failed!\n");
+		return 0;
+	}
+
+	if ((s32) node == -1)
+		return 0;
+
+	return node;
+}
+
+static int __init olpc_dt_interpret(const char *words)
+{
+	int result;
+	const void *args[] = { words };
+	void *res[] = { &result };
+
+	if (olpc_ofw("interpret", args, res)) {
+		pr_err("olpc_dt: interpret failed!\n");
+		return -1;
+	}
+
+	return result;
+}
+
+/*
+ * Extract board revision directly from OFW device tree.
+ * We can't use olpc_platform_info because that hasn't been set up yet.
+ */
+static u32 __init olpc_dt_get_board_revision(void)
+{
+	phandle node;
+	__be32 rev;
+	int r;
+
+	node = olpc_dt_finddevice("/");
+	if (!node)
+		return 0;
+
+	r = olpc_dt_getproperty(node, "board-revision-int",
+				(char *) &rev, sizeof(rev));
+	if (r < 0)
+		return 0;
+
+	return be32_to_cpu(rev);
+}
+
+void __init olpc_dt_fixup(void)
+{
+	int r;
+	char buf[64];
+	phandle node;
+	u32 board_rev;
+
+	node = olpc_dt_finddevice("/battery@0");
+	if (!node)
+		return;
+
+	/*
+	 * If the battery node has a compatible property, we are running a new
+	 * enough firmware and don't have fixups to make.
+	 */
+	r = olpc_dt_getproperty(node, "compatible", buf, sizeof(buf));
+	if (r > 0)
+		return;
+
+	pr_info("PROM DT: Old firmware detected, applying fixes\n");
+
+	/* Add olpc,xo1-battery compatible marker to battery node */
+	olpc_dt_interpret("\" /battery@0\" find-device"
+		" \" olpc,xo1-battery\" +compatible"
+		" device-end");
+
+	board_rev = olpc_dt_get_board_revision();
+	if (!board_rev)
+		return;
+
+	if (board_rev >= olpc_board_pre(0xd0)) {
+		/* XO-1.5: add dcon device */
+		olpc_dt_interpret("\" /pci/display@1\" find-device"
+			" new-device"
+			" \" dcon\" device-name \" olpc,xo1-dcon\" +compatible"
+			" finish-device device-end");
+	} else {
+		/* XO-1: add dcon device, mark RTC as olpc,xo1-rtc */
+		olpc_dt_interpret("\" /pci/display@1,1\" find-device"
+			" new-device"
+			" \" dcon\" device-name \" olpc,xo1-dcon\" +compatible"
+			" finish-device device-end"
+			" \" /rtc\" find-device"
+			" \" olpc,xo1-rtc\" +compatible"
+			" device-end");
+	}
+}
+
 void __init olpc_dt_build_devicetree(void)
 {
 	phandle root;
@@ -172,6 +273,8 @@ void __init olpc_dt_build_devicetree(void)
 	if (!olpc_ofw_is_installed())
 		return;
 
+	olpc_dt_fixup();
+
 	root = olpc_dt_getsibling(0);
 	if (!root) {
 		pr_err("PROM: unable to get root node from OFW!\n");
-- 
1.7.5.2

[PATCH v2 10/11] x86, olpc: Add XO-1 RTC driver

[Daniel Drake]

Add a driver to configure the XO-1 RTC via CS5536 MSRs, to be used as a
system wakeup source via olpc-xo1-pm.

Device detection is based on finding the relevant device tree node.

Signed-off-by: Daniel Drake <dsd-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org>
Acked-by: Andres Salomon <dilinger-pFFUokh25LWsTnJN9+BGXg@public.gmane.org>
Acked-by: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
---
 .../devicetree/bindings/rtc/olpc-xo1-rtc.txt       |    5 +
 arch/x86/Kconfig                                   |    7 ++
 arch/x86/platform/olpc/Makefile                    |    1 +
 arch/x86/platform/olpc/olpc-xo1-rtc.c              |   82 ++++++++++++++++++++
 include/linux/cs5535.h                             |    5 +
 5 files changed, 100 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/rtc/olpc-xo1-rtc.txt
 create mode 100644 arch/x86/platform/olpc/olpc-xo1-rtc.c

diff --git a/Documentation/devicetree/bindings/rtc/olpc-xo1-rtc.txt b/Documentation/devicetree/bindings/rtc/olpc-xo1-rtc.txt
new file mode 100644
index 0000000..a2891ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/olpc-xo1-rtc.txt
@@ -0,0 +1,5 @@
+OLPC XO-1 RTC
+~~~~~~~~~~~~~
+
+Required properties:
+ - compatible : "olpc,xo1-rtc"
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 267a887..d8a6952 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2079,6 +2079,13 @@ config OLPC_XO1_PM
 	---help---
 	  Add support for poweroff and suspend of the OLPC XO-1 laptop.
 
+config OLPC_XO1_RTC
+	bool "OLPC XO-1 Real Time Clock"
+	depends on OLPC_XO1_PM && RTC_DRV_CMOS
+	---help---
+	  Add support for the XO-1 real time clock, which can be used as a
+	  programmable wakeup source.
+
 config OLPC_XO1_SCI
 	bool "OLPC XO-1 SCI extras"
 	depends on OLPC && OLPC_XO1_PM && POWER_SUPPLY
diff --git a/arch/x86/platform/olpc/Makefile b/arch/x86/platform/olpc/Makefile
index 1ec5ade..8922b9b 100644
--- a/arch/x86/platform/olpc/Makefile
+++ b/arch/x86/platform/olpc/Makefile
@@ -1,3 +1,4 @@
 obj-$(CONFIG_OLPC)		+= olpc.o olpc_ofw.o olpc_dt.o
 obj-$(CONFIG_OLPC_XO1_PM)		+= olpc-xo1-pm.o xo1-wakeup.o
+obj-$(CONFIG_OLPC_XO1_RTC)	+= olpc-xo1-rtc.o
 obj-$(CONFIG_OLPC_XO1_SCI)	+= olpc-xo1-sci.o
diff --git a/arch/x86/platform/olpc/olpc-xo1-rtc.c b/arch/x86/platform/olpc/olpc-xo1-rtc.c
new file mode 100644
index 0000000..476cc98
--- /dev/null
+++ b/arch/x86/platform/olpc/olpc-xo1-rtc.c
@@ -0,0 +1,82 @@
+/*
+ * Support for OLPC XO-1 Real Time Clock (RTC)
+ *
+ * Copyright (C) 2011 One Laptop per Child
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/mc146818rtc.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/of.h>
+
+#include <asm/msr.h>
+#include <asm/olpc.h>
+
+static void rtc_wake_on(struct device *dev)
+{
+	olpc_xo1_pm_wakeup_set(CS5536_PM_RTC);
+}
+
+static void rtc_wake_off(struct device *dev)
+{
+	olpc_xo1_pm_wakeup_clear(CS5536_PM_RTC);
+}
+
+static struct resource rtc_platform_resource[] = {
+	[0] = {
+		.start	= RTC_PORT(0),
+		.end	= RTC_PORT(1),
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		.start	= RTC_IRQ,
+		.end	= RTC_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct cmos_rtc_board_info rtc_info = {
+	.rtc_day_alarm = 0,
+	.rtc_mon_alarm = 0,
+	.rtc_century = 0,
+	.wake_on = rtc_wake_on,
+	.wake_off = rtc_wake_off,
+};
+
+static struct platform_device xo1_rtc_device = {
+	.name = "rtc_cmos",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(rtc_platform_resource),
+	.dev.platform_data = &rtc_info,
+	.resource = rtc_platform_resource,
+};
+
+static int __init xo1_rtc_init(void)
+{
+	int r;
+	struct device_node *node;
+
+	node = of_find_compatible_node(NULL, NULL, "olpc,xo1-rtc");
+	if (!node)
+		return 0;
+	of_node_put(node);
+
+	pr_info("olpc-xo1-rtc: Initializing OLPC XO-1 RTC\n");
+	rdmsrl(MSR_RTC_DOMA_OFFSET, rtc_info.rtc_day_alarm);
+	rdmsrl(MSR_RTC_MONA_OFFSET, rtc_info.rtc_mon_alarm);
+	rdmsrl(MSR_RTC_CEN_OFFSET, rtc_info.rtc_century);
+
+	r = platform_device_register(&xo1_rtc_device);
+	if (r)
+		return r;
+
+	device_init_wakeup(&xo1_rtc_device.dev, 1);
+	return 0;
+}
+arch_initcall(xo1_rtc_init);
+
diff --git a/include/linux/cs5535.h b/include/linux/cs5535.h
index 72954c6..c077aec 100644
--- a/include/linux/cs5535.h
+++ b/include/linux/cs5535.h
@@ -40,6 +40,10 @@
 #define MSR_MFGPT_NR		0x51400029
 #define MSR_MFGPT_SETUP		0x5140002B
 
+#define MSR_RTC_DOMA_OFFSET	0x51400055
+#define MSR_RTC_MONA_OFFSET	0x51400056
+#define MSR_RTC_CEN_OFFSET	0x51400057
+
 #define MSR_LX_SPARE_MSR	0x80000011	/* DC-specific */
 
 #define MSR_GX_GLD_MSR_CONFIG	0xC0002001
@@ -95,6 +99,7 @@ static inline int cs5535_pic_unreqz_select_high(unsigned int group,
 
 /* CS5536_PM1_EN bits */
 #define CS5536_PM_PWRBTN	(1 << 8)
+#define CS5536_PM_RTC		(1 << 10)
 
 /* CS5536_PM_GPE0_STS bits */
 #define CS5536_GPIOM7_PME_FLAG	(1 << 31)
-- 
1.7.5.2