From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Liam Girdwood <lrg@ti.com>, Grant Likely <grant.likely@secretlab.ca>
Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com,
devicetree-discuss@lists.ozlabs.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 1/5] ASoC: Add device tree binding for WM8711
Date: Wed, 3 Aug 2011 18:40:18 +0900 [thread overview]
Message-ID: <1312364422-8726-1-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
Documentation/devicetree/bindings/sound/wm8711.txt | 18 ++++++++++++++++++
sound/soc/codecs/wm8711.c | 9 +++++++++
2 files changed, 27 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/wm8711.txt
diff --git a/Documentation/devicetree/bindings/sound/wm8711.txt b/Documentation/devicetree/bindings/sound/wm8711.txt
new file mode 100644
index 0000000..8ed9998
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8711.txt
@@ -0,0 +1,18 @@
+WM8711 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+ - compatible : "wlf,wm8711"
+
+ - reg : the I2C address of the device for I2C, the chip select
+ number for SPI.
+
+Example:
+
+codec: wm8711@1a {
+ compatible = "wlf,wm8711";
+ reg = <0x1a>;
+};
diff --git a/sound/soc/codecs/wm8711.c b/sound/soc/codecs/wm8711.c
index e1db7e4..8457d3c 100644
--- a/sound/soc/codecs/wm8711.c
+++ b/sound/soc/codecs/wm8711.c
@@ -21,6 +21,7 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
+#include <linux/of_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -414,6 +415,12 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8711 = {
.num_dapm_routes = ARRAY_SIZE(wm8711_intercon),
};
+static const struct of_device_id wm8711_of_match[] = {
+ { .compatible = "wlf,wm8711", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, wm8711_of_match);
+
#if defined(CONFIG_SPI_MASTER)
static int __devinit wm8711_spi_probe(struct spi_device *spi)
{
@@ -445,6 +452,7 @@ static struct spi_driver wm8711_spi_driver = {
.driver = {
.name = "wm8711",
.owner = THIS_MODULE,
+ .of_match_table = wm8711_of_match,
},
.probe = wm8711_spi_probe,
.remove = __devexit_p(wm8711_spi_remove),
@@ -489,6 +497,7 @@ static struct i2c_driver wm8711_i2c_driver = {
.driver = {
.name = "wm8711",
.owner = THIS_MODULE,
+ .of_match_table = wm8711_of_match,
},
.probe = wm8711_i2c_probe,
.remove = __devexit_p(wm8711_i2c_remove),
--
1.7.5.4
next reply other threads:[~2011-08-03 9:40 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-03 9:40 Mark Brown [this message]
[not found] ` <1312364422-8726-1-git-send-email-broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2011-08-03 9:40 ` [PATCH 2/5] ASoC: Add device tree binding for WM8728 Mark Brown
2011-08-03 9:40 ` [PATCH 3/5] ASoC: Add device tree binding for WM8737 Mark Brown
2011-08-03 9:40 ` [PATCH 4/5] ASoC: Add device tree binding for WM8741 Mark Brown
2011-08-03 9:40 ` [PATCH 5/5] ASoC: Add device tree binding for WM8750 Mark Brown
2011-08-09 12:15 ` [PATCH 1/5] ASoC: Add device tree binding for WM8711 Liam Girdwood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1312364422-8726-1-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=lrg@ti.com \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).