From: "G, Manjunath Kondaiah" <manjugk@ti.com>
To: devicetree-discuss@lists.ozlabs.org
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
grant.likely@secretlab.ca, Kevin Hilman <khilman@ti.com>
Subject: [RFC/PATCH 02/14] OMAP: omap_device: replace debug/warning/error prints with dev_* macros
Date: Tue, 09 Aug 2011 19:10:20 +0500 [thread overview]
Message-ID: <1312897232-4792-3-git-send-email-manjugk@ti.com> (raw)
In-Reply-To: 1312897232-4792-1-git-send-email-manjugk@ti.com
From: Kevin Hilman <khilman@ti.com>
For consistency in kernel printk output for devices, use dev_dbg(),
dev_warn(), dev_err() instead of pr_debug(), pr_warning() and
pr_err(), some of which currently use direct access of name from
platform_device and others of which use dev_name(). Using the dev_*
versions uses the standard device naming from the driver core.
Some pr_* prints were not converted with this patch since they are
used before the platform_device and struct device are created so
neither the dev_* prints or dev_name() is valid.
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
---
arch/arm/plat-omap/omap_device.c | 70 +++++++++++++++++++-------------------
1 files changed, 35 insertions(+), 35 deletions(-)
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index c8b9cd1..1d69596 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -114,7 +114,7 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
{
struct timespec a, b, c;
- pr_debug("omap_device: %s: activating\n", od->pdev.name);
+ dev_dbg(&od->pdev.dev, "omap_device: activating\n");
while (od->pm_lat_level > 0) {
struct omap_device_pm_latency *odpl;
@@ -138,25 +138,24 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
c = timespec_sub(b, a);
act_lat = timespec_to_ns(&c);
- pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time "
- "%llu nsec\n", od->pdev.name, od->pm_lat_level,
- act_lat);
+ dev_dbg(&od->pdev.dev,
+ "omap_device: pm_lat %d: activate: elapsed time "
+ "%llu nsec\n", od->pm_lat_level, act_lat);
if (act_lat > odpl->activate_lat) {
odpl->activate_lat_worst = act_lat;
if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
odpl->activate_lat = act_lat;
- pr_warning("omap_device: %s.%d: new worst case "
- "activate latency %d: %llu\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, act_lat);
+ dev_warn(&od->pdev.dev,
+ "new worst case activate latency "
+ "%d: %llu\n",
+ od->pm_lat_level, act_lat);
} else
- pr_warning("omap_device: %s.%d: activate "
- "latency %d higher than exptected. "
- "(%llu > %d)\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, act_lat,
- odpl->activate_lat);
+ dev_warn(&od->pdev.dev,
+ "activate latency %d "
+ "higher than exptected. (%llu > %d)\n",
+ od->pm_lat_level, act_lat,
+ odpl->activate_lat);
}
od->dev_wakeup_lat -= odpl->activate_lat;
@@ -183,7 +182,7 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
{
struct timespec a, b, c;
- pr_debug("omap_device: %s: deactivating\n", od->pdev.name);
+ dev_dbg(&od->pdev.dev, "omap_device: deactivating\n");
while (od->pm_lat_level < od->pm_lats_cnt) {
struct omap_device_pm_latency *odpl;
@@ -206,28 +205,26 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
c = timespec_sub(b, a);
deact_lat = timespec_to_ns(&c);
- pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time "
- "%llu nsec\n", od->pdev.name, od->pm_lat_level,
- deact_lat);
+ dev_dbg(&od->pdev.dev,
+ "omap_device: pm_lat %d: deactivate: elapsed time "
+ "%llu nsec\n", od->pm_lat_level, deact_lat);
if (deact_lat > odpl->deactivate_lat) {
odpl->deactivate_lat_worst = deact_lat;
if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
odpl->deactivate_lat = deact_lat;
- pr_warning("omap_device: %s.%d: new worst case "
- "deactivate latency %d: %llu\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, deact_lat);
+ dev_warn(&od->pdev.dev,
+ "new worst case deactivate latency "
+ "%d: %llu\n",
+ od->pm_lat_level, deact_lat);
} else
- pr_warning("omap_device: %s.%d: deactivate "
- "latency %d higher than exptected. "
- "(%llu > %d)\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, deact_lat,
- odpl->deactivate_lat);
+ dev_warn(&od->pdev.dev,
+ "deactivate latency %d "
+ "higher than exptected. (%llu > %d)\n",
+ od->pm_lat_level, deact_lat,
+ odpl->deactivate_lat);
}
-
od->dev_wakeup_lat += odpl->activate_lat;
od->pm_lat_level++;
@@ -609,8 +606,9 @@ int omap_device_enable(struct platform_device *pdev)
od = to_omap_device(pdev);
if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
- WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
- od->pdev.name, od->pdev.id, __func__, od->_state);
+ dev_warn(&pdev->dev,
+ "omap_device: %s() called from invalid state %d\n",
+ __func__, od->_state);
return -EINVAL;
}
@@ -648,8 +646,9 @@ int omap_device_idle(struct platform_device *pdev)
od = to_omap_device(pdev);
if (od->_state != OMAP_DEVICE_STATE_ENABLED) {
- WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
- od->pdev.name, od->pdev.id, __func__, od->_state);
+ dev_warn(&pdev->dev,
+ "omap_device: %s() called from invalid state %d\n",
+ __func__, od->_state);
return -EINVAL;
}
@@ -680,8 +679,9 @@ int omap_device_shutdown(struct platform_device *pdev)
if (od->_state != OMAP_DEVICE_STATE_ENABLED &&
od->_state != OMAP_DEVICE_STATE_IDLE) {
- WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
- od->pdev.name, od->pdev.id, __func__, od->_state);
+ dev_warn(&pdev->dev,
+ "omap_device: %s() called from invalid state %d\n",
+ __func__, od->_state);
return -EINVAL;
}
--
1.7.1
next prev parent reply other threads:[~2011-08-09 14:10 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-09 14:10 [RFC/PATCH 00/14] dt: omap hwmod-dt binding and omap3 i2c1 dt support G, Manjunath Kondaiah
2011-08-09 14:10 ` [RFC/PATCH 01/14] OMAP: omap_device: replace _find_by_pdev() with to_omap_device() G, Manjunath Kondaiah
2011-08-09 14:10 ` G, Manjunath Kondaiah [this message]
2011-08-09 14:10 ` [RFC/PATCH 03/14] OMAP3: beagle: don't touch omap_device internals G, Manjunath Kondaiah
2011-08-09 14:10 ` [RFC/PATCH 04/14] OMAP: McBSP: use existing macros for converting between devices G, Manjunath Kondaiah
2011-08-10 7:07 ` Jarkko Nikula
2011-08-10 10:15 ` Cousson, Benoit
2011-08-10 16:05 ` G, Manjunath Kondaiah
2011-08-09 14:10 ` [RFC/PATCH 05/14] OMAP: omap_device: remove internal functions from omap_device.h G, Manjunath Kondaiah
2011-08-09 14:10 ` [RFC/PATCH 06/14] OMAP: omap_device: when building return platform_device instead of omap_device G, Manjunath Kondaiah
2011-08-09 14:10 ` [RFC/PATCH 07/14] ARM: platform_device: pdev_archdata: add omap_device pointer G, Manjunath Kondaiah
2011-08-09 14:10 ` [RFC/PATCH 08/14] omap2+: Use Kconfig symbol in Makefile instead of obj-y G, Manjunath Kondaiah
2011-08-09 14:10 ` [RFC/PATCH 09/14] dt: omap: prepare hwmod to support dt G, Manjunath Kondaiah
2011-08-10 11:51 ` Cousson, Benoit
2011-08-10 16:28 ` G, Manjunath Kondaiah
2011-08-10 17:11 ` Cousson, Benoit
2011-08-10 18:03 ` G, Manjunath Kondaiah
[not found] ` <CAC63_iSX0cjauOj=CcTABqgSWAgYRE_G7Qio5y2BrpeRnkhEWQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-08-10 18:06 ` Cousson, Benoit
2011-08-16 15:02 ` G, Manjunath Kondaiah
2011-08-09 14:10 ` [RFC/PATCH 10/14] dt: Add pd_size to AUXDATA structure G, Manjunath Kondaiah
[not found] ` <1312897232-4792-11-git-send-email-manjugk-l0cyMroinI0@public.gmane.org>
2011-08-10 11:57 ` Cousson, Benoit
2011-08-10 13:16 ` Grant Likely
2011-08-10 16:02 ` G, Manjunath Kondaiah
2011-08-09 14:10 ` [RFC/PATCH 11/14] dt: omap3: add soc file for handling i2c controllers G, Manjunath Kondaiah
2011-08-10 12:36 ` Cousson, Benoit
2011-08-10 16:57 ` G, Manjunath Kondaiah
2011-08-10 17:45 ` Cousson, Benoit
2011-08-16 6:32 ` G, Manjunath Kondaiah
2011-08-09 14:10 ` [RFC/PATCH 12/14] dt: omap3: beagle board: set clock freq for i2c devices G, Manjunath Kondaiah
2011-08-10 12:42 ` Cousson, Benoit
2011-08-10 16:45 ` G, Manjunath Kondaiah
2011-08-09 14:10 ` [RFC/PATCH 13/14] dt: omap3: add generic board file for dt support G, Manjunath Kondaiah
2011-08-09 14:10 ` [RFC/PATCH 14/14] dt: omap3: enable dt support for i2c1 controller G, Manjunath Kondaiah
2011-08-10 12:57 ` Cousson, Benoit
2011-08-16 18:44 ` G, Manjunath Kondaiah
2011-08-10 5:26 ` [RFC/PATCH 00/14] dt: omap hwmod-dt binding and omap3 i2c1 dt support Rajendra Nayak
2011-08-10 5:30 ` G, Manjunath Kondaiah
2011-08-10 5:39 ` Rajendra Nayak
2011-08-10 6:28 ` G, Manjunath Kondaiah
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1312897232-4792-3-git-send-email-manjugk@ti.com \
--to=manjugk@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=khilman@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).